Skip to content

Manitowoc IDP1000AP 970 lb Indigo NXT Correctional Modular Ice Machine Head, Air-Cooled, Full-Dice Cubes, Stainless Panels

SKUIDP1000AP BrandManitowoc

The Manitowoc IDP1000AP Modular Full Cube Ice Machine Head

The Manitowoc IDP1000AP is the correctional package of the Indigo NXT 970 lb 30 in. wide modular head, an air-cooled full-dice ice machine head built for correctional and secure facilities that need high-capacity, tamper-resistant ice production. The correctional package removes every piece of exterior plastic and replaces it with stainless steel top, front, and side panels, stainless louvers, and tamper-proof screws, while the head still produces up to 970 lb of dice ice per 24 hours at 70°F air and 50°F water (790 lb at 90°F air and 70°F water). As a machine head with no bin attached, it pairs with a D400 or D570 storage bin sized to your facility. It shares its ratings with the standard IDP1000A, so choose this version only when the security package matters; a standard head costs less and installs identically in a commercial kitchen. Plan on a 208-230V single-phase circuit with a three-phase version available, a 3/8 in. water line, a 3/4 in. bin drain, and 8 in. of top and side clearance; the storage bin is sold separately.

Icon-Based Touch Display with Programmable Ice Production Schedules

The icon-based easyTouch display takes the guesswork out of owning an ice machine: staff pick their language in the start-up wizard, follow on-screen icons for day-to-day operation, and get automatic reminder and alert icons instead of blinking fault codes. Production is programmable by time of day, by daily volume, or with an overnight shutoff, so the head can build its reserve when electric rates drop rather than fighting for power during the dinner rush. On this correctional model the display sits protected behind the front door, out of reach of casual tampering.

R290 Natural Refrigerant with Acoustical Ice Sensing and Active Sense

The refrigeration system runs on R290 with a 15.9 oz charge, a refrigerant-grade propane that occurs naturally, depletes no ozone, and carries extremely low global warming potential. The patented acoustical ice sensing probe works with Active Sense software to deliver consistent harvests even in challenging water conditions, and the air-cooled self-contained condenser rejects 13,980 average, 16,030 peak BTU per hour while the machine holds spec from 35°F to 110°F ambient and 40°F to 90°F incoming water.

Hinged Front Door and Removable Water-System Parts with AlphaSan Protection

Cleaning is where most ice machines lose their owners, so Manitowoc made the food zone come apart without tools: the front door swings open on a hinge, and the water trough, distribution tube, curtain, water probe, and water pump all lift out for fast, thorough cleaning at the sink instead of awkward in-place scrubbing. Select components carry AlphaSan antimicrobial protection to keep the food zone cleaner between those sessions.

DuraTech Exterior and 24-Hour Diagnostics for Long Service Life

Where standard Indigo NXT heads wear a DuraTech finish, this correctional build goes further: stainless steel top and front panels, stainless side panels with stainless louvers, and no plastic anywhere on the outside of the machine. Tamper-proof screws use two different head designs, one for the front panel and one for the back cover, and both require special bits that ship in the start-up package, so panels stay closed to anyone without the right tools. Underneath, 24-hour intelligent diagnostics monitor the machine continuously and flag preventative maintenance before a small issue becomes a down day.

LuminIce II, Water Filtration, and Automated Cleaning Accessories

The optional LuminIce II growth inhibitor controls viruses and bacteria inside the food zone and reports its status through an icon on the display. The iAuCS accessory schedules and performs routine descaling or sanitizing automatically, turning a dreaded quarterly chore into a background task, and Arctic Pure Pro water filters cut sediment and chlorine contaminants down to 0.5 microns when the prefilter and primary filter run together.

Features & Benefits

  1. Tamper-resistant high-capacity head for correctional facilities needing dependable ice
  2. Stainless steel panels, stainless louvers, and tamper-proof fasteners for secure installations
  3. Modular head design that pairs with separately sold Manitowoc D-series storage bins
  4. Icon-based easyTouch display with multilingual menus for guided daily operation
  5. Programmable ice production by time, day, or volume to use off-peak electric rates
  6. Acoustical ice sensing probe with Active Sense for reliable harvests in challenging water
  7. 24-hour intelligent diagnostics with continuous status feedback for preventative maintenance
  8. Hinged front door with removable trough, tube, curtain, probe, and pump for cleaning
  9. AlphaSan antimicrobial protection in select components for a cleaner food zone
  10. R290 natural refrigerant with zero ozone depletion and extremely low global warming potential
  11. Optional LuminIce II growth inhibitor with a sanitation status icon on the display

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$7,810.86
  • Tamper-resistant high-capacity head for correctional facilities needing dependable ice
  • Stainless steel panels, stainless louvers, and tamper-proof fasteners for secure installations
  • Modular head design that pairs with separately sold Manitowoc D-series storage bins
  • Icon-based easyTouch display with multilingual menus for guided daily operation
  • Programmable ice production by time, day, or volume to use off-peak electric rates
  • See full feature list

    The Manitowoc IDP1000AP Modular Full Cube Ice Machine Head

    The Manitowoc IDP1000AP is the correctional package of the Indigo NXT 970 lb 30 in. wide modular head, an air-cooled full-dice ice machine head built for correctional and secure facilities that need high-capacity, tamper-resistant ice production. The correctional package removes every piece of exterior plastic and replaces it with stainless steel top, front, and side panels, stainless louvers, and tamper-proof screws, while the head still produces up to 970 lb of dice ice per 24 hours at 70°F air and 50°F water (790 lb at 90°F air and 70°F water). As a machine head with no bin attached, it pairs with a D400 or D570 storage bin sized to your facility. It shares its ratings with the standard IDP1000A, so choose this version only when the security package matters; a standard head costs less and installs identically in a commercial kitchen. Plan on a 208-230V single-phase circuit with a three-phase version available, a 3/8 in. water line, a 3/4 in. bin drain, and 8 in. of top and side clearance; the storage bin is sold separately.

    Icon-Based Touch Display with Programmable Ice Production Schedules

    The icon-based easyTouch display takes the guesswork out of owning an ice machine: staff pick their language in the start-up wizard, follow on-screen icons for day-to-day operation, and get automatic reminder and alert icons instead of blinking fault codes. Production is programmable by time of day, by daily volume, or with an overnight shutoff, so the head can build its reserve when electric rates drop rather than fighting for power during the dinner rush. On this correctional model the display sits protected behind the front door, out of reach of casual tampering.

    R290 Natural Refrigerant with Acoustical Ice Sensing and Active Sense

    The refrigeration system runs on R290 with a 15.9 oz charge, a refrigerant-grade propane that occurs naturally, depletes no ozone, and carries extremely low global warming potential. The patented acoustical ice sensing probe works with Active Sense software to deliver consistent harvests even in challenging water conditions, and the air-cooled self-contained condenser rejects 13,980 average, 16,030 peak BTU per hour while the machine holds spec from 35°F to 110°F ambient and 40°F to 90°F incoming water.

    Hinged Front Door and Removable Water-System Parts with AlphaSan Protection

    Cleaning is where most ice machines lose their owners, so Manitowoc made the food zone come apart without tools: the front door swings open on a hinge, and the water trough, distribution tube, curtain, water probe, and water pump all lift out for fast, thorough cleaning at the sink instead of awkward in-place scrubbing. Select components carry AlphaSan antimicrobial protection to keep the food zone cleaner between those sessions.

    DuraTech Exterior and 24-Hour Diagnostics for Long Service Life

    Where standard Indigo NXT heads wear a DuraTech finish, this correctional build goes further: stainless steel top and front panels, stainless side panels with stainless louvers, and no plastic anywhere on the outside of the machine. Tamper-proof screws use two different head designs, one for the front panel and one for the back cover, and both require special bits that ship in the start-up package, so panels stay closed to anyone without the right tools. Underneath, 24-hour intelligent diagnostics monitor the machine continuously and flag preventative maintenance before a small issue becomes a down day.

    LuminIce II, Water Filtration, and Automated Cleaning Accessories

    The optional LuminIce II growth inhibitor controls viruses and bacteria inside the food zone and reports its status through an icon on the display. The iAuCS accessory schedules and performs routine descaling or sanitizing automatically, turning a dreaded quarterly chore into a background task, and Arctic Pure Pro water filters cut sediment and chlorine contaminants down to 0.5 microns when the prefilter and primary filter run together.

    Features & Benefits

    1. Tamper-resistant high-capacity head for correctional facilities needing dependable ice
    2. Stainless steel panels, stainless louvers, and tamper-proof fasteners for secure installations
    3. Modular head design that pairs with separately sold Manitowoc D-series storage bins
    4. Icon-based easyTouch display with multilingual menus for guided daily operation
    5. Programmable ice production by time, day, or volume to use off-peak electric rates
    6. Acoustical ice sensing probe with Active Sense for reliable harvests in challenging water
    7. 24-hour intelligent diagnostics with continuous status feedback for preventative maintenance
    8. Hinged front door with removable trough, tube, curtain, probe, and pump for cleaning
    9. AlphaSan antimicrobial protection in select components for a cleaner food zone
    10. R290 natural refrigerant with zero ozone depletion and extremely low global warming potential
    11. Optional LuminIce II growth inhibitor with a sanitation status icon on the display

    Resources & Downloads

    Specifications

    Ice Production (70°F Air / 50°F Water)970 lb per 24 hours
    Ice Production (90°F Air / 70°F Water)790 lb per 24 hours
    Ice ShapeDice (full cube)
    Cube Size7/8 in. x 7/8 in. x 7/8 in.
    Condenser TypeAir-cooled, self-contained
    Width30.00 in.
    Depth24.50 in.
    Height29.50 in. (machine head only)
    ExteriorStainless steel top, front, and side panels
    LouversStainless steel
    Exterior PlasticNone
    Security HardwareTamper-proof screws, special bits included
    Compatible Storage BinsManitowoc D400 (365 lb) or D570 (532 lb), sold separately
    RefrigerantR290, 15.9 oz charge
    Heat Rejection13,980 average, 16,030 peak BTU/hr
    Electrical208-230V/60/1 standard, 208-230V/60/3 available
    Minimum Circuit Ampacity10 amps (1 phase), 6.4 amps (3 phase)
    Maximum Fuse Size15 amps
    Energy Usage4.65 kWh per 100 lb of ice at 90°F/70°F
    Potable Water Usage13.9 gal per 100 lb of ice
    Ice Making Water Inlet3/8 in. FPT
    Ice Making Water Outlet1/2 in. FPT
    Bin Drain3/4 in.
    Water Pressure (Ice Maker)20 psi minimum, 80 psi maximum
    Ambient Temperature Range35°F to 110°F
    Water Temperature Range40°F to 90°F
    Clearance8 in. top and sides, 5 in. back
    Shipping Weight206 lbs

    Manufacturer's Warranty

    • 5 Year

      Compressor

    • 5 Year

      Evaporator

    • 3 Year

      Labor

    • 3 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Manitowoc IDP1000AP Modular Full Cube Ice Machine Head

    Product Features

    1. Tamper-resistant high-capacity head for correctional facilities needing dependable ice
    2. Stainless steel panels, stainless louvers, and tamper-proof fasteners for secure installations
    3. Modular head design that pairs with separately sold Manitowoc D-series storage bins
    4. Icon-based easyTouch display with multilingual menus for guided daily operation
    5. Programmable ice production by time, day, or volume to use off-peak electric rates
    6. Acoustical ice sensing probe with Active Sense for reliable harvests in challenging water
    7. 24-hour intelligent diagnostics with continuous status feedback for preventative maintenance
    8. Hinged front door with removable trough, tube, curtain, probe, and pump for cleaning
    9. AlphaSan antimicrobial protection in select components for a cleaner food zone
    10. R290 natural refrigerant with zero ozone depletion and extremely low global warming potential
    11. Optional LuminIce II growth inhibitor with a sanitation status icon on the display

    Specifications

    Ice Production (70°F Air / 50°F Water)970 lb per 24 hours
    Ice Production (90°F Air / 70°F Water)790 lb per 24 hours
    Ice ShapeDice (full cube)
    Cube Size7/8 in. x 7/8 in. x 7/8 in.
    Condenser TypeAir-cooled, self-contained
    Width30.00 in.
    Depth24.50 in.
    Height29.50 in. (machine head only)
    ExteriorStainless steel top, front, and side panels
    LouversStainless steel
    Exterior PlasticNone
    Security HardwareTamper-proof screws, special bits included
    Compatible Storage BinsManitowoc D400 (365 lb) or D570 (532 lb), sold separately
    RefrigerantR290, 15.9 oz charge
    Heat Rejection13,980 average, 16,030 peak BTU/hr
    Electrical208-230V/60/1 standard, 208-230V/60/3 available
    Minimum Circuit Ampacity10 amps (1 phase), 6.4 amps (3 phase)
    Maximum Fuse Size15 amps
    Energy Usage4.65 kWh per 100 lb of ice at 90°F/70°F
    Potable Water Usage13.9 gal per 100 lb of ice
    Ice Making Water Inlet3/8 in. FPT
    Ice Making Water Outlet1/2 in. FPT
    Bin Drain3/4 in.
    Water Pressure (Ice Maker)20 psi minimum, 80 psi maximum
    Ambient Temperature Range35°F to 110°F
    Water Temperature Range40°F to 90°F
    Clearance8 in. top and sides, 5 in. back
    Shipping Weight206 lbs

    Manufacturer's Warranty

      5 year

      Compressor

      5 year

      Evaporator

      3 year

      Labor

      3 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch