Manitowoc IDT0900W 780 lb Indigo NXT Modular Ice Machine Head, 30 in. Wide, Water-Cooled, Dice Cubes

The Manitowoc IDT0900W is the water-cooled build of the Indigo NXT 850-class head, made for hot equipment rooms and buildings already running a condenser water loop. It produces up to 780 lb of dice ice per 24 hours at 70°F air and 50°F water, and because heat leaves through the building water rather than the room air, it holds 665 lb at the 90°F rating point while drawing just 4.02 kWh per 100 lb of ice, the low energy figure of its family. The trade is a condenser loop that uses 135 gal of water per 100 lb of ice on top of 19 gal of potable water, so it belongs where water is inexpensive or a cooling loop already exists; the air-cooled IDT0900A skips that plumbing entirely. It is a head only, sized to D-570 or D-970 storage bins sold separately. Plan on 208-230V single phase service, separate 3/8 in. FPT ice-making and condenser inlets, a 1/2 in. condenser outlet and drains, and 8 in. of top and side clearance with 5 in. at the back.

Icon-Based Touch Screen with Programmable Ice Production

Every function runs through the icon-based easyTouch display, so whoever closes the kitchen can read operating status, start a cleaning mode, or check an alert without hunting for a manual; the interface offers 13 language options and keeps a date and time stamp with automatic reminder and alert icons. Programmable ice production is the money feature: schedule the machine off during peak electrical rates, cap it by daily production volume, or shift the work to night programming so the bin is full before the morning crew clocks in. One touch calls up asset information, and the controller automatically detects accessories as you add them, so upgrades register without a service visit.

Swing-Out Front Door with Removable Water-Path Components

Cleaning happens through a hinged front door that swings out of the way rather than a panel you unscrew and set aside. The water trough, distribution tube, curtain, water probe, water pump, and sensing components all remove from the food zone, so a deep clean is a fast, complete job instead of a reach-around compromise, and selected components are made with AlphaSan antimicrobial material that works between cleanings. An optional LuminIce II inhibitor controls viruses and bacteria inside the food zone, with status indication on the display. For routine care you can go hands-off entirely: the iAuCS accessory schedules and performs cleaning cycles automatically, Arctic Pure Plus water filters strip sediment and chlorine down to 0.5 microns ahead of the machine, and an external scoop holder keeps the scoop off the bin rim.

Acoustical Ice Sensing Probe with 24 Hour Intelligent Diagnostics

Manitowoc's patented acoustical ice sensing probe reads the harvest acoustically rather than by simple contact, which keeps cycles reliable in challenging water conditions that confuse conventional sensors. Active Sense software works in conjunction with that probe, adjusting so every harvest lands consistently as conditions drift across the day, anywhere in the machine's 40°F to 110°F ambient and 40°F to 90°F water operating limits. Intelligent diagnostics watch the machine around the clock and surface preventative maintenance and diagnostic feedback right on the display, so a service tech arrives already knowing what the machine has reported instead of starting the diagnosis from zero.

DuraTech Clear-Coat Exterior with Corrosion Resistance Beyond Stainless Steel

The cabinet wears Manitowoc's DuraTech exterior, a finish rated for corrosion resistance above stainless steel, with an innovative clear-coat that resists fingerprints and dirt so the machine stays presentable in an open sightline instead of polishing into your closing checklist. Unlike painted panels that chip at the corners, the clear-coated surface holds its look through years of cart traffic and scoop-in-hand contact. The refrigeration system runs R410A refrigerant, a CFC-free formulation that lowers global warming potential by 48 percent, and rejects 12 on a 208-230V connection with 8.8 amps of minimum circuit ampacity. Keep the listed clearance open and the self-contained system holds rated production without a remote condenser or added refrigerant lines.