The Mecnosud PK44DUS Spiral Dough Mixer
The Mecnosud PK44DUS is a two-speed spiral dough mixer with a fixed stainless steel bowl and a fixed head, sized for pizza shops, bakeries, and restaurant prep lines that need up to 97 lb (44 kg) of dough per batch at 55 percent hydration. One bowl gives you roughly 170 pizza dough balls at 9 oz each, or the bread and focaccia for a bakery that bakes through the morning, in a 33.46" wide footprint. It is not a wholesale machine that turns out several hundred pounds an hour, and because the bowl stays on the frame you scoop or tip the finished dough out at the mixer instead of carrying a bowl to the bench. The unit runs on 220 V three-phase 60 Hz, ships wired with no plug for your electrician to hardwire, and sits on casters with brakes so you can roll it out to mop and lock it down again before the next batch.
Two Speeds for Flour Pickup and Gluten Development
First speed turns the spiral at 120 rpm with the bowl at 15 rpm; second speed doubles both to 240 and 30 rpm, so the ratio between hook and bowl never changes. Start in first while the water soaks into 66 lb of flour and the mass is still ragged, then move to second once it pulls together and you want gluten. Where a planetary mixer drags a hook through dough from one side, the rotating bowl here keeps feeding the dough into the spiral from all around, so a stiff pizza dough kneads evenly instead of climbing the hook or riding up the wall. Two fixed speeds and no menu also mean a prep cook who rotates onto the station is running it the same way the baker does.
Stainless Steel Bowl, Spiral, and Shaft
The bowl holds 55 qt (50 L, 13.2 gal), measures 19.68" (50 cm) across and 10.6" (27 cm) deep, and takes 66 lb (30 kg) of flour per batch, which is where the 97 lb dough rating at 55 percent hydration comes from. A wetter ciabatta or high-hydration pan dough takes up more room in the bowl, so batch those smaller than a pizza dough. Bowl, spiral, and the shaft that turns it are all stainless steel: the dough-contact surfaces wipe down with a damp cloth when you switch from a sweet brioche to a savory bread, and salt or an acidic preferment will not pit them.
Geared Motor With Double-Chain Drive
A 3 HP geared motor drives both the spiral and the bowl through a double-chain system. A chain cannot slip the way a belt does, so when a low-hydration bagel dough stiffens halfway through the knead the spiral keeps its speed and the gearbox, not the motor, takes the torque. The motor draws 6.7 A at 220 V three-phase 60 Hz, which calls for a dedicated three-phase circuit; there is no cord-and-plug option, the mixer arrives wired with no plug.
Mechanical Panel With Timer and Emergency Stop
The control panel on the head is mechanical: two selector switches, a timer dial, a green start button, and a red emergency stop. No touchscreen, no stored recipes, which suits a pizzeria that makes the same dough every day and does not want a menu between the cook and the start button. Dial in the knead time, press start, and portion the last batch while this one runs and shuts itself off. The red stop button is big enough to hit with a floury palm, and a new hire can be shown the whole panel in a few minutes.
Stainless Steel Guard and Painted Steel Frame on Braked Casters
A stainless steel wire guard sits over the bowl while the spiral turns, so hands stay out but you can still watch the dough come together. Under it, the frame is thick steel finished in a non-toxic paint rather than a stainless skin, and that mass is what keeps the machine planted when 97 lb of dough loads up at second speed. The casters have brakes: release them to pull the mixer away from the wall for cleaning, set them before the next batch so it does not creep across the floor.
About Mecnosud
Mecnosud is an Italian manufacturer with over four decades of expertise in dough-processing machinery tailored for artisan bakeries, pizzerias, and pastry operations. The brand emphasizes engineering precision and stainless-steel reliability, offering spiral and fork mixers, sheeters, dividers, dough rollers, and proofing equipment built entirely in Italy. Its product line supports full-scale dough preparation, from mixing to forming, delivering consistent performance across varied production environments. Mecnosud’s support network and industrial craftsmanship have earned global respect among institutions and chain-scale operations worldwide}.
Features & Benefits
-
Pizza, bread, and focaccia dough production for pizza shops, bakeries, and restaurant prep lines
-
Two spiral speeds, 120 rpm for flour pickup and 240 rpm for gluten development
-
Bowl turning at 15 and 30 rpm so dough feeds into the spiral from every side
-
Stainless steel bowl, spiral, and shaft that wipe down between sweet and savory doughs
-
Geared motor with a double-chain drive that keeps spiral speed steady in a stiff dough
-
Mechanical control panel with two selector switches, a dial timer, and a red emergency stop
-
Dial timer that shuts the mixer off on its own while you portion the previous batch
-
Stainless steel wire guard over the bowl that keeps hands clear of the spiral
-
Thick steel frame finished in non-toxic paint that stays planted at second speed
-
Casters with brakes so the mixer rolls out for mopping and locks in place for mixing
-
Three-phase motor delivered wired without a plug for a dedicated hardwired circuit
-
Capacity rated at 55 percent hydration, so high-hydration doughs should be batched smaller
-
Fixed bowl and fixed head with no lift mechanism to adjust or service
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Mecnosud PK44DUS Spiral Dough Mixer
The Mecnosud PK44DUS is a two-speed spiral dough mixer with a fixed stainless steel bowl and a fixed head, sized for pizza shops, bakeries, and restaurant prep lines that need up to 97 lb (44 kg) of dough per batch at 55 percent hydration. One bowl gives you roughly 170 pizza dough balls at 9 oz each, or the bread and focaccia for a bakery that bakes through the morning, in a 33.46" wide footprint. It is not a wholesale machine that turns out several hundred pounds an hour, and because the bowl stays on the frame you scoop or tip the finished dough out at the mixer instead of carrying a bowl to the bench. The unit runs on 220 V three-phase 60 Hz, ships wired with no plug for your electrician to hardwire, and sits on casters with brakes so you can roll it out to mop and lock it down again before the next batch.
Two Speeds for Flour Pickup and Gluten Development
First speed turns the spiral at 120 rpm with the bowl at 15 rpm; second speed doubles both to 240 and 30 rpm, so the ratio between hook and bowl never changes. Start in first while the water soaks into 66 lb of flour and the mass is still ragged, then move to second once it pulls together and you want gluten. Where a planetary mixer drags a hook through dough from one side, the rotating bowl here keeps feeding the dough into the spiral from all around, so a stiff pizza dough kneads evenly instead of climbing the hook or riding up the wall. Two fixed speeds and no menu also mean a prep cook who rotates onto the station is running it the same way the baker does.
Stainless Steel Bowl, Spiral, and Shaft
The bowl holds 55 qt (50 L, 13.2 gal), measures 19.68" (50 cm) across and 10.6" (27 cm) deep, and takes 66 lb (30 kg) of flour per batch, which is where the 97 lb dough rating at 55 percent hydration comes from. A wetter ciabatta or high-hydration pan dough takes up more room in the bowl, so batch those smaller than a pizza dough. Bowl, spiral, and the shaft that turns it are all stainless steel: the dough-contact surfaces wipe down with a damp cloth when you switch from a sweet brioche to a savory bread, and salt or an acidic preferment will not pit them.
Geared Motor With Double-Chain Drive
A 3 HP geared motor drives both the spiral and the bowl through a double-chain system. A chain cannot slip the way a belt does, so when a low-hydration bagel dough stiffens halfway through the knead the spiral keeps its speed and the gearbox, not the motor, takes the torque. The motor draws 6.7 A at 220 V three-phase 60 Hz, which calls for a dedicated three-phase circuit; there is no cord-and-plug option, the mixer arrives wired with no plug.
Mechanical Panel With Timer and Emergency Stop
The control panel on the head is mechanical: two selector switches, a timer dial, a green start button, and a red emergency stop. No touchscreen, no stored recipes, which suits a pizzeria that makes the same dough every day and does not want a menu between the cook and the start button. Dial in the knead time, press start, and portion the last batch while this one runs and shuts itself off. The red stop button is big enough to hit with a floury palm, and a new hire can be shown the whole panel in a few minutes.
Stainless Steel Guard and Painted Steel Frame on Braked Casters
A stainless steel wire guard sits over the bowl while the spiral turns, so hands stay out but you can still watch the dough come together. Under it, the frame is thick steel finished in a non-toxic paint rather than a stainless skin, and that mass is what keeps the machine planted when 97 lb of dough loads up at second speed. The casters have brakes: release them to pull the mixer away from the wall for cleaning, set them before the next batch so it does not creep across the floor.
About Mecnosud
Mecnosud is an Italian manufacturer with over four decades of expertise in dough-processing machinery tailored for artisan bakeries, pizzerias, and pastry operations. The brand emphasizes engineering precision and stainless-steel reliability, offering spiral and fork mixers, sheeters, dividers, dough rollers, and proofing equipment built entirely in Italy. Its product line supports full-scale dough preparation, from mixing to forming, delivering consistent performance across varied production environments. Mecnosud’s support network and industrial craftsmanship have earned global respect among institutions and chain-scale operations worldwide}.
Features & Benefits
-
Pizza, bread, and focaccia dough production for pizza shops, bakeries, and restaurant prep lines
-
Two spiral speeds, 120 rpm for flour pickup and 240 rpm for gluten development
-
Bowl turning at 15 and 30 rpm so dough feeds into the spiral from every side
-
Stainless steel bowl, spiral, and shaft that wipe down between sweet and savory doughs
-
Geared motor with a double-chain drive that keeps spiral speed steady in a stiff dough
-
Mechanical control panel with two selector switches, a dial timer, and a red emergency stop
-
Dial timer that shuts the mixer off on its own while you portion the previous batch
-
Stainless steel wire guard over the bowl that keeps hands clear of the spiral
-
Thick steel frame finished in non-toxic paint that stays planted at second speed
-
Casters with brakes so the mixer rolls out for mopping and locks in place for mixing
-
Three-phase motor delivered wired without a plug for a dedicated hardwired circuit
-
Capacity rated at 55 percent hydration, so high-hydration doughs should be batched smaller
-
Fixed bowl and fixed head with no lift mechanism to adjust or service
Resources & Downloads
See all from Mecnosud
Specifications
| Dough Capacity | 97 lb (44 kg) |
| Flour Capacity | 66 lb (30 kg) |
| Capacity Basis | 55% hydration |
| Bowl Volume | 55 qt (50 L, 13.2 gal) |
| Bowl Material | Stainless steel |
| Bowl Type | Fixed |
| Head | Fixed |
| Bowl Internal Diameter | 19.68" (50 cm) |
| Bowl Internal Height | 10.6" (27 cm) |
| Spiral Material | Stainless steel |
| Shaft Material | Stainless steel |
| Speeds | 2 |
| Spiral RPM | 120 / 240 |
| Bowl RPM | 15 / 30 |
| Drive System | Geared motor, double-chain drive |
| Motor Power | 3 HP |
| Voltage / Phase / Hz | 220 V / 3 Ph / 60 Hz |
| Amperage | 6.7 A |
| Plug | Wired, no plug |
| Controls | Mechanical, selectors, start, emergency stop |
| Timer | Included |
| Safety Guard | Stainless steel wire guard |
| Frame Construction | Thick steel, non-toxic paint |
| Casters | Included, with brakes |
| Overall Dimensions W x D x H | 33.46" x 20.86" x 30.31" (85 x 53 x 77 cm) |
| Shipping Weight | 281 lb (127.5 kg) |
| Country of Origin | Italy |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
NSF Approved
-
ETL US & Canada
-
ETL Sanitation
-
Made in Italy

