Skip to content

Manitowoc UDE0065A 57 lb NEO Undercounter Ice Machine, 31 lb Bin Storage, Air-Cooled, Dice Cubes

SKUUDE0065A BrandManitowoc

The Manitowoc UDE0065A Undercounter Cube Ice Machine

The Manitowoc UDE0065A is the smaller of the two NEO 65/80 undercounter ice machines, built for small-volume operations that need their own ice supply without giving up floor space to a modular machine and bin. It produces up to 57 lb of dice ice per 24 hours at 70°F air and 50°F water, and the 31 lb insulated bin below the evaporator keeps a working reserve ready, so a bar or wait station can scoop through a full shift instead of running ice from the back of the house. It is right-sized for operations that scoop steadily rather than by the bucket; the sibling UDE0080A produces nearly double the daily ice from the same cabinet size, and a modular machine with a floor bin is the better format for high-volume beverage service. Plan on a standard 115V outlet, a 3/8 in. water line, and a drain; the flat right-angle plug and front-breathing airflow let it slide into tight spots a rear-vented cabinet cannot use.

Ice Maker and 31 lb Bin in One 19.69 In. Wide Cabinet

The cabinet measures 19.69 in. wide by 22.34 in. deep by 30 in. tall, and the legs adjust from 6.00 in. to 7.25 in. to level the machine and tuck it under a standard counter. Instead of coordinating a separate ice maker head and storage bin, you get both in one stainless steel cabinet with an easy-access door that slides up and out of the way, so a bartender can scoop one-handed in a narrow aisle. The dice cube measures 7/8 in. square, a shape that packs tight in glassware and melts slowly in beverage service.

Front Air Intake and Exhaust with No Minimum Clearance

Air comes in the left front and exits the right front, with no side vents, so the machine runs correctly even when it is boxed in by cabinetry or standing equipment on both sides. Manitowoc requires no minimum clearance on the top, sides, or back, though 5 in. is recommended where you can spare it. That is the difference between an undercounter machine you can actually install under a counter and one that needs breathing room the floor plan does not have.

Seamless Rotocast Bin Liner with AlphaSan Protection

The bin liner is one-piece rotocast polyethylene with no seams to trap meltwater or harbor buildup, surrounded by foamed-in-place CFC-free insulation that slows melt between pulls. AlphaSan antimicrobial protection is built into key internal components to extend the time between cleanings, and Manitowoc's patented cleaning and sanitizing technology shortens the routine when it is due. The proprietary vertical evaporator is the same design approach Manitowoc uses across its commercial line.

Slide-Out Air Filter and Up-Front Selector Switch

The reusable air filter slides out from the left front without tools, so whoever closes the kitchen can rinse it and keep the condenser clear of grease and lint rather than waiting for a service call. Ice, off, and clean operations run from a simple selector switch on the front of the machine; you never remove a panel for day-to-day operation. A 1/4 HP compressor and R-134A refrigerant system draw just 5.3 amps on a 115/60/1 circuit with a 6 ft cord and standard plug.

Features & Benefits

  1. Built for small-volume operations needing an ice maker and storage bin in one undercounter footprint
  2. Produces a full day of dice ice for light service with an insulated storage bin built in below
  3. Fits tight installs at 19.69 in. wide with front air intake and exhaust, no side vents
  4. Installs against walls and equipment with no minimum clearance required by the manufacturer
  5. Slide-out reusable air filter for longer operation in greasy, dusty environments without tools
  6. Up-front selector switch for ice, off, and clean modes without removing the front panel
  7. AlphaSan antimicrobial protection in key internal components to extend time between cleanings
  8. Seamless one-piece rotocast polyethylene bin liner for sanitary, easy-to-clean ice storage
  9. Durable stainless steel cabinet with easy-access door that slides up and out of the way
  10. Flat right-angle plug with a six-foot cord for easier hookups in tight spaces

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$2,319.42
  • Built for small-volume operations needing an ice maker and storage bin in one undercounter footprint
  • Produces a full day of dice ice for light service with an insulated storage bin built in below
  • Fits tight installs at 19.69 in. wide with front air intake and exhaust, no side vents
  • Installs against walls and equipment with no minimum clearance required by the manufacturer
  • Slide-out reusable air filter for longer operation in greasy, dusty environments without tools
  • See full feature list

    The Manitowoc UDE0065A Undercounter Cube Ice Machine

    The Manitowoc UDE0065A is the smaller of the two NEO 65/80 undercounter ice machines, built for small-volume operations that need their own ice supply without giving up floor space to a modular machine and bin. It produces up to 57 lb of dice ice per 24 hours at 70°F air and 50°F water, and the 31 lb insulated bin below the evaporator keeps a working reserve ready, so a bar or wait station can scoop through a full shift instead of running ice from the back of the house. It is right-sized for operations that scoop steadily rather than by the bucket; the sibling UDE0080A produces nearly double the daily ice from the same cabinet size, and a modular machine with a floor bin is the better format for high-volume beverage service. Plan on a standard 115V outlet, a 3/8 in. water line, and a drain; the flat right-angle plug and front-breathing airflow let it slide into tight spots a rear-vented cabinet cannot use.

    Ice Maker and 31 lb Bin in One 19.69 In. Wide Cabinet

    The cabinet measures 19.69 in. wide by 22.34 in. deep by 30 in. tall, and the legs adjust from 6.00 in. to 7.25 in. to level the machine and tuck it under a standard counter. Instead of coordinating a separate ice maker head and storage bin, you get both in one stainless steel cabinet with an easy-access door that slides up and out of the way, so a bartender can scoop one-handed in a narrow aisle. The dice cube measures 7/8 in. square, a shape that packs tight in glassware and melts slowly in beverage service.

    Front Air Intake and Exhaust with No Minimum Clearance

    Air comes in the left front and exits the right front, with no side vents, so the machine runs correctly even when it is boxed in by cabinetry or standing equipment on both sides. Manitowoc requires no minimum clearance on the top, sides, or back, though 5 in. is recommended where you can spare it. That is the difference between an undercounter machine you can actually install under a counter and one that needs breathing room the floor plan does not have.

    Seamless Rotocast Bin Liner with AlphaSan Protection

    The bin liner is one-piece rotocast polyethylene with no seams to trap meltwater or harbor buildup, surrounded by foamed-in-place CFC-free insulation that slows melt between pulls. AlphaSan antimicrobial protection is built into key internal components to extend the time between cleanings, and Manitowoc's patented cleaning and sanitizing technology shortens the routine when it is due. The proprietary vertical evaporator is the same design approach Manitowoc uses across its commercial line.

    Slide-Out Air Filter and Up-Front Selector Switch

    The reusable air filter slides out from the left front without tools, so whoever closes the kitchen can rinse it and keep the condenser clear of grease and lint rather than waiting for a service call. Ice, off, and clean operations run from a simple selector switch on the front of the machine; you never remove a panel for day-to-day operation. A 1/4 HP compressor and R-134A refrigerant system draw just 5.3 amps on a 115/60/1 circuit with a 6 ft cord and standard plug.

    Features & Benefits

    1. Built for small-volume operations needing an ice maker and storage bin in one undercounter footprint
    2. Produces a full day of dice ice for light service with an insulated storage bin built in below
    3. Fits tight installs at 19.69 in. wide with front air intake and exhaust, no side vents
    4. Installs against walls and equipment with no minimum clearance required by the manufacturer
    5. Slide-out reusable air filter for longer operation in greasy, dusty environments without tools
    6. Up-front selector switch for ice, off, and clean modes without removing the front panel
    7. AlphaSan antimicrobial protection in key internal components to extend time between cleanings
    8. Seamless one-piece rotocast polyethylene bin liner for sanitary, easy-to-clean ice storage
    9. Durable stainless steel cabinet with easy-access door that slides up and out of the way
    10. Flat right-angle plug with a six-foot cord for easier hookups in tight spaces

    Resources & Downloads

    Specifications

    Ice Production (70°F Air / 50°F Water)57 lb per 24 hours
    Ice Production (90°F Air / 70°F Water)46 lb per 24 hours
    Storage Bin Capacity31 lb
    Ice ShapeDice
    Cube Size7/8 in. x 7/8 in. x 7/8 in.
    Condenser TypeAir-cooled, self-contained
    Width19.69 in.
    Depth22.34 in.
    Cabinet Height30.00 in.
    LegsAdjustable, 6.00 in. to 7.25 in.
    Exterior FinishStainless steel
    Bin LinerOne-piece seamless rotocast polyethylene
    InsulationFoamed-in-place, CFC-free
    Compressor1/4 HP nominal
    RefrigerantR-134A, CFC-free
    Heat Rejection1,600 BTU/hr average, 2,350 BTU/hr peak
    Electrical115V, 60 Hz, 1 phase
    Total Ampacity5.3 amps
    Maximum Fuse Size15 amps (HACR-type breakers acceptable)
    Power Cord6 ft with flat right-angle NEMA 5-15P plug
    Energy Usage19.1 kWh per 100 lb of ice at 90°F/70°F
    Water Usage39.2 gal per 100 lb of ice at 90°F/70°F
    Water Inlet3/8 in. NPT
    Water Pressure34 psi minimum, 90 psi maximum
    Ambient Temperature Range50°F to 110°F
    Water Temperature Range50°F to 86°F
    AirflowFront intake (left), front exhaust (right), no side vents
    ClearanceNone required; 5 in. recommended at top, sides, and back
    EvaporatorProprietary vertical design, made in Manitowoc, WI

    Manufacturer's Warranty

    • 3 Year

      Labor

    • 3 Year

      Parts

    Certifications & Approvals

    • NFS
      NSF Approved
    • CE
      CE Listed

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Manitowoc UDE0065A Undercounter Cube Ice Machine

    Product Features

    1. Built for small-volume operations needing an ice maker and storage bin in one undercounter footprint
    2. Produces a full day of dice ice for light service with an insulated storage bin built in below
    3. Fits tight installs at 19.69 in. wide with front air intake and exhaust, no side vents
    4. Installs against walls and equipment with no minimum clearance required by the manufacturer
    5. Slide-out reusable air filter for longer operation in greasy, dusty environments without tools
    6. Up-front selector switch for ice, off, and clean modes without removing the front panel
    7. AlphaSan antimicrobial protection in key internal components to extend time between cleanings
    8. Seamless one-piece rotocast polyethylene bin liner for sanitary, easy-to-clean ice storage
    9. Durable stainless steel cabinet with easy-access door that slides up and out of the way
    10. Flat right-angle plug with a six-foot cord for easier hookups in tight spaces

    Specifications

    Ice Production (70°F Air / 50°F Water)57 lb per 24 hours
    Ice Production (90°F Air / 70°F Water)46 lb per 24 hours
    Storage Bin Capacity31 lb
    Ice ShapeDice
    Cube Size7/8 in. x 7/8 in. x 7/8 in.
    Condenser TypeAir-cooled, self-contained
    Width19.69 in.
    Depth22.34 in.
    Cabinet Height30.00 in.
    LegsAdjustable, 6.00 in. to 7.25 in.
    Exterior FinishStainless steel
    Bin LinerOne-piece seamless rotocast polyethylene
    InsulationFoamed-in-place, CFC-free
    Compressor1/4 HP nominal
    RefrigerantR-134A, CFC-free
    Heat Rejection1,600 BTU/hr average, 2,350 BTU/hr peak
    Electrical115V, 60 Hz, 1 phase
    Total Ampacity5.3 amps
    Maximum Fuse Size15 amps (HACR-type breakers acceptable)
    Power Cord6 ft with flat right-angle NEMA 5-15P plug
    Energy Usage19.1 kWh per 100 lb of ice at 90°F/70°F
    Water Usage39.2 gal per 100 lb of ice at 90°F/70°F
    Water Inlet3/8 in. NPT
    Water Pressure34 psi minimum, 90 psi maximum
    Ambient Temperature Range50°F to 110°F
    Water Temperature Range50°F to 86°F
    AirflowFront intake (left), front exhaust (right), no side vents
    ClearanceNone required; 5 in. recommended at top, sides, and back
    EvaporatorProprietary vertical design, made in Manitowoc, WI

    Manufacturer's Warranty

      3 year

      Labor

      3 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch