The Omcan 13124 Locker
This Omcan single tier, single bank steel locker gives one staff member a full-height compartment in a change room or locker room. The single compartment measures 18 inches deep, 12 inches wide and 71 inches high inside a cabinet that stands 18 by 12 by 78 inches (457 x 305 x 1981 mm), so check the ceiling clearance where it will stand and allow 12 inches of wall run for each locker you line up in a row. It is shipped knocked down and assembly is required; the panels bolt together with self-tapping screws, and Omcan offers an assembly service on request as item 99957.
One Full-Height 71 Inch Compartment
The single compartment gives you 71 inches of interior height on an 18 inch deep, 12 inch wide footprint. Omcan builds the same 18 by 12 by 78 inch cabinet in two, three, four, five and six tier versions as well, so a row can mix one full-height column with shorter compartments.
16-Gauge Door Frame on a 24-Gauge Steel Body
The door frame is made of 16-gauge steel while all other exterior parts are 24-gauge. The door carries a recessed handle cup with a key lock, and louvered vents are formed into the door face.
Beige Painted Steel for Staff Change Rooms
The painted steel construction and beige finish are made for staff change rooms and locker rooms, where the locker offers security and convenience for employee belongings.
Knocked Down for On-Site Assembly
The locker ships as flat panels. The left side and back plate bolt together with 5 x 12 self-tapping screws, the right side follows the same way, the door frame fixes onto both side plates, then the bottom plate and vertical panels go in. Four bracket feet fasten to the base with self-tapping screws to finish the job. If you would rather not assemble it, Omcan lists an assembly service as item 99957.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Single full-height compartment, 71 inches high inside, for one person's belongings
-
Door frame made of 16-gauge steel; all other exterior parts 24-gauge
-
Beige painted steel finish for staff change rooms and locker rooms
-
Recessed handle cup with a key lock and louvered vents in the door
-
Stands on four bracket feet fastened with self-tapping screws
-
Ships knocked down; side, back, door frame, top and bottom panels bolt together with self-tapping screws
-
Omcan offers an assembly service on request, listed as item 99957
-
Same 18 by 12 by 78 inch cabinet offered in two to six tier versions
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Single full-height compartment, 71 inches high inside, for one person's belongings
Door frame made of 16-gauge steel; all other exterior parts 24-gauge
Beige painted steel finish for staff change rooms and locker rooms
Recessed handle cup with a key lock and louvered vents in the door
Stands on four bracket feet fastened with self-tapping screws
The Omcan 13124 Locker
This Omcan single tier, single bank steel locker gives one staff member a full-height compartment in a change room or locker room. The single compartment measures 18 inches deep, 12 inches wide and 71 inches high inside a cabinet that stands 18 by 12 by 78 inches (457 x 305 x 1981 mm), so check the ceiling clearance where it will stand and allow 12 inches of wall run for each locker you line up in a row. It is shipped knocked down and assembly is required; the panels bolt together with self-tapping screws, and Omcan offers an assembly service on request as item 99957.
One Full-Height 71 Inch Compartment
The single compartment gives you 71 inches of interior height on an 18 inch deep, 12 inch wide footprint. Omcan builds the same 18 by 12 by 78 inch cabinet in two, three, four, five and six tier versions as well, so a row can mix one full-height column with shorter compartments.
16-Gauge Door Frame on a 24-Gauge Steel Body
The door frame is made of 16-gauge steel while all other exterior parts are 24-gauge. The door carries a recessed handle cup with a key lock, and louvered vents are formed into the door face.
Beige Painted Steel for Staff Change Rooms
The painted steel construction and beige finish are made for staff change rooms and locker rooms, where the locker offers security and convenience for employee belongings.
Knocked Down for On-Site Assembly
The locker ships as flat panels. The left side and back plate bolt together with 5 x 12 self-tapping screws, the right side follows the same way, the door frame fixes onto both side plates, then the bottom plate and vertical panels go in. Four bracket feet fasten to the base with self-tapping screws to finish the job. If you would rather not assemble it, Omcan lists an assembly service as item 99957.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Single full-height compartment, 71 inches high inside, for one person's belongings
-
Door frame made of 16-gauge steel; all other exterior parts 24-gauge
-
Beige painted steel finish for staff change rooms and locker rooms
-
Recessed handle cup with a key lock and louvered vents in the door
-
Stands on four bracket feet fastened with self-tapping screws
-
Ships knocked down; side, back, door frame, top and bottom panels bolt together with self-tapping screws
-
Omcan offers an assembly service on request, listed as item 99957
-
Same 18 by 12 by 78 inch cabinet offered in two to six tier versions
Resources & Downloads
See all from Omcan
Specifications
| Tiers | 1 |
| Banks | 1 |
| Number of Compartments | 1 |
| Compartment Width | 12 in |
| Compartment Depth | 18 in |
| Compartment Height | 71 in |
| Overall Width | 12 in |
| Overall Depth | 18 in |
| Overall Height | 78 in |
| Overall Dimensions (Metric) | 457 x 305 x 1981 mm |
| Construction | Painted steel |
| Door Frame | 16-gauge steel |
| Other Exterior Parts | 24-gauge steel |
| Color | Beige |
| Handle | Recessed, with key lock |
| Base | Four bracket feet |
| Assembly | Knocked down, assembly required |
| Optional Assembly Service | Item 99957 |
Manufacturer's Warranty
-
6 Month
Warranty
Single full-height compartment, 71 inches high inside, for one person's belongings