The Moretti Forni IM38/2 Spiral Dough Mixer
The Moretti Forni IM38/2 is a two-speed spiral dough mixer with a fixed head and fixed stainless steel bowl, built for pizzerias, bakeries, and restaurant prep lines that mix dough in batches of up to 84 lb (38 kg). That is roughly 150 pizza dough balls at 9 oz each, or a morning's worth of bread and focaccia for a small bakery, in a cabinet only 17 23/32" wide. It is not sized for a wholesale bakery turning over several hundred pounds an hour, and the bowl stays on the machine, so you scoop or tip dough out rather than wheeling a bowl away. It runs on 208 V three-phase, 60 Hz, stands 29 15/16" tall with the grille closed, and sits on rotating wheels so you can roll it to the bench and back.
Spiral and Bowl Rotate Together for Even Dough
The spiral hook and the bowl both turn, so the dough is pulled through the hook from every angle instead of riding the bowl wall. Moretti's spiral profile keeps the dough moving without working it hot: the sheet calls out a low, constant temperature from the start of the cycle to the end. Compared with a planetary mixer running a dough hook, you get a tighter, more oxygenated dough with less friction heat, which matters when you are building a 65 percent hydration pizza dough that still has to ferment overnight.
Stainless Steel Bowl, Spiral, and Dough Breaker
The bowl, spiral, dough breaker, and safety grille are all stainless steel. The dough breaker is the fixed post in the bowl that holds the mass against the spiral so the hook actually kneads it rather than spinning it around. The bowl is 17 23/32" (450 mm) across and 10 1/4" (260 mm) deep, with a 10.57 gal (40 L) volume. Stainless on every dough-contact surface means a wipe-down with a damp cloth between pizza dough and sweet dough, not a scrub.
Chain Drive on an Oil-Bath Gear Motor
Power goes from the motor through an oil-bath gear reducer and a chain drive to the spiral, with the rotating transmission parts riding on sealed, self-lubricating ball bearings. Chain drive holds its ratio under load, so the spiral does not slow down when a stiff bagel dough comes together the way a belt can slip. The oil bath keeps the gears quiet and takes lubrication off your maintenance list. The two-speed motor draws 2.2 kW at 208 V three-phase, 60 Hz, with a maximum of 9.0 A.
Push-Button Panel with Timer
Controls are a push-button panel on the right side of the head, where you can reach it while adding flour. Two speeds let you run the slow speed to take up flour and water without dusting the room, then switch to the fast speed to build gluten; the sheet notes the two-speed machine is available only on three-phase power. Set the timer, start the cycle, and move to portioning while the mixer finishes on its own.
Safety Grille and Low-Voltage Controls
The stainless steel grille over the bowl has a safety device that stops the spiral when the grille is lifted, so nobody reaches into a turning hook. The control circuit runs on a low-voltage auxiliary line, which keeps mains voltage away from the buttons you touch with wet hands. The frame is thick powder-painted stainless steel designed to hold the machine steady through every phase of the knead instead of walking across the floor.
Compact Footprint on Rotating Wheels
At 17 23/32" wide, 31 11/16" deep, and 29 15/16" tall, the IM38/2 fits under most wall shelves and beside a prep table. The rotating wheels let one person move the 247 lb mixer to a mop-out or into a corner at close. Lifting the grille adds height to 38 31/32", so check clearance under overhead shelving where you plan to park it. The unit ships with a 59" (1500 mm) power cable already attached.
About Moretti Forni
Established in 1946, Moretti Forni is known in professional kitchens for high-precision ovens designed for pizzerias, bakeries and institutions. Their engineering emphasizes consistent thermal performance and reliable build quality. The brand’s flagship deck and conveyor ovens incorporate features such as AdaptivePower® energy-management, digital controls and modular baking chambers tailored for trays, Roman-style pizza and long-rise breads. Moretti Forni maintains service support and training through its “MorettiLAB” academy and global partner network, making it a trusted choice for chains and large-scale foodservice operations..
Features & Benefits
-
Pizza, bread, and pastry dough mixing for pizzerias, bakeries, and restaurant prep lines
-
Combined spiral and bowl rotation that kneads the full batch evenly and oxygenates the dough
-
Spiral profile that keeps dough temperature low and steady through the whole cycle
-
Two mixing speeds: slow for incorporating flour and water, fast for developing gluten
-
Three-phase motor that keeps torque up on stiff, low-hydration doughs
-
Built-in timer so you set the cycle and move to the next task
-
Stainless steel spiral, bowl, dough breaker, and safety grille that wipe down between batches
-
Dough breaker that holds the mass against the spiral instead of letting it ride the bowl wall
-
Chain drive on an oil-bath gear motor for quiet, maintenance-free transmission
-
Rotating transmission parts on sealed self-lubricating ball bearings
-
Thick powder-painted stainless steel frame that resists vibration under full load
-
Safety switch on the grille that stops the spiral when the guard is lifted
-
Control buttons on a separate auxiliary circuit that keeps mains power away from the panel
-
Rotating wheels for rolling the mixer into position in tight prep areas
-
Fixed head and fixed bowl with no lift mechanism to adjust or maintain
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Moretti Forni IM38/2 Spiral Dough Mixer
The Moretti Forni IM38/2 is a two-speed spiral dough mixer with a fixed head and fixed stainless steel bowl, built for pizzerias, bakeries, and restaurant prep lines that mix dough in batches of up to 84 lb (38 kg). That is roughly 150 pizza dough balls at 9 oz each, or a morning's worth of bread and focaccia for a small bakery, in a cabinet only 17 23/32" wide. It is not sized for a wholesale bakery turning over several hundred pounds an hour, and the bowl stays on the machine, so you scoop or tip dough out rather than wheeling a bowl away. It runs on 208 V three-phase, 60 Hz, stands 29 15/16" tall with the grille closed, and sits on rotating wheels so you can roll it to the bench and back.
Spiral and Bowl Rotate Together for Even Dough
The spiral hook and the bowl both turn, so the dough is pulled through the hook from every angle instead of riding the bowl wall. Moretti's spiral profile keeps the dough moving without working it hot: the sheet calls out a low, constant temperature from the start of the cycle to the end. Compared with a planetary mixer running a dough hook, you get a tighter, more oxygenated dough with less friction heat, which matters when you are building a 65 percent hydration pizza dough that still has to ferment overnight.
Stainless Steel Bowl, Spiral, and Dough Breaker
The bowl, spiral, dough breaker, and safety grille are all stainless steel. The dough breaker is the fixed post in the bowl that holds the mass against the spiral so the hook actually kneads it rather than spinning it around. The bowl is 17 23/32" (450 mm) across and 10 1/4" (260 mm) deep, with a 10.57 gal (40 L) volume. Stainless on every dough-contact surface means a wipe-down with a damp cloth between pizza dough and sweet dough, not a scrub.
Chain Drive on an Oil-Bath Gear Motor
Power goes from the motor through an oil-bath gear reducer and a chain drive to the spiral, with the rotating transmission parts riding on sealed, self-lubricating ball bearings. Chain drive holds its ratio under load, so the spiral does not slow down when a stiff bagel dough comes together the way a belt can slip. The oil bath keeps the gears quiet and takes lubrication off your maintenance list. The two-speed motor draws 2.2 kW at 208 V three-phase, 60 Hz, with a maximum of 9.0 A.
Push-Button Panel with Timer
Controls are a push-button panel on the right side of the head, where you can reach it while adding flour. Two speeds let you run the slow speed to take up flour and water without dusting the room, then switch to the fast speed to build gluten; the sheet notes the two-speed machine is available only on three-phase power. Set the timer, start the cycle, and move to portioning while the mixer finishes on its own.
Safety Grille and Low-Voltage Controls
The stainless steel grille over the bowl has a safety device that stops the spiral when the grille is lifted, so nobody reaches into a turning hook. The control circuit runs on a low-voltage auxiliary line, which keeps mains voltage away from the buttons you touch with wet hands. The frame is thick powder-painted stainless steel designed to hold the machine steady through every phase of the knead instead of walking across the floor.
Compact Footprint on Rotating Wheels
At 17 23/32" wide, 31 11/16" deep, and 29 15/16" tall, the IM38/2 fits under most wall shelves and beside a prep table. The rotating wheels let one person move the 247 lb mixer to a mop-out or into a corner at close. Lifting the grille adds height to 38 31/32", so check clearance under overhead shelving where you plan to park it. The unit ships with a 59" (1500 mm) power cable already attached.
About Moretti Forni
Established in 1946, Moretti Forni is known in professional kitchens for high-precision ovens designed for pizzerias, bakeries and institutions. Their engineering emphasizes consistent thermal performance and reliable build quality. The brand’s flagship deck and conveyor ovens incorporate features such as AdaptivePower® energy-management, digital controls and modular baking chambers tailored for trays, Roman-style pizza and long-rise breads. Moretti Forni maintains service support and training through its “MorettiLAB” academy and global partner network, making it a trusted choice for chains and large-scale foodservice operations..
Features & Benefits
-
Pizza, bread, and pastry dough mixing for pizzerias, bakeries, and restaurant prep lines
-
Combined spiral and bowl rotation that kneads the full batch evenly and oxygenates the dough
-
Spiral profile that keeps dough temperature low and steady through the whole cycle
-
Two mixing speeds: slow for incorporating flour and water, fast for developing gluten
-
Three-phase motor that keeps torque up on stiff, low-hydration doughs
-
Built-in timer so you set the cycle and move to the next task
-
Stainless steel spiral, bowl, dough breaker, and safety grille that wipe down between batches
-
Dough breaker that holds the mass against the spiral instead of letting it ride the bowl wall
-
Chain drive on an oil-bath gear motor for quiet, maintenance-free transmission
-
Rotating transmission parts on sealed self-lubricating ball bearings
-
Thick powder-painted stainless steel frame that resists vibration under full load
-
Safety switch on the grille that stops the spiral when the guard is lifted
-
Control buttons on a separate auxiliary circuit that keeps mains power away from the panel
-
Rotating wheels for rolling the mixer into position in tight prep areas
-
Fixed head and fixed bowl with no lift mechanism to adjust or maintain
Resources & Downloads
See all from Moretti Forni
Specifications
| Dough Capacity | 84 lb (38 kg) |
| Bowl Volume | 10.57 gal (40 L) |
| Bowl Material | Stainless steel |
| Bowl Type | Fixed |
| Head | Fixed |
| Bowl Internal Diameter | 17 23/32" (450 mm) |
| Bowl Internal Height | 10 1/4" (260 mm) |
| Spiral Diameter | 7/8" (22 mm) |
| Spiral Material | Stainless steel |
| Dough Breaker | Stainless steel |
| Speeds | 2 |
| Drive System | Chain drive, oil-bath gear motor |
| Bearings | Self-lubricating ball bearings |
| Motor Power | 2.2 kW |
| Voltage / Phase / Hz | 208 V / 3 Ph / 60 Hz |
| Amperage | 9.0 A |
| Controls | Push-button panel, right side |
| Control Circuit | Low-voltage auxiliary |
| Timer | Yes |
| Safety Grille | Stainless steel, safety switch |
| Frame Construction | Powder-painted stainless steel |
| Casters | Rotating wheels |
| Caster Diameter | 2 3/8" |
| Power Cable Length | 59" (1500 mm) |
| Overall Dimensions W x D x H | 17 23/32" x 31 11/16" x 29 15/16" (450 x 805 x 760 mm) |
| Height with Grille Raised | 38 31/32" |
| Net Weight | 247 lb (112 kg) |
| Shipping Dimensions W x D x H | 20 15/32" x 32 11/16" x 33 3/32" (520 x 830 x 840 mm) |
| Shipping Weight | 263 lb (119 kg) |
| Country of Origin | Italy |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Certifications & Approvals
-
CE Listed
-
ETL US & Canada
-
Made in Italy

