The Hydra-Kool KFM-SF-100-S Refrigerated Fish Display Case
The Hydra-Kool KFM-SF-100-S is a 101-inch flat glass seafood case with 40.45 cubic feet of refrigerated display volume. This is where the KFM-SF series steps up to dual compressor architecture: two independent 1/2 HP refrigeration circuits each with their own power outlet and drain, multiplexed and joined together at the center to create over eight feet of continuous seafood display. That dual-circuit design means if one side needs service, the other half keeps running and holding temperature. The flat glass front panel offers more display volume than the curved glass equivalent at the same body width, so you get extra room for product in the same floor footprint.
Low Velocity Forced Air Cooling with Integrated Ice Pan
These seafood cases use low velocity forced air refrigeration to hold product between 33 and 40 degrees Fahrenheit while maintaining the high humidity that fresh fish needs to stay presentable throughout the day. Unlike standard deli cases that rely solely on air circulation, the KFM-SF series includes an integrated, non-removable heavy-duty ice pan built into the display deck. That ice bed lets you merchandise whole fish, fillets, and shellfish the way customers expect to see them at a quality seafood counter, sitting on a bed of crushed ice with cold air circulating above to keep surface temperatures consistent.
Because the ice pan drains continuously, these cases require floor drains at each unit location. Temperature and defrost cycles are regulated by a digital controller with a digital thermometer readout, so your staff can verify holding temps at a glance without opening the case. The self-contained condensing unit slides out for service access, and a coated evaporator coil resists corrosion from the humid, salt-air environment that comes with seafood display. CFC-free injected foam insulation lines the cabinet walls to minimize energy loss.
Flat Glass Display with Full Stainless Steel Interior
The tempered tilt-forward flat front glass gives customers a clear, direct view of your seafood spread, while tempered side glass panels keep product visible from every approach angle. The flat glass profile creates a slightly lower overall height than the curved glass version, which can be an advantage in stores where sightlines across the sales floor matter. Rear tempered glass sliding doors are removable for cleaning and let your team restock and rearrange product from behind the counter without reaching over the front.
LED lighting in the canopy illuminates the display from above, keeping colors true on fish skin, shrimp, and fillet cuts without adding heat to the cabinet. The full stainless steel interior and stainless steel rear work bench provide a durable, easy-to-clean surface that holds up to the constant moisture of a seafood display. The exterior features a silver colored PVC-coated steel front panel with foamed polystyrene black end panels and a black steel kick plate. Cases can be multiplexed end-to-end using optional joining kits to create a continuous seafood counter. Standard leveling feet keep the case stable, with optional adjustable stainless steel legs (5-1/8 to 7-5/8 inches) or casters (adding 4-3/8 inches to height) available for repositioning.
The KFM-SF-100-S measures 101.2 inches in overall length by 43-3/8 inches deep by 47-1/4 inches high. The dual self-contained compressors each draw 1/2 HP at 9.6 amps with 2x6.6 lights/fans/heaters amps and 2x10.6 total amps per circuit, requiring two 5-15P outlets and two floor drains. Net weight is 697 lbs and shipping weight is 974 lbs. The unit ships in a crate measuring 109 by 44 by 42 inches.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Flat glass seafood case designed for fresh fish display with integrated ice pan
-
40.45 cu. ft. front display volume
-
Temperature range: 33°F to 40°F
-
Low velocity forced air refrigeration maintains high humidity for seafood
-
Integrated, non-removable heavy-duty ice pan; two floor drains required
-
Dual self-contained refrigeration circuits, multiplexed and joined at center
-
R404a refrigerant
-
Requires two power outlets and two drains
-
Tempered tilt-forward flat front glass
-
Tempered side glass panels
-
Removable rear tempered glass sliding doors
-
LED lighting in canopy
-
Coated evaporator coil
-
Temperature and defrost regulated by digital controller
-
Digital thermometer
-
Stainless steel frame with full stainless steel interior
-
Stainless steel rear work bench
-
Silver colored PVC-coated steel front panel
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Slide-out condensing units
-
Cases can be multiplexed
-
Standard leveling feet; optional adjustable legs (5-1/8" to 7-5/8") or casters (+4-3/8" height)
-
2x 1/2 HP compressors, 2x 9.6 A, 2x 10.6 total amps, 2x 5-15P plugs
-
Engineered for locations not exceeding 75°F and 55% RH
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Hydra-Kool KFM-SF-100-S Refrigerated Fish Display Case
The Hydra-Kool KFM-SF-100-S is a 101-inch flat glass seafood case with 40.45 cubic feet of refrigerated display volume. This is where the KFM-SF series steps up to dual compressor architecture: two independent 1/2 HP refrigeration circuits each with their own power outlet and drain, multiplexed and joined together at the center to create over eight feet of continuous seafood display. That dual-circuit design means if one side needs service, the other half keeps running and holding temperature. The flat glass front panel offers more display volume than the curved glass equivalent at the same body width, so you get extra room for product in the same floor footprint.
Low Velocity Forced Air Cooling with Integrated Ice Pan
These seafood cases use low velocity forced air refrigeration to hold product between 33 and 40 degrees Fahrenheit while maintaining the high humidity that fresh fish needs to stay presentable throughout the day. Unlike standard deli cases that rely solely on air circulation, the KFM-SF series includes an integrated, non-removable heavy-duty ice pan built into the display deck. That ice bed lets you merchandise whole fish, fillets, and shellfish the way customers expect to see them at a quality seafood counter, sitting on a bed of crushed ice with cold air circulating above to keep surface temperatures consistent.
Because the ice pan drains continuously, these cases require floor drains at each unit location. Temperature and defrost cycles are regulated by a digital controller with a digital thermometer readout, so your staff can verify holding temps at a glance without opening the case. The self-contained condensing unit slides out for service access, and a coated evaporator coil resists corrosion from the humid, salt-air environment that comes with seafood display. CFC-free injected foam insulation lines the cabinet walls to minimize energy loss.
Flat Glass Display with Full Stainless Steel Interior
The tempered tilt-forward flat front glass gives customers a clear, direct view of your seafood spread, while tempered side glass panels keep product visible from every approach angle. The flat glass profile creates a slightly lower overall height than the curved glass version, which can be an advantage in stores where sightlines across the sales floor matter. Rear tempered glass sliding doors are removable for cleaning and let your team restock and rearrange product from behind the counter without reaching over the front.
LED lighting in the canopy illuminates the display from above, keeping colors true on fish skin, shrimp, and fillet cuts without adding heat to the cabinet. The full stainless steel interior and stainless steel rear work bench provide a durable, easy-to-clean surface that holds up to the constant moisture of a seafood display. The exterior features a silver colored PVC-coated steel front panel with foamed polystyrene black end panels and a black steel kick plate. Cases can be multiplexed end-to-end using optional joining kits to create a continuous seafood counter. Standard leveling feet keep the case stable, with optional adjustable stainless steel legs (5-1/8 to 7-5/8 inches) or casters (adding 4-3/8 inches to height) available for repositioning.
The KFM-SF-100-S measures 101.2 inches in overall length by 43-3/8 inches deep by 47-1/4 inches high. The dual self-contained compressors each draw 1/2 HP at 9.6 amps with 2x6.6 lights/fans/heaters amps and 2x10.6 total amps per circuit, requiring two 5-15P outlets and two floor drains. Net weight is 697 lbs and shipping weight is 974 lbs. The unit ships in a crate measuring 109 by 44 by 42 inches.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Flat glass seafood case designed for fresh fish display with integrated ice pan
-
40.45 cu. ft. front display volume
-
Temperature range: 33°F to 40°F
-
Low velocity forced air refrigeration maintains high humidity for seafood
-
Integrated, non-removable heavy-duty ice pan; two floor drains required
-
Dual self-contained refrigeration circuits, multiplexed and joined at center
-
R404a refrigerant
-
Requires two power outlets and two drains
-
Tempered tilt-forward flat front glass
-
Tempered side glass panels
-
Removable rear tempered glass sliding doors
-
LED lighting in canopy
-
Coated evaporator coil
-
Temperature and defrost regulated by digital controller
-
Digital thermometer
-
Stainless steel frame with full stainless steel interior
-
Stainless steel rear work bench
-
Silver colored PVC-coated steel front panel
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Slide-out condensing units
-
Cases can be multiplexed
-
Standard leveling feet; optional adjustable legs (5-1/8" to 7-5/8") or casters (+4-3/8" height)
-
2x 1/2 HP compressors, 2x 9.6 A, 2x 10.6 total amps, 2x 5-15P plugs
-
Engineered for locations not exceeding 75°F and 55% RH
Resources & Downloads
See all from Hydra-Kool
Specifications
| Overall Dimensions (L x D x H) | 101.2" x 43-3/8" x 47-1/4" |
| Front Display Volume | 40.45 cu. ft. |
| Temperature Range | 33°F to 40°F |
| Refrigeration Type | Low Velocity Forced Air, Self-Contained, Dual Circuit |
| Refrigerant | R404a |
| Compressor HP | 2x 1/2 |
| Compressor Amps (FLA) | 2x 9.6 A |
| Lights/Fans/Heaters Amps | 2x 0.06 A |
| Total Amps | 2x 10.6 A |
| NEMA Plug | 2x 5-15P |
| Voltage | 115V |
| Power Outlets Required | 2 |
| Floor Drains Required | 2 |
| Configuration | Multiplexed, Joined at Center |
| Ice Pan | Integrated, Non-Removable Heavy-Duty |
| Evaporator Coil | Coated |
| Insulation | CFC-Free Injected Foam |
| Front Glass | Tempered Tilt-Forward Flat Glass |
| Side Glass | Tempered |
| Rear Doors | Removable Tempered Glass Sliding Doors |
| Interior | Stainless Steel |
| Rear Work Bench | Stainless Steel |
| Front Panel | Silver Colored PVC-Coated Steel |
| End Panels | Foamed Polystyrene, Black |
| Kick Plate | Black Steel |
| Lighting | LED in Canopy |
| Temperature Control | Digital Controller with Digital Thermometer |
| Condensing Unit | Slide-Out |
| Standard Mounting | Leveling Feet |
| Optional Mounting | Adjustable Legs (5-1/8" to 7-5/8") or Casters (+4-3/8") |
| Multiplexing | Yes, with Optional Joining Kit |
| Operating Environment | Max 75°F, 55% RH |
| Net Weight | 697 lbs |
| Shipping Weight | 974 lbs |
| Crate Size (L x W x H) | 109" x 44" x 42" |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
4 Year
Compressor (Parts Only)
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

