Omcan 11014 #32 Cast Iron Manual Meat Grinder, Light-Duty

A commercial meat grinder cuts whole or trimmed muscle into ground meat. It forces meat through a rotating worm screw and cutting plate. Butcher shops, sausage producers, delis, and food processors use them to produce ground beef, pork, chicken, sausage filling, and burger blends. It is also called a commercial meat grinder machine, electric meat grinder, industrial meat grinder, or commercial meat mincer.

The right commercial meat grinder depends on three things: daily output volume, plate size, and motor horsepower. Plate size is measured by hub number. The smallest at #8 handles around 150 to 260 pounds per hour. The largest at #42 handles over 1,300 pounds per hour. Light-duty units handle low-volume grinding. Moderate-duty units cover mid-volume daily production. Heavy-duty units run continuous shifts in butcher shops and processors.

Every grinder in this collection is built for daily commercial use with stainless steel, cast iron, or aluminum construction. Common configurations, buying guidance, and frequent buyer questions follow below.

Common Types and Configurations

• Light-duty meat grinder: #8 or #12 plate size, smaller motors from 370W to around 1 HP. Suited to delis and restaurants grinding short runs of 200 pounds per day or less.
• Moderate-duty meat grinder: #12 or #22 plate size, motors from 1 HP to 1.5 HP. Covers mid-volume butcher shops and restaurants grinding 200 to 500 pounds per day.
• Heavy-duty meat grinder: #22, #32, or #42 plate size, motors from 1.5 HP through 7 HP. Built for high-volume butcher shops, sausage producers, and food processors running continuous shifts.
• Bench and countertop grinder: Sits on a worktop or dedicated bench. Compact format for delis and back-of-house prep where floor space is limited.
• Floor model meat grinder: Larger commercial unit on a dedicated floor station. Higher output capacity and stronger drive train for all-day production.
• Mixer-grinder combination unit: Grinds and mixes in one machine. Suited to operations that produce seasoned ground product or sausage and want to consolidate stations.
• Gear-driven vs belt-driven: Gear-driven units deliver higher torque for dense product. Belt-driven units run quieter and absorb shock loads.

What to Look at Before You Buy

• Daily output volume: Match capacity to peak shifts. Our catalog runs from 150 pounds per hour up to 1,320 pounds per hour. Size for your busiest day.
• Plate size (#8 to #42): The hub number sets the plate diameter and throat size. A #8 plate handles small runs. A #12 or #22 plate covers mid-volume operations. A #32 or #42 plate is heavy commercial.
• Motor horsepower: Catalog motors range from 370W through 7 HP. Light deli work suits 1/2 HP to 1 HP. Heavy production needs 1.5 HP through 3 HP.
• Bench vs floor model: Bench units cost less and fit existing counter space. Floor models handle higher volume on a dedicated base under heavy load.
• Gear-drive vs belt-drive: Gear-driven units deliver more torque for dense product and frozen trim. Belt-driven units run quieter and protect the motor.
• Safety features: Look for an interlocked feed pan, a properly-sized feed throat, and a reverse switch to clear jams. Confirm NSF or equivalent foodservice standards.
• Cleaning access: Removable worm, plate, and knife matter for daily sanitation. Stainless steel food-contact surfaces are the foodservice standard.

Frequently Asked Questions

What are the different types of commercial meat grinders?

Commercial meat grinders come in three duty levels. Light-duty handles low-volume runs with #8 or #12 plates and smaller motors. Moderate-duty covers mid-volume daily production with #12 or #22 plates and 1 to 1.5 HP. Heavy-duty runs continuous high-volume shifts with #22, #32, or #42 plates and 1.5 HP up through 7 HP. Bench and countertop formats fit smaller spaces. Floor models handle the highest output. Mixer-grinder combinations grind and mix in one machine for sausage and seasoned product workflows.

How do I choose the right size commercial meat grinder?

Match plate size and motor horsepower to your peak daily output. Low-volume delis grinding under 200 pounds per day suit a #8 or #12 plate with a 1/2 to 1 HP motor. Mid-volume butcher shops grinding 200 to 500 pounds per day need a #22 plate with 1 to 1.5 HP. High-volume processors grinding 500 pounds or more need a #32 or #42 plate with 1.5 HP through 7 HP. For frozen trim or dense product, choose gear-driven for higher torque.

How do you maintain a commercial meat grinder?

Daily maintenance keeps a commercial meat grinder running and meets health code. After each use: power off, disassemble the head, then remove the worm, plate, and knife. Wash all removable parts with hot soapy water, rinse, sanitize, and air-dry. Wipe down the motor housing without submerging it. Lubricate moving parts per the schedule. Sharpen or replace the knife and plate when quality drops. Always follow the manufacturer's specific cleaning and maintenance procedure and use food-safe sanitizers approved for grinder contact surfaces.

Related Categories

• Meat Slicers
• Meat Mixers
• Sausage Stuffers
• Meat & Bone Saws

Shop by Brand

• AMPTO
• American Eagle Food Machinery
• Axis
• Chef's Choice
• Omcan
• Prepline
• Pro-Cut
• Sirman
• Skyfood
• Univex

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.