The Omcan 23990 Double Overshelf
This Omcan double deck overshelf mounts to the top of a 72 inch worktable and turns the unused air above your prep surface into two working storage shelves. Instead of walking to a wall shelf for wraps, seasonings, or containers in the middle of service, you keep them right over the table where you are already standing. The unit carries a 209 lb load rating. It rises 32 inches above the table surface, so check the clearance under your hood, shelving, or low ceiling along that wall run first. The posts stand in stainless steel sockets on base bars that sit on the tabletop, so plan on mounting it to an existing table rather than using it freestanding.
Two Tiers of Storage Above the Worktable
The double tier layout stacks two full length shelves on one set of posts to make the most of the space above the table. Each shelf runs the full 72 inch length and 14 inch depth of the unit, with a 1-1/2 inch formed edge, and the overall depth of 14 inches keeps the unit to a slim strip along the back of the table.
18-Gauge 430 Stainless Steel Construction
The shelves are formed from 18-gauge type 430 stainless steel for durability and easy cleaning, with a convenient and simple design that wipes down at the end of the shift.
Bottom Shelf Adjusts Up and Down
The lower shelf repositions vertically on the posts, so you can open up headroom above the table for tall containers or drop the shelf lower to keep frequently used items closer to hand. That adjustment lets one shelf layout serve different stations without any refabrication.
Leg and Socket Post Mounting
Six stainless steel posts, 1-1/4 inches in diameter, carry the shelves in three pairs on the 72 inch run, with a center pair that splits the run into two 35-5/16 inch bays; the posts in each pair stand 12-5/8 inches apart front to back. Each pair stands in sockets on a 14 inch base bar drilled with mounting holes, and the posts drop into the sockets, which makes the install straightforward on a flat stainless table top. The shelf runs 72 inches end to end and fits Omcan worktables 17582, 17588, 23798, 23805, 22068, 22075, 22083, 22090, 19140, 19146, 44340, 44347, 28635, 43239, 43240, 44301, 44302, 43243, 43244, 44188, 44194, 43482, 45283, 44191, 44197, 43485, 45286, 43721, 28644, 24399, 24405, 24402, and 24408.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Overhead storage for prep and dish tables in kitchens that have run out of counter space
-
Two full width shelves keep wraps, seasonings, and smallwares within reach above the table
-
Double tier layout adds a second shelf on the same posts without taking any additional table depth
-
Formed 1-1/2 in shelf edge on each tier
-
Lower shelf repositions up and down on the posts to clear tall containers
-
Type 430 stainless steel wipes clean with everyday kitchen cleaners
-
Six support posts in three pairs split the 72 in run into two 35-5/16 in bays
-
Stainless steel leg and socket bases on drilled base bars anchor the posts to the tabletop
-
Slim 14 in overall depth keeps the unit to a strip along the back of the table
-
Sized for a listed range of Omcan 72 in worktables
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Overhead storage for prep and dish tables in kitchens that have run out of counter space
Two full width shelves keep wraps, seasonings, and smallwares within reach above the table
Double tier layout adds a second shelf on the same posts without taking any additional table depth
Formed 1-1/2 in shelf edge on each tier
Lower shelf repositions up and down on the posts to clear tall containers
The Omcan 23990 Double Overshelf
This Omcan double deck overshelf mounts to the top of a 72 inch worktable and turns the unused air above your prep surface into two working storage shelves. Instead of walking to a wall shelf for wraps, seasonings, or containers in the middle of service, you keep them right over the table where you are already standing. The unit carries a 209 lb load rating. It rises 32 inches above the table surface, so check the clearance under your hood, shelving, or low ceiling along that wall run first. The posts stand in stainless steel sockets on base bars that sit on the tabletop, so plan on mounting it to an existing table rather than using it freestanding.
Two Tiers of Storage Above the Worktable
The double tier layout stacks two full length shelves on one set of posts to make the most of the space above the table. Each shelf runs the full 72 inch length and 14 inch depth of the unit, with a 1-1/2 inch formed edge, and the overall depth of 14 inches keeps the unit to a slim strip along the back of the table.
18-Gauge 430 Stainless Steel Construction
The shelves are formed from 18-gauge type 430 stainless steel for durability and easy cleaning, with a convenient and simple design that wipes down at the end of the shift.
Bottom Shelf Adjusts Up and Down
The lower shelf repositions vertically on the posts, so you can open up headroom above the table for tall containers or drop the shelf lower to keep frequently used items closer to hand. That adjustment lets one shelf layout serve different stations without any refabrication.
Leg and Socket Post Mounting
Six stainless steel posts, 1-1/4 inches in diameter, carry the shelves in three pairs on the 72 inch run, with a center pair that splits the run into two 35-5/16 inch bays; the posts in each pair stand 12-5/8 inches apart front to back. Each pair stands in sockets on a 14 inch base bar drilled with mounting holes, and the posts drop into the sockets, which makes the install straightforward on a flat stainless table top. The shelf runs 72 inches end to end and fits Omcan worktables 17582, 17588, 23798, 23805, 22068, 22075, 22083, 22090, 19140, 19146, 44340, 44347, 28635, 43239, 43240, 44301, 44302, 43243, 43244, 44188, 44194, 43482, 45283, 44191, 44197, 43485, 45286, 43721, 28644, 24399, 24405, 24402, and 24408.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Overhead storage for prep and dish tables in kitchens that have run out of counter space
-
Two full width shelves keep wraps, seasonings, and smallwares within reach above the table
-
Double tier layout adds a second shelf on the same posts without taking any additional table depth
-
Formed 1-1/2 in shelf edge on each tier
-
Lower shelf repositions up and down on the posts to clear tall containers
-
Type 430 stainless steel wipes clean with everyday kitchen cleaners
-
Six support posts in three pairs split the 72 in run into two 35-5/16 in bays
-
Stainless steel leg and socket bases on drilled base bars anchor the posts to the tabletop
-
Slim 14 in overall depth keeps the unit to a strip along the back of the table
-
Sized for a listed range of Omcan 72 in worktables
Resources & Downloads
See all from Omcan
Specifications
| Construction Material | 18-gauge 430 stainless steel |
| Steel Type | Type 430 stainless |
| Steel Gauge | 18 gauge |
| Shelf Configuration | Double deck |
| Number of Shelves | 2 |
| Load Rating | 209 lb (94.8 kg) |
| Overall Width | 72 in |
| Overall Depth | 14 in |
| Overall Height | 32 in |
| Shelf Edge Height | 1-1/2 in |
| Post Spacing, Lengthwise | 35-5/16 in per bay |
| Post Spacing, Front to Back | 12-5/8 in |
| Post Diameter | 1-1/4 in (32 mm) |
| Base Bar Length | 14 in (355.6 mm) |
| Socket Height | 1-7/16 in (36 mm) |
| Bottom Shelf | Height adjustable |
| Support Posts | 6 |
| Mounting Style | Table mounted, leg and socket |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Overhead storage for prep and dish tables in kitchens that have run out of counter space