The Hydra-Kool KGL-OF-60-S Open Air Merchandiser
The Hydra-Kool KGL-OF-60-S is a 61-inch self-contained low profile open-front grab-and-go merchandiser with 19.85 cubic feet of front display capacity. This is the widest model in the KGL-OF series, offering five feet of merchandising space while standing under 60 inches tall. It works well as a freestanding island or along a wall in grocery delis, large convenience stores, and cafeteria serving lines where you want grab-and-go access without a tall case blocking sightlines. The case holds 36°F to 40°F on 115V hard-wired power at 24.06 amps and multiplexes with other KGL-OF units.
Open Front with Pull-Down Night Curtain and Tempered Side Glass
The open front gives customers instant access to grab cold drinks, sandwiches, salads, and snacks without waiting for a door to open. When the store closes, a pull-down night curtain seals the display to hold temperature overnight and cut energy use. Tempered side glass panels let shoppers see product from the aisle, which helps draw attention to items they might not notice in a closed case. The low profile height makes this case a good fit for locations where sightlines matter, like in front of a service counter or along a checkout path where a taller case would block the view.
Forced Air Refrigeration with Slide-Out Condensing Unit and Digital Control
Forced air refrigeration circulates cold air evenly across the shelves, holding product between 36°F and 40°F from front to back. A digital controller handles temperature and defrost cycles, and a digital thermometer on the case lets you check conditions at a glance. The self-contained condensing unit slides out from the base for service, so a technician can clean coils or check the refrigerant charge without pulling the whole case away from the wall. A removable condensate evaporating pan collects moisture and lifts out easily for cleaning. The system uses R404a refrigerant and CFC-free injected foam insulation.
Height-Adjustable Tiltable Shelves with Product Stops and LED Lighting
Two adjustable shelves accommodate different product heights and can be tilted forward to angle items toward the customer for better visibility. Product stops on the shelves keep containers from sliding off the front edge when shoppers reach in. LED strips in the canopy and under each shelf light products from above and below, keeping labels readable and colors true across the full depth of the case. LEDs generate less heat than fluorescent tubes, which reduces the thermal load on the compressor and helps the case hold temperature more efficiently.
The KGL-OF-60-S measures 60.6" wide x 31.25" deep x 59.5" high and weighs 454 lbs. The exterior front panel is silver colored PVC coated steel, the interior is PVC coated steel in gray, and the end panels are foamed polystyrene in black with a black steel kick plate at the base. Hard-wired (no plug). Optional upgrades include stainless steel interior and exterior panels, additional shelves, a joining kit for multiplexing, price tag molding, partition dividers, and casters that add 4-3/8" to the overall height. Stainless steel adjustable legs (5-1/8" to 7-5/8") are also available.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Ideal for convenience stores, grocery grab-and-go sections, cafeterias, and campus dining displaying cold beverages, sandwiches, salads, and packaged snacks
-
19.85 cu. ft. front display capacity
-
Temperature range: 36°F to 40°F
-
Low profile design (under 60" tall) for clear sightlines
-
Open front for quick customer self-service
-
Pull-down night curtain for overnight temperature retention
-
Forced air refrigeration, self-contained
-
Compressor: 3/4 HP, 16 FLA
-
R404a refrigerant
-
Two height-adjustable shelves with tilt capability
-
Product stops on shelves
-
LED lighting in canopy and under all shelves
-
Digital temperature and defrost controller with digital thermometer
-
Removable condensate evaporating pan
-
Slide-out condensing unit for service access
-
Multiplexible: cases can be joined for longer display runs
-
Tempered side glass panels
-
Silver colored PVC coated steel front panel
-
PVC coated steel gray interior
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Levelling feet included
-
Hard-wired (no plug)
-
Total amperage: 24.06 A
-
Overall dimensions: 60.6" W x 31.25" D x 59.5" H
-
Net weight: 454 lbs
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Hydra-Kool KGL-OF-60-S Open Air Merchandiser
The Hydra-Kool KGL-OF-60-S is a 61-inch self-contained low profile open-front grab-and-go merchandiser with 19.85 cubic feet of front display capacity. This is the widest model in the KGL-OF series, offering five feet of merchandising space while standing under 60 inches tall. It works well as a freestanding island or along a wall in grocery delis, large convenience stores, and cafeteria serving lines where you want grab-and-go access without a tall case blocking sightlines. The case holds 36°F to 40°F on 115V hard-wired power at 24.06 amps and multiplexes with other KGL-OF units.
Open Front with Pull-Down Night Curtain and Tempered Side Glass
The open front gives customers instant access to grab cold drinks, sandwiches, salads, and snacks without waiting for a door to open. When the store closes, a pull-down night curtain seals the display to hold temperature overnight and cut energy use. Tempered side glass panels let shoppers see product from the aisle, which helps draw attention to items they might not notice in a closed case. The low profile height makes this case a good fit for locations where sightlines matter, like in front of a service counter or along a checkout path where a taller case would block the view.
Forced Air Refrigeration with Slide-Out Condensing Unit and Digital Control
Forced air refrigeration circulates cold air evenly across the shelves, holding product between 36°F and 40°F from front to back. A digital controller handles temperature and defrost cycles, and a digital thermometer on the case lets you check conditions at a glance. The self-contained condensing unit slides out from the base for service, so a technician can clean coils or check the refrigerant charge without pulling the whole case away from the wall. A removable condensate evaporating pan collects moisture and lifts out easily for cleaning. The system uses R404a refrigerant and CFC-free injected foam insulation.
Height-Adjustable Tiltable Shelves with Product Stops and LED Lighting
Two adjustable shelves accommodate different product heights and can be tilted forward to angle items toward the customer for better visibility. Product stops on the shelves keep containers from sliding off the front edge when shoppers reach in. LED strips in the canopy and under each shelf light products from above and below, keeping labels readable and colors true across the full depth of the case. LEDs generate less heat than fluorescent tubes, which reduces the thermal load on the compressor and helps the case hold temperature more efficiently.
The KGL-OF-60-S measures 60.6" wide x 31.25" deep x 59.5" high and weighs 454 lbs. The exterior front panel is silver colored PVC coated steel, the interior is PVC coated steel in gray, and the end panels are foamed polystyrene in black with a black steel kick plate at the base. Hard-wired (no plug). Optional upgrades include stainless steel interior and exterior panels, additional shelves, a joining kit for multiplexing, price tag molding, partition dividers, and casters that add 4-3/8" to the overall height. Stainless steel adjustable legs (5-1/8" to 7-5/8") are also available.
About Hydra-Kool
Hydra-Kool manufactures refrigerated display cases designed for food retail and foodservice environments where product visibility and temperature control are critical. The line includes bakery, deli, seafood, and gelato cases, along with open display merchandisers and glass door wall units. Equipment is configured to support merchandising while maintaining consistent holding conditions across different product types. Cases are built with accessible components to allow for routine cleaning and service. Hydra-Kool units are used in supermarkets, specialty shops, and prepared food operations. Replacement parts support and established service channels help operators maintain performance and manage ongoing upkeep.
Features & Benefits
-
Ideal for convenience stores, grocery grab-and-go sections, cafeterias, and campus dining displaying cold beverages, sandwiches, salads, and packaged snacks
-
19.85 cu. ft. front display capacity
-
Temperature range: 36°F to 40°F
-
Low profile design (under 60" tall) for clear sightlines
-
Open front for quick customer self-service
-
Pull-down night curtain for overnight temperature retention
-
Forced air refrigeration, self-contained
-
Compressor: 3/4 HP, 16 FLA
-
R404a refrigerant
-
Two height-adjustable shelves with tilt capability
-
Product stops on shelves
-
LED lighting in canopy and under all shelves
-
Digital temperature and defrost controller with digital thermometer
-
Removable condensate evaporating pan
-
Slide-out condensing unit for service access
-
Multiplexible: cases can be joined for longer display runs
-
Tempered side glass panels
-
Silver colored PVC coated steel front panel
-
PVC coated steel gray interior
-
Foamed polystyrene black end panels
-
Black steel kick plate
-
CFC-free injected foam insulation
-
Levelling feet included
-
Hard-wired (no plug)
-
Total amperage: 24.06 A
-
Overall dimensions: 60.6" W x 31.25" D x 59.5" H
-
Net weight: 454 lbs
Resources & Downloads
See all from Hydra-Kool
Specifications
| Front Display Capacity | 19.85 cu. ft. |
| Temperature Range | 36°F to 40°F |
| Cooling System | Forced Air, Self-Contained |
| Refrigerant | R404a |
| Compressor HP | 3/4 |
| Compressor FLA | 16 A |
| Total Amperage | 24.06 A |
| Voltage | 115V / 60Hz / 1Ph |
| Connection | Hard-wired |
| Front | Open with pull-down night curtain |
| Side Glass | Tempered |
| Shelves | 2 height-adjustable, tiltable, with product stops |
| Lighting | LED in canopy and under all shelves |
| Temperature Control | Digital controller with digital thermometer |
| Exterior Front Panel | Silver colored PVC coated steel |
| Interior | PVC coated steel, gray |
| End Panels | Foamed polystyrene, black |
| Kick Plate | Black steel |
| Insulation | CFC-free injected foam |
| Condensate Management | Removable evaporating pan |
| Condensing Unit | Slide-out for service access |
| Feet | Levelling feet |
| Overall Dimensions (W x D x H) | 60.6" x 31.25" x 59.5" |
| Net Weight | 454 lbs |
| Shipping Weight | 653 lbs |
| Crate Dimensions (L x W x H) | 63.5" x 34.5" x 67.8" |
| Operating Environment | Max 75°F, 55% RH |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
-
5 Year
Compressor (parts only)
Certifications & Approvals
-
ETL US & Canada
-
ETL Sanitation

