The Hydra-Kool KFM-SO-120-S Refrigerated Fish Display Case
The Hydra-Kool KFM-SO-120-S is the largest model in the open-front seafood case lineup, stretching nearly ten feet with 18.58 cubic feet of refrigerated display volume. Like the 100-inch model, it uses dual 1/2 HP compressor circuits multiplexed and joined at the center, each requiring its own power outlet and floor drain. That almost ten feet of continuous open-front, ice-bedded display lets a full-service seafood department lay out an entire selection of whole fish, steaks, fillets, crab legs, shrimp, oysters, and prepared items all within a single low-profile case run that customers can browse without any glass getting in the way.
Low Velocity Forced Air Cooling with Integrated Ice Pan
These open-front seafood cases use low velocity forced air refrigeration to hold product between 33 and 40 degrees Fahrenheit while maintaining the high humidity that fresh fish needs to stay presentable throughout the day. The KFM-SO series includes an integrated, non-removable heavy-duty ice pan built into the display deck, so you can merchandise whole fish, fillets, and shellfish on a bed of crushed ice just like a traditional fish market counter. The open-front design means customers can see and select product without any glass barrier between them and the display, making it ideal for self-serve or assisted-serve seafood stations.
Because the ice pan drains continuously, these cases require floor drains at each unit location. Temperature and defrost cycles are regulated by a digital controller with a digital thermometer readout, so your staff can verify holding temps at a glance. The self-contained condensing unit slides out for service access, and a coated evaporator coil resists corrosion from the humid, salt-air environment that comes with seafood display. CFC-free injected foam insulation lines the cabinet walls to minimize energy loss.
Low Profile Open-Front Construction
At just 34-9/16 inches tall, these open-front cases sit well below eye level, which makes them easy to merchandise and gives customers a direct, unobstructed view of the entire seafood spread from the shopping aisle. Tempered front and side glass panels protect the display while keeping product accessible. The low profile also means you can position signage or menu boards above the case without blocking sightlines to other areas of the store.
The full stainless steel interior and stainless steel rear work bench provide a durable, sanitary surface that holds up to the constant moisture of a seafood display. The exterior features a silver colored PVC-coated steel front panel with foamed polystyrene black end panels and a black steel kick plate. Cases can be multiplexed end-to-end using optional joining kits to create a continuous seafood counter. Standard leveling feet keep the case stable, with optional adjustable stainless steel legs (5-1/8 to 7-5/8 inches) or casters (adding 4-3/8 inches to height) available for repositioning.
The KFM-SO-120-S measures 117 inches in overall length by 43-3/4 inches deep by 34-9/16 inches high. The dual self-contained compressors each draw 1/2 HP at 9.6 amps with 2x0.96 lights/fans amps and 2x10.7 total amps per circuit, requiring two 5-15P outlets and two floor drains. Net weight is 681 lbs and shipping weight is 1,053 lbs. The unit ships in a crate measuring 124 by 44 by 42 inches.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Open front seafood case designed for fresh fish display with integrated ice pan
-
18.58 cu. ft. front display volume
-
Temperature range: 33°F to 40°F
-
Low velocity forced air refrigeration maintains high humidity for seafood
-
Integrated, non-removable heavy-duty ice pan; two floor drains required
-
Dual self-contained refrigeration circuits, multiplexed and joined at center
-
R404a refrigerant
-
Requires two power outlets and two drains
-
Open front design for easy customer access
-
Tempered front and side glass
-
Coated evaporator coil
-
Temperature and defrost regulated by digital controller
-
Digital thermometer
-
Stainless steel frame with full stainless steel interior
-
Stainless steel rear work bench
-
Silver colored PVC-coated steel front panel
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Slide-out condensing units
-
Cases can be multiplexed
-
Standard leveling feet; optional adjustable legs (5-1/8" to 7-5/8") or casters (+4-3/8" height)
-
2x 1/2 HP compressors, 2x 9.6 A, 2x 10.7 total amps, 2x 5-15P plugs
-
Engineered for locations not exceeding 75°F and 55% RH
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Hydra-Kool KFM-SO-120-S Refrigerated Fish Display Case
The Hydra-Kool KFM-SO-120-S is the largest model in the open-front seafood case lineup, stretching nearly ten feet with 18.58 cubic feet of refrigerated display volume. Like the 100-inch model, it uses dual 1/2 HP compressor circuits multiplexed and joined at the center, each requiring its own power outlet and floor drain. That almost ten feet of continuous open-front, ice-bedded display lets a full-service seafood department lay out an entire selection of whole fish, steaks, fillets, crab legs, shrimp, oysters, and prepared items all within a single low-profile case run that customers can browse without any glass getting in the way.
Low Velocity Forced Air Cooling with Integrated Ice Pan
These open-front seafood cases use low velocity forced air refrigeration to hold product between 33 and 40 degrees Fahrenheit while maintaining the high humidity that fresh fish needs to stay presentable throughout the day. The KFM-SO series includes an integrated, non-removable heavy-duty ice pan built into the display deck, so you can merchandise whole fish, fillets, and shellfish on a bed of crushed ice just like a traditional fish market counter. The open-front design means customers can see and select product without any glass barrier between them and the display, making it ideal for self-serve or assisted-serve seafood stations.
Because the ice pan drains continuously, these cases require floor drains at each unit location. Temperature and defrost cycles are regulated by a digital controller with a digital thermometer readout, so your staff can verify holding temps at a glance. The self-contained condensing unit slides out for service access, and a coated evaporator coil resists corrosion from the humid, salt-air environment that comes with seafood display. CFC-free injected foam insulation lines the cabinet walls to minimize energy loss.
Low Profile Open-Front Construction
At just 34-9/16 inches tall, these open-front cases sit well below eye level, which makes them easy to merchandise and gives customers a direct, unobstructed view of the entire seafood spread from the shopping aisle. Tempered front and side glass panels protect the display while keeping product accessible. The low profile also means you can position signage or menu boards above the case without blocking sightlines to other areas of the store.
The full stainless steel interior and stainless steel rear work bench provide a durable, sanitary surface that holds up to the constant moisture of a seafood display. The exterior features a silver colored PVC-coated steel front panel with foamed polystyrene black end panels and a black steel kick plate. Cases can be multiplexed end-to-end using optional joining kits to create a continuous seafood counter. Standard leveling feet keep the case stable, with optional adjustable stainless steel legs (5-1/8 to 7-5/8 inches) or casters (adding 4-3/8 inches to height) available for repositioning.
The KFM-SO-120-S measures 117 inches in overall length by 43-3/4 inches deep by 34-9/16 inches high. The dual self-contained compressors each draw 1/2 HP at 9.6 amps with 2x0.96 lights/fans amps and 2x10.7 total amps per circuit, requiring two 5-15P outlets and two floor drains. Net weight is 681 lbs and shipping weight is 1,053 lbs. The unit ships in a crate measuring 124 by 44 by 42 inches.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Open front seafood case designed for fresh fish display with integrated ice pan
-
18.58 cu. ft. front display volume
-
Temperature range: 33°F to 40°F
-
Low velocity forced air refrigeration maintains high humidity for seafood
-
Integrated, non-removable heavy-duty ice pan; two floor drains required
-
Dual self-contained refrigeration circuits, multiplexed and joined at center
-
R404a refrigerant
-
Requires two power outlets and two drains
-
Open front design for easy customer access
-
Tempered front and side glass
-
Coated evaporator coil
-
Temperature and defrost regulated by digital controller
-
Digital thermometer
-
Stainless steel frame with full stainless steel interior
-
Stainless steel rear work bench
-
Silver colored PVC-coated steel front panel
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Slide-out condensing units
-
Cases can be multiplexed
-
Standard leveling feet; optional adjustable legs (5-1/8" to 7-5/8") or casters (+4-3/8" height)
-
2x 1/2 HP compressors, 2x 9.6 A, 2x 10.7 total amps, 2x 5-15P plugs
-
Engineered for locations not exceeding 75°F and 55% RH
Resources & Downloads
See all from Hydra-Kool
Specifications
| Overall Dimensions (L x D x H) | 117" x 43-3/4" x 34-9/16" |
| Front Display Volume | 18.58 cu. ft. |
| Temperature Range | 33°F to 40°F |
| Refrigeration Type | Low Velocity Forced Air, Self-Contained, Dual Circuit |
| Refrigerant | R404a |
| Compressor HP | 2x 1/2 |
| Compressor Amps (FLA) | 2x 9.6 A |
| Lights/Fans Amps | 2x 0.96 A |
| Total Amps | 2x 10.7 A |
| NEMA Plug | 2x 5-15P |
| Voltage | 115V |
| Power Outlets Required | 2 |
| Floor Drains Required | 2 |
| Configuration | Multiplexed, Joined at Center |
| Ice Pan | Integrated, Non-Removable Heavy-Duty |
| Evaporator Coil | Coated |
| Insulation | CFC-Free Injected Foam |
| Front and Side Glass | Tempered |
| Display Style | Open Front |
| Interior | Stainless Steel |
| Rear Work Bench | Stainless Steel |
| Front Panel | Silver Colored PVC-Coated Steel |
| End Panels | Foamed Polystyrene, Black |
| Kick Plate | Black Steel |
| Temperature Control | Digital Controller with Digital Thermometer |
| Condensing Unit | Slide-Out |
| Standard Mounting | Leveling Feet |
| Optional Mounting | Adjustable Legs (5-1/8" to 7-5/8") or Casters (+4-3/8") |
| Multiplexing | Yes, with Optional Joining Kit |
| Operating Environment | Max 75°F, 55% RH |
| Net Weight | 681 lbs |
| Shipping Weight | 1,053 lbs |
| Crate Size (L x W x H) | 124" x 44" x 42" |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
4 Year
Compressor (Parts Only)
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

