The Manitowoc UNK0200AZ Nugget Ice Machine
The Manitowoc UNK0200AZ is the kitchen-counter-height model of the UNK nugget ice pair, the 230V 50 Hz version of Manitowoc's undercounter nugget machines for facilities where standard 60 Hz equipment cannot be wired in. It produces up to 145 lb of bite-size nugget ice per 24 hours at 70°F air and 50°F water and stores 30 lb in the bin below, and its 88 percent ice-to-water ratio, one of the industry's best for nugget ice, maximizes cooling capability while minimizing drink dilution in carbonated beverages and blended smoothies. Manitowoc also aims it at healthcare and physical therapy, where the soft chewable texture earns its keep. If you need bar-height installation or more daily volume on 50 Hz service, the taller UNK0300AZ makes up to 302 lb per day with a 60 lb bin, and buildings on standard North American 115V 60 Hz service should specify the UNP0200A, which is wired for that supply. The machine ships factory pre-wired with a 6 ft cord and no plug for connection to a 230/50/1 circuit; plan a 3/8 in. water line, a drain, 2 in. of side clearance, and 8 in. at the back.
Nugget Ice Maker and 30 lb Storage Bin in One 19.69 In. Wide Cabinet
The cabinet measures 19.69 in. wide by 25.98 in. deep by 33.17 in. tall on 6 in. bin legs that adjust from 4.50 in. to 6.00 in., a height Manitowoc sizes specifically for undercounter installation at kitchen counters, with alternate low-profile non-adjustable legs included for installs where every fraction counts. Ice maker and bin share one housing, so there is no head-and-bin matching exercise, and the bin carries a 20 lb rating under the 2017 AHRI measurement with 1.03 cu ft of volume under the 2018 AHRI standard. The easy-access door slides up and out of the way, so staff can work the included ice scoop one-handed between tickets.
Bite-Size Nugget Ice with an 88 Percent Ice-to-Water Ratio
Nugget ice consists of small pieces ranging from 3/8 in. to 1/2 in. in width and length on average, with a soft, chewable texture that still delivers maximum cooling effect and great dispensability. The 88 percent ice-to-water ratio is the number that matters at the register: more ice and less free water in every scoop means drinks chill fast without watering down. That combination is why nugget machines end up behind soda stations, smoothie bars, and nurse stations alike.
High-Load Bearings in a Heavy Duty Stainless Steel Cabinet
Nugget machines run long duty cycles, so Manitowoc fits high-load capacity bearings for enhanced reliability rather than bearings that go on a frequent service schedule. The heavy duty stainless steel cabinet resists corrosion, which matters when the machine spends its life at a wet beverage station with daily washdowns. Energy use is 7.82 kWh and 12 gal of potable water per 100 lb of ice at the 90°F air and 70°F water rating point.
230V 50 Hz Single-Phase Electrics with R452A Refrigerant
The machine is factory pre-wired for 230V 50 Hz single-phase service with a 6 ft cord and no plug, draws 10 amps of total ampacity, and takes a 15 amp maximum fuse, with HACR-type circuit breakers acceptable in place of fuses. The refrigeration system pairs a 1/4 HP compressor and R452A refrigerant with an air-cooled, self-contained condenser rejecting an average of 2,400 BTU/hr. Operating limits span 50°F to 110°F ambient and 37°F to 90°F incoming water at 14 psi to 80 psi supply pressure, so the machine holds spec in warm prep areas as well as conditioned space.
About Manitowoc
Manitowoc Ice has a long history of developing commercial ice equipment for restaurants, hotels, healthcare facilities, and other high-volume operations. Its product range includes modular ice machines, undercounter units, dispensers, and storage bins designed around different production demands and installation needs. Manitowoc emphasizes consistent ice production, sanitation, energy efficiency, and easier maintenance. Practical features help simplify cleaning, monitoring, and everyday operation while addressing water and energy consumption. With equipment engineered for the realities of busy foodservice environments, Manitowoc has become a widely recognized manufacturer of commercial ice machines and related ice-making equipment.
Features & Benefits
-
Built for soda stations, smoothie bars, and healthcare or physical therapy on 50 Hz single-phase service
-
Bite-size nugget that boasts one of the industry's best ice-to-water ratios for nugget ice
-
Maximizes cooling capability while minimizing drink dilution in carbonated beverages and smoothies
-
Sized for undercounter installation at kitchen counters with a compact cabinet height
-
High-load capacity bearings for enhanced reliability through long daily duty cycles
-
Heavy duty stainless steel cabinet that resists corrosion in wet service areas
-
Easy-access door design that slides up and out of the way for one-handed scooping
-
R452A refrigerant system with an air-cooled, self-contained condenser
-
Factory pre-wired cord for direct connection to 50 Hz single-phase supplies
-
Included ice scoop and alternate low-profile legs for flexible installation
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Manitowoc UNK0200AZ Nugget Ice Machine
The Manitowoc UNK0200AZ is the kitchen-counter-height model of the UNK nugget ice pair, the 230V 50 Hz version of Manitowoc's undercounter nugget machines for facilities where standard 60 Hz equipment cannot be wired in. It produces up to 145 lb of bite-size nugget ice per 24 hours at 70°F air and 50°F water and stores 30 lb in the bin below, and its 88 percent ice-to-water ratio, one of the industry's best for nugget ice, maximizes cooling capability while minimizing drink dilution in carbonated beverages and blended smoothies. Manitowoc also aims it at healthcare and physical therapy, where the soft chewable texture earns its keep. If you need bar-height installation or more daily volume on 50 Hz service, the taller UNK0300AZ makes up to 302 lb per day with a 60 lb bin, and buildings on standard North American 115V 60 Hz service should specify the UNP0200A, which is wired for that supply. The machine ships factory pre-wired with a 6 ft cord and no plug for connection to a 230/50/1 circuit; plan a 3/8 in. water line, a drain, 2 in. of side clearance, and 8 in. at the back.
Nugget Ice Maker and 30 lb Storage Bin in One 19.69 In. Wide Cabinet
The cabinet measures 19.69 in. wide by 25.98 in. deep by 33.17 in. tall on 6 in. bin legs that adjust from 4.50 in. to 6.00 in., a height Manitowoc sizes specifically for undercounter installation at kitchen counters, with alternate low-profile non-adjustable legs included for installs where every fraction counts. Ice maker and bin share one housing, so there is no head-and-bin matching exercise, and the bin carries a 20 lb rating under the 2017 AHRI measurement with 1.03 cu ft of volume under the 2018 AHRI standard. The easy-access door slides up and out of the way, so staff can work the included ice scoop one-handed between tickets.
Bite-Size Nugget Ice with an 88 Percent Ice-to-Water Ratio
Nugget ice consists of small pieces ranging from 3/8 in. to 1/2 in. in width and length on average, with a soft, chewable texture that still delivers maximum cooling effect and great dispensability. The 88 percent ice-to-water ratio is the number that matters at the register: more ice and less free water in every scoop means drinks chill fast without watering down. That combination is why nugget machines end up behind soda stations, smoothie bars, and nurse stations alike.
High-Load Bearings in a Heavy Duty Stainless Steel Cabinet
Nugget machines run long duty cycles, so Manitowoc fits high-load capacity bearings for enhanced reliability rather than bearings that go on a frequent service schedule. The heavy duty stainless steel cabinet resists corrosion, which matters when the machine spends its life at a wet beverage station with daily washdowns. Energy use is 7.82 kWh and 12 gal of potable water per 100 lb of ice at the 90°F air and 70°F water rating point.
230V 50 Hz Single-Phase Electrics with R452A Refrigerant
The machine is factory pre-wired for 230V 50 Hz single-phase service with a 6 ft cord and no plug, draws 10 amps of total ampacity, and takes a 15 amp maximum fuse, with HACR-type circuit breakers acceptable in place of fuses. The refrigeration system pairs a 1/4 HP compressor and R452A refrigerant with an air-cooled, self-contained condenser rejecting an average of 2,400 BTU/hr. Operating limits span 50°F to 110°F ambient and 37°F to 90°F incoming water at 14 psi to 80 psi supply pressure, so the machine holds spec in warm prep areas as well as conditioned space.
About Manitowoc
Manitowoc Ice has a long history of developing commercial ice equipment for restaurants, hotels, healthcare facilities, and other high-volume operations. Its product range includes modular ice machines, undercounter units, dispensers, and storage bins designed around different production demands and installation needs. Manitowoc emphasizes consistent ice production, sanitation, energy efficiency, and easier maintenance. Practical features help simplify cleaning, monitoring, and everyday operation while addressing water and energy consumption. With equipment engineered for the realities of busy foodservice environments, Manitowoc has become a widely recognized manufacturer of commercial ice machines and related ice-making equipment.
Features & Benefits
-
Built for soda stations, smoothie bars, and healthcare or physical therapy on 50 Hz single-phase service
-
Bite-size nugget that boasts one of the industry's best ice-to-water ratios for nugget ice
-
Maximizes cooling capability while minimizing drink dilution in carbonated beverages and smoothies
-
Sized for undercounter installation at kitchen counters with a compact cabinet height
-
High-load capacity bearings for enhanced reliability through long daily duty cycles
-
Heavy duty stainless steel cabinet that resists corrosion in wet service areas
-
Easy-access door design that slides up and out of the way for one-handed scooping
-
R452A refrigerant system with an air-cooled, self-contained condenser
-
Factory pre-wired cord for direct connection to 50 Hz single-phase supplies
-
Included ice scoop and alternate low-profile legs for flexible installation
Resources & Downloads
See all from Manitowoc
Specifications
| Ice Production (70°F Air / 50°F Water) | 145 lb per 24 hours |
| Ice Production (90°F Air / 70°F Water) | 117 lb per 24 hours |
| Bin Storage Capacity | 30 lb |
| 2017 AHRI Capacity | 20 lb |
| 2018 AHRI Bin Volume | 1.03 cu ft |
| Ice Shape | Bite-size nugget |
| Nugget Size | 3/8 in. to 1/2 in. width and length, average |
| Ice-to-Water Ratio | 88% |
| Condenser Type | Air-cooled, self-contained |
| Width | 19.69 in. |
| Depth | 25.98 in. |
| Height | 33.17 in. with legs set at 6.00 in. |
| Legs | 6 in. bin legs, adjustable 4.50 in. to 6.00 in. |
| Alternate Legs | Low-profile, non-adjustable, 1/4 in. |
| Exterior Finish | Heavy duty stainless steel |
| Compressor | 1/4 HP nominal |
| Refrigerant | R452A |
| Condenser Heat of Rejection | 2,400 BTU/hr average |
| Electrical | 230V, 50 Hz, 1 phase |
| Total Ampacity | 10 amps |
| Maximum Fuse Size | 15 amps, HACR-type breakers acceptable |
| Power Cord | 6 ft, no plug |
| Energy Usage | 7.82 kWh per 100 lb of ice at 90°F/70°F |
| Water Usage | 12 gal per 100 lb of ice |
| Water Inlet | 3/8 in. NPT |
| Water Outlet | 1/2 in. NPT |
| Water Pressure | 14 psi minimum, 80 psi maximum |
| Ambient Temperature Range | 50°F to 110°F |
| Water Temperature Range | 37°F to 90°F |
| Airflow | Front intake, rear discharge, no side vents |
| Clearance | 2 in. sides, 8 in. back |
| Included Accessories | Ice scoop |
Manufacturer's Warranty
-
5 Year
Compressor
-
3 Year
Labor
-
3 Year
Parts
Certifications & Approvals
-
CE Listed
-
ETL US & Canada
-
ETL Sanitation

