Manitowoc LBCS1360 772 lb Large Bin Cart System Ice Storage Bin, 2 Ice Carts, 6 Totes, Guillotine Dispensing

The Manitowoc LBCS1360 is a large bin cart system, built for operations that produce ice at one central machine and move it in bulk to points of use instead of scooping at the bin. It stores 772 lb of ice by application rating, based on 90% of its verified 25 cu. ft. volume at 33 lb per cubic foot, and stainless steel guillotines drop that ice directly into two insulated polyethylene carts that hold roughly 207 lb each, so a crew wheels a loaded cart to the point of use rather than making bucket runs. Six lift-out totes ride on a spacer in each cart for hand-carried portions, and the first in, first out flow keeps the banked reserve rotating and fresher. If ice never leaves the machine room, a standard LB upright bin is the simpler format, and when 772 lb stops being enough, the separately sold K00512 sleeve adds 386 lb of capacity on the same footprint. Plan the install around a 60 in. wide by 36 in. deep cabinet standing 71 in. tall, a guillotine handle that adds 4.5 in. of depth but slides out for door entry, a separately ordered ice deflector for cuber heads, and a floor drain to serve the cart's rear drain pan.

Two Insulated Ice Carts and Six Totes for Bulk Transport

Each of the two included carts measures 36 in. high by 22.5 in. wide by 33.5 in. long, rolls out of its bay loaded, and holds about 207 lb of ice without the totes in place. The spacer elevates the six included totes, each sized at 13.5 in. high by 8.35 in. wide by 9 in. long with a 3.5 in. grab lip, so staff lift manageable portions instead of shoveling from a deep cart. A foot-operated drain lets meltwater run out of the cart into the rear drain pan and on to the floor drain whenever the cart is parked in the bay.

Stainless Steel Guillotines That Drop Ice Safely Into the Carts

Instead of an open door and a shovel, stainless steel guillotine gates dispense ice down into the insulated carts, a method Manitowoc describes as safe and sanitary because hands and tools never pass through the stored reserve. The guillotine handle adds 4.5 in. of depth once installed but can be slid out for easy door entry, and a 48 in. paddle ships with the system, hanging on one of the two external storage hooks beside the sanitary ice scoop with its thumb and knuckle guard.

Welded 304 Stainless Steel Exterior with Seamless Polyethylene Liner

The front and side exterior panels are welded 304 stainless steel for corrosion resistance in a permanently wet ice room, and the roto-molded polyethylene liner is seamless and rust free with two 1 in. ID drains to carry meltwater away. Bin walls are foamed with 1.5 in. of polyurethane insulation, so the reserve built overnight holds through the day, and the storage volume is verified to an industry measurement standard so the application rating rests on a measured standard.

Expandable Capacity with the K00512 Stainless Steel Sleeve

When daily draw grows past the base bin, the separately sold K00512 stainless steel sleeve sets on top and adds 386 lb of application capacity and 13 cu. ft. of volume while raising the height by 12 in. The system ships with adjustable flanged legs and a 1.5 in. to 3.5 in. ice machine adapter with filler panels that fit most single machine configurations; two-machine setups take a different adapter from the chart, and side-by-side machines must be water-cooled, remote, or top-air-discharge models.