The Omcan 25257 2 Compartment Sink
This Omcan two compartment pot sink has two 24 x 24 inch bowls that are 14 inches deep, with a corner drain and a drain guard in each bowl. A right-side drain board, 24 inches wide, sits beside the bowls. The whole unit runs 74-1/2 inches wide, so measure your wall run before ordering. The sink ships with its legs removed, and the legs attach on site.
Two 24-Inch Square Bowls
Each bowl measures 24 x 24 inches and is 14 inches deep, with a 2 inch partition between the two bowls. There is a 3/4 inch radius where the bowl walls meet the bottom and a 3/4 inch radius at the rolled front edge of the top.
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. A backsplash runs along the back edge of the top with a 2 inch return at the top, and the legs are 16-gauge galvanized steel.
Corner Drains and Faucet Holes
A 1.8 inch drain sits in the corner of each bowl, and both bowls come with drain guards. Two faucet holes are drilled in the backsplash, 1-1/8 inches across and 8 inches apart. The right-hand drain board is 24 inches wide and the faucet holes are placed over the bowls. Splash mounted faucets are offered for this sink as related accessories, items 23516, 23517, 47819 and 22289, along with pre-rinse assemblies, items 22123 and 22124.
Right Drain Board
The drain board is on the right of the bowls and measures 24 inches wide, running the full front-to-back depth of the top. The sink's four legs sit under the bowl section, with no leg under the drain board.
Overall Dimensions
The sink measures 74-1/2 inches wide, 29-1/2 inches front to back and 44 inches high. The legs sit on 43-1/2 x 19-1/2 inch centers, and the dimensioned height is 43-3/4 inches, against the 44 inch overall figure.
Knockdown Design and Accessories
The sink is shipped with the legs removed. Installation is a matter of fixing the legs to the underside with screws, then installing the drain fitting, drain guard and drain pipe. Optional accessories include a leg brace, item 21140, a 24 x 24 inch removable stainless steel drain board, item 21143, and left and right stainless steel splash guards for 24 x 24 inch pot sinks, items 47733 and 47734.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with two 24 x 24 inch bowls, each 14 inches deep.
-
A corner drain in each bowl, with drain guards included.
-
18-gauge stainless steel sink, with 16-gauge galvanized legs.
-
Two faucet holes in the backsplash, 1-1/8 inches across and 8 inches apart; splash mounted faucets are offered for this sink, including item 47819 with 8 inch centers.
-
A 3/4 inch radius where the bowl walls meet the bottom and a 2 inch partition between the bowls.
-
Drain board on the right side, 24 inches wide.
-
Shipped with the legs removed; the legs are fixed with screws on site.
-
Optional leg brace, item 21140, and left and right splash guards, items 47733 and 47734, are offered for this sink.
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Two compartment pot sink with two 24 x 24 inch bowls, each 14 inches deep.
A corner drain in each bowl, with drain guards included.
18-gauge stainless steel sink, with 16-gauge galvanized legs.
Two faucet holes in the backsplash, 1-1/8 inches across and 8 inches apart; splash mounted faucets are offered for this sink, including item 47819 with 8 inch centers.
A 3/4 inch radius where the bowl walls meet the bottom and a 2 inch partition between the bowls.
The Omcan 25257 2 Compartment Sink
This Omcan two compartment pot sink has two 24 x 24 inch bowls that are 14 inches deep, with a corner drain and a drain guard in each bowl. A right-side drain board, 24 inches wide, sits beside the bowls. The whole unit runs 74-1/2 inches wide, so measure your wall run before ordering. The sink ships with its legs removed, and the legs attach on site.
Two 24-Inch Square Bowls
Each bowl measures 24 x 24 inches and is 14 inches deep, with a 2 inch partition between the two bowls. There is a 3/4 inch radius where the bowl walls meet the bottom and a 3/4 inch radius at the rolled front edge of the top.
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. A backsplash runs along the back edge of the top with a 2 inch return at the top, and the legs are 16-gauge galvanized steel.
Corner Drains and Faucet Holes
A 1.8 inch drain sits in the corner of each bowl, and both bowls come with drain guards. Two faucet holes are drilled in the backsplash, 1-1/8 inches across and 8 inches apart. The right-hand drain board is 24 inches wide and the faucet holes are placed over the bowls. Splash mounted faucets are offered for this sink as related accessories, items 23516, 23517, 47819 and 22289, along with pre-rinse assemblies, items 22123 and 22124.
Right Drain Board
The drain board is on the right of the bowls and measures 24 inches wide, running the full front-to-back depth of the top. The sink's four legs sit under the bowl section, with no leg under the drain board.
Overall Dimensions
The sink measures 74-1/2 inches wide, 29-1/2 inches front to back and 44 inches high. The legs sit on 43-1/2 x 19-1/2 inch centers, and the dimensioned height is 43-3/4 inches, against the 44 inch overall figure.
Knockdown Design and Accessories
The sink is shipped with the legs removed. Installation is a matter of fixing the legs to the underside with screws, then installing the drain fitting, drain guard and drain pipe. Optional accessories include a leg brace, item 21140, a 24 x 24 inch removable stainless steel drain board, item 21143, and left and right stainless steel splash guards for 24 x 24 inch pot sinks, items 47733 and 47734.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with two 24 x 24 inch bowls, each 14 inches deep.
-
A corner drain in each bowl, with drain guards included.
-
18-gauge stainless steel sink, with 16-gauge galvanized legs.
-
Two faucet holes in the backsplash, 1-1/8 inches across and 8 inches apart; splash mounted faucets are offered for this sink, including item 47819 with 8 inch centers.
-
A 3/4 inch radius where the bowl walls meet the bottom and a 2 inch partition between the bowls.
-
Drain board on the right side, 24 inches wide.
-
Shipped with the legs removed; the legs are fixed with screws on site.
-
Optional leg brace, item 21140, and left and right splash guards, items 47733 and 47734, are offered for this sink.
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 2 |
| Bowl Size | 24 x 24 in |
| Bowl Depth | 14 in |
| Bowl Bottom Radius | 3/4 in |
| Partition Between Bowls | 2 in |
| Drain Location | Corner |
| Drain Size | 1.8 in |
| Drain Guards | Included |
| Faucet Hole Spacing | 8 in centers |
| Faucet Hole Diameter | 1-1/8 in |
| Drain Board | Right, 24 in wide |
| Material | 18-gauge stainless steel |
| Legs | 16-gauge galvanized steel |
| Leg Centers, W x D | 43-1/2 x 19-1/2 in |
| Assembly | Shipped with legs removed |
| Overall Width | 74-1/2 in |
| Overall Depth | 29-1/2 in |
| Overall Height | 44 in |
| Weight | 106 lb |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Two compartment pot sink with two 24 x 24 inch bowls, each 14 inches deep.