Manitowoc UFK0200AZ 229 lb Flake Ice Machine with 66 lb Storage Bin, Air-Cooled, 220-240V 50 Hz

The Manitowoc UFK0200AZ is the 220-240V 50 Hz model of Manitowoc's narrow flake ice machine with bin, built for facilities running 50 Hz single-phase electrical service where a standard 60 Hz machine cannot be wired in. It produces up to 229 lb of flake ice per 24 hours at 50°F air and 45°F water, makes 209 lb at 70°F air and 60°F water, and stores up to 66 lb in the bin below, keeping food displays, salad bars, and cold therapy coolers supplied from a cabinet under 20 in. wide. Flake is presentation and therapy ice rather than beverage ice, so beverage-led operations should look at a nugget machine instead, and buildings on standard North American 115V 60 Hz service should specify the UFP0200A, which is wired for that supply. The machine ships factory pre-wired with a 6 ft cord and no plug for connection to a 220-240/50/1 circuit; plan a 3/8 in. water line, a drain, 2 in. of side clearance, and 8 in. at the back.

Flake Ice Maker and 66 lb Storage Bin in One 19.69 In. Wide Cabinet

The cabinet measures 19.69 in. wide by 25.98 in. deep by 37.50 in. tall on 6 in. bin legs that adjust from 4.50 in. to 6.00 in., with alternate low-profile non-adjustable legs included for installs where every fraction of height counts. Ice maker and bin share one housing, which spares you the job of matching a separate head to a separate bin and keeps the whole installation under 20 in. of line space. The easy-access door slides up and out of the way, so staff can work the included ice scoop with one hand while the other steadies a pan. Shipping weight is 168 lb, so have a second set of hands for the uncrating.

Small Hard Flake Ice for Food Display, Salad Bars, and Cold Therapy

Flake ice is small hard bits of ice ideally suited to presentation applications, and Manitowoc points this machine squarely at food display, salad bars, and cold therapy and healthcare work. A supply that lives at the point of use means the produce case gets fresh flake at open and the therapy room refills between sessions without anyone leaving the station. The bin holds up to 66 lb of flake below the ice maker, and the machine rebuilds the reserve continuously as staff scoop it down.

High-Load Bearings in a Heavy Duty Stainless Steel Cabinet

Flake machines run long duty cycles, so Manitowoc fits high-load low-maintenance bearings for enhanced reliability rather than bearings that go on a frequent service schedule. The heavy duty stainless steel cabinet resists corrosion, which matters when the machine spends its life next to iced product and daily washdowns. Average energy use is 4.99 kWh per 100 lb of ice at the 90°F air and 70°F water rating point, with 12 gal of potable water consumed per 100 lb of ice made.

220-240V 50 Hz Single-Phase Electrics with R452A Refrigerant

The machine is factory pre-wired for 220-240V 50 Hz single-phase service with a 6 ft cord and no plug, draws an average of 470 watts, and takes a 10 amp maximum fuse, with HACR-type circuit breakers acceptable in place of fuses. The refrigeration system runs R452A refrigerant through an air-cooled, self-contained condenser with an average heat of rejection of 2,400 BTU/hr. Operating limits span 50°F to 110°F ambient and 37°F to 90°F incoming water at 14 psi to 84 psi supply pressure, so the machine holds spec in warm prep areas as well as conditioned space.