The Omcan 19146 Work Table
This Omcan all-stainless work table gives you a 72 by 30 inch top with a full-length undershelf below. The table is made of all 20-gauge 430 stainless steel, including the undershelf, hat channel, legs, sockets and bullet feet. The flat top has no backsplash, which lets the table stand on its own or butt against a neighboring table, and the work surface sits 34 inches high. At 72 inches long it needs a real stretch of floor, so measure your wall run before you pick its spot. Installation is easy: the legs fit sockets under the table and each leg is secured with a single set screw.
20-Gauge 430 Stainless Steel Top
The top is 20-gauge 430 stainless steel, a durable, easy-to-clean surface for food prep and daily tasks, on a table meant to hold heavy equipment. The support channels beneath the top are secured with bolts and acorn-style nuts.
Flat Top with No Backsplash
With no backsplash, this table is not tied to a wall: run it freestanding, set it back to back with another table, or slide it flush against another flat-top table. The same 30 x 72 inch table with a backsplash is a separate item, 44347.
Full-Length Undershelf for Storage
The undershelf is 20-gauge 430 stainless steel, offers storage under the full top, and is reinforced with welded V-pipe leg supports. The matching 30 x 72 inch undershelf, item 21619, is rated for 529.1 pounds, and is sold separately as a replacement that also fits the backsplash version, item 44347.
Four Stainless Steel Legs with Bullet Feet
Four socketed stainless steel legs carry the span, and the table is rated for a 1234.6 pound load capacity (560 kg). Each leg finishes in a bullet foot. The bullet feet are stainless steel. Plastic bullet feet level the table on uneven floors, and stainless steel (item 39313), plastic (item 23510) and adjustable (item 23520) bullet feet are all listed as accessories for the table.
Socket and Set-Screw Assembly with an Optional Leg Brace
Each leg fits a socket under the top and is secured with a single set screw, so the table goes together at the install point. A galvanized leg brace, item 39386, is sold separately; the brace allows removal of the undershelf to convert the table into a sitting table. A drawer for 30 inch worktables, item 24579, and 5 inch casters, item 47599 without brake and item 14395 with brake, are also listed as accessories.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
All-stainless work table with a 72 x 30 inch top and a full-length undershelf
-
20 gauge 430 stainless steel top that is durable and easy to clean
-
Flat top with no backsplash, so the table can stand free or butt against another table
-
Support channels under the top secured with bolts and acorn-style nuts
-
Undershelf reinforced with welded V-pipe leg supports
-
Four socketed stainless steel legs, each secured with a single set screw and finished with a bullet foot
-
Easy installation, with the legs fitting sockets under the table
-
Optional galvanized leg brace, item 39386, lets the undershelf come out to convert the table into a sitting table
-
Matching replacement undershelf, item 21619, sold separately
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
All-stainless work table with a 72 x 30 inch top and a full-length undershelf
20 gauge 430 stainless steel top that is durable and easy to clean
Flat top with no backsplash, so the table can stand free or butt against another table
Support channels under the top secured with bolts and acorn-style nuts
Undershelf reinforced with welded V-pipe leg supports
The Omcan 19146 Work Table
This Omcan all-stainless work table gives you a 72 by 30 inch top with a full-length undershelf below. The table is made of all 20-gauge 430 stainless steel, including the undershelf, hat channel, legs, sockets and bullet feet. The flat top has no backsplash, which lets the table stand on its own or butt against a neighboring table, and the work surface sits 34 inches high. At 72 inches long it needs a real stretch of floor, so measure your wall run before you pick its spot. Installation is easy: the legs fit sockets under the table and each leg is secured with a single set screw.
20-Gauge 430 Stainless Steel Top
The top is 20-gauge 430 stainless steel, a durable, easy-to-clean surface for food prep and daily tasks, on a table meant to hold heavy equipment. The support channels beneath the top are secured with bolts and acorn-style nuts.
Flat Top with No Backsplash
With no backsplash, this table is not tied to a wall: run it freestanding, set it back to back with another table, or slide it flush against another flat-top table. The same 30 x 72 inch table with a backsplash is a separate item, 44347.
Full-Length Undershelf for Storage
The undershelf is 20-gauge 430 stainless steel, offers storage under the full top, and is reinforced with welded V-pipe leg supports. The matching 30 x 72 inch undershelf, item 21619, is rated for 529.1 pounds, and is sold separately as a replacement that also fits the backsplash version, item 44347.
Four Stainless Steel Legs with Bullet Feet
Four socketed stainless steel legs carry the span, and the table is rated for a 1234.6 pound load capacity (560 kg). Each leg finishes in a bullet foot. The bullet feet are stainless steel. Plastic bullet feet level the table on uneven floors, and stainless steel (item 39313), plastic (item 23510) and adjustable (item 23520) bullet feet are all listed as accessories for the table.
Socket and Set-Screw Assembly with an Optional Leg Brace
Each leg fits a socket under the top and is secured with a single set screw, so the table goes together at the install point. A galvanized leg brace, item 39386, is sold separately; the brace allows removal of the undershelf to convert the table into a sitting table. A drawer for 30 inch worktables, item 24579, and 5 inch casters, item 47599 without brake and item 14395 with brake, are also listed as accessories.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
All-stainless work table with a 72 x 30 inch top and a full-length undershelf
-
20 gauge 430 stainless steel top that is durable and easy to clean
-
Flat top with no backsplash, so the table can stand free or butt against another table
-
Support channels under the top secured with bolts and acorn-style nuts
-
Undershelf reinforced with welded V-pipe leg supports
-
Four socketed stainless steel legs, each secured with a single set screw and finished with a bullet foot
-
Easy installation, with the legs fitting sockets under the table
-
Optional galvanized leg brace, item 39386, lets the undershelf come out to convert the table into a sitting table
-
Matching replacement undershelf, item 21619, sold separately
Resources & Downloads
See all from Omcan
Specifications
| Overall Width | 72 in |
| Overall Depth | 30 in |
| Overall Height | 34 in |
| Top Style | Flat, no backsplash |
| Top Material | 430 stainless steel |
| Top Gauge | 20 gauge |
| Support Channels | Bolted with acorn-style nuts |
| Hat Channel | Stainless steel |
| Undershelf | Included, 20-gauge 430 stainless steel |
| Undershelf Supports | Welded V-pipe leg supports |
| Undershelf Load Capacity | 529.1 lb |
| Number of Legs | 4 |
| Legs | Stainless steel, socket and single set screw |
| Feet | Stainless steel bullet |
| Load Capacity | 1234.6 lb (560 kg) |
| Assembly | Legs attach on site |
| Replacement Undershelf | Item 21619 |
| Optional Leg Brace | Item 39386, galvanized |
| Optional Drawer | Item 24579 |
| Optional Casters | Items 47599, 14395 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
All-stainless work table with a 72 x 30 inch top and a full-length undershelf