The Omcan 22062 Equipment Stand
This Omcan equipment stand gives a countertop fryer, griddle, or charbroiler a dedicated 72 by 30 inch home at 24 inches off the floor. The top is 18-gauge type 430 stainless steel with a 1-1/2 inch lip at the rear and sides, the legs are galvanized steel, and an 18-gauge galvanized undershelf below adds a second storage level. The top carries 680 pounds and the shelf another 500, so plan the whole station on it, not just one piece. Measure your cook line first: the stand runs 72 inches wide and 30 inches deep, and the adjustable feet let you level it once it is in place.
18-Gauge Type 430 Stainless Steel Top
The work surface is formed from 18-gauge type 430 stainless steel and sits on a galvanized hat channel beneath the top. The top is 2 inches deep at its edge, and the legs set in 3-5/16 inches from each end and 3-15/16 inches from the front and back.
1-1/2 Inch Lip at the Rear and Sides
The top turns up 1-1/2 inches along the back and both ends, while the front edge stays flat, so you can slide a unit on from the front instead of lifting it over a lip.
680-Pound Rating at a 24-Inch Working Height
Rated to 680 pounds, the top carries your countertop equipment at a 24 inch table height, and the undershelf below is rated separately.
Galvanized Undershelf Rated to 500 Pounds
The 18-gauge galvanized undershelf is rated to 500 pounds. The legs stand 65-3/8 inches apart along the length and 22-1/8 inches front to back, which sets the footprint for what fits below.
Galvanized Legs with Adjustable Bullet Feet
Four 1-5/8 inch diameter galvanized steel legs fit galvanized leg sockets and end in adjustable plastic bullet feet, so you can take the wobble out on an uneven kitchen floor. Omcan lists a replacement undershelf for this stand as item 47558, a 10 x 72 inch adjustable wooden cutting board as item 47569, and 5 inch casters as items 47599 (without brake) and 14395 (with brake); a 30 x 72 inch undershelf for standard work tables, item 22105, is also listed for it.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Puts a countertop fryer, griddle, or charbroiler on a 24 inch high stand on the line
-
18-gauge type 430 stainless steel top on a galvanized hat channel
-
Raised 1-1/2 inch lip at the rear and sides with a flat front edge
-
18-gauge galvanized undershelf adds a second level under the top
-
Four galvanized steel legs in galvanized leg sockets
-
Adjustable plastic bullet feet level the stand on uneven kitchen floors
-
Optional add-ons listed for this stand: replacement undershelf (item 47558), adjustable wooden cutting board (item 47569), and 5 inch casters (items 47599 and 14395)
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Puts a countertop fryer, griddle, or charbroiler on a 24 inch high stand on the line
18-gauge type 430 stainless steel top on a galvanized hat channel
Raised 1-1/2 inch lip at the rear and sides with a flat front edge
18-gauge galvanized undershelf adds a second level under the top
Four galvanized steel legs in galvanized leg sockets
The Omcan 22062 Equipment Stand
This Omcan equipment stand gives a countertop fryer, griddle, or charbroiler a dedicated 72 by 30 inch home at 24 inches off the floor. The top is 18-gauge type 430 stainless steel with a 1-1/2 inch lip at the rear and sides, the legs are galvanized steel, and an 18-gauge galvanized undershelf below adds a second storage level. The top carries 680 pounds and the shelf another 500, so plan the whole station on it, not just one piece. Measure your cook line first: the stand runs 72 inches wide and 30 inches deep, and the adjustable feet let you level it once it is in place.
18-Gauge Type 430 Stainless Steel Top
The work surface is formed from 18-gauge type 430 stainless steel and sits on a galvanized hat channel beneath the top. The top is 2 inches deep at its edge, and the legs set in 3-5/16 inches from each end and 3-15/16 inches from the front and back.
1-1/2 Inch Lip at the Rear and Sides
The top turns up 1-1/2 inches along the back and both ends, while the front edge stays flat, so you can slide a unit on from the front instead of lifting it over a lip.
680-Pound Rating at a 24-Inch Working Height
Rated to 680 pounds, the top carries your countertop equipment at a 24 inch table height, and the undershelf below is rated separately.
Galvanized Undershelf Rated to 500 Pounds
The 18-gauge galvanized undershelf is rated to 500 pounds. The legs stand 65-3/8 inches apart along the length and 22-1/8 inches front to back, which sets the footprint for what fits below.
Galvanized Legs with Adjustable Bullet Feet
Four 1-5/8 inch diameter galvanized steel legs fit galvanized leg sockets and end in adjustable plastic bullet feet, so you can take the wobble out on an uneven kitchen floor. Omcan lists a replacement undershelf for this stand as item 47558, a 10 x 72 inch adjustable wooden cutting board as item 47569, and 5 inch casters as items 47599 (without brake) and 14395 (with brake); a 30 x 72 inch undershelf for standard work tables, item 22105, is also listed for it.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Puts a countertop fryer, griddle, or charbroiler on a 24 inch high stand on the line
-
18-gauge type 430 stainless steel top on a galvanized hat channel
-
Raised 1-1/2 inch lip at the rear and sides with a flat front edge
-
18-gauge galvanized undershelf adds a second level under the top
-
Four galvanized steel legs in galvanized leg sockets
-
Adjustable plastic bullet feet level the stand on uneven kitchen floors
-
Optional add-ons listed for this stand: replacement undershelf (item 47558), adjustable wooden cutting board (item 47569), and 5 inch casters (items 47599 and 14395)
Resources & Downloads
See all from Omcan
Specifications
| Top Size | 30 x 72 in |
| Overall Width | 72 in |
| Overall Depth | 30 in |
| Table Height | 24 in |
| Top Material | 430 stainless steel |
| Top Gauge | 18 gauge |
| Lip Size | 1-1/2 in, rear and sides |
| Top Edge Depth | 2 in |
| Hat Channel | Galvanized |
| Undershelf | 18 gauge galvanized |
| Leg Spacing, Length | 65-3/8 in |
| Leg Spacing, Depth | 22-1/8 in |
| Leg Inset from Ends | 3-5/16 in |
| Leg Inset from Front and Back | 3-15/16 in |
| Legs | Galvanized steel, galvanized sockets |
| Leg Diameter | 1-5/8 in |
| Feet | Adjustable plastic bullet feet |
| Load Capacity | 680 lb |
| Undershelf Capacity | 500 lb |
| Weight | 84 lb |
| Replacement Undershelf | Item 47558 |
| Cutting Board Accessory | Item 47569, 10 x 72 in |
| Caster Accessories | Items 47599, 14395 (5 in) |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Puts a countertop fryer, griddle, or charbroiler on a 24 inch high stand on the line