The Omcan 25261 3 Compartment Sink
This Omcan three compartment pot sink sets up a wash, rinse, and sanitize line with three 24 x 24 inch bowls that are 14 inches deep. A 24 inch wide drain board sits at each end, and the whole unit runs 120 inches wide by 29-1/2 inches front to back, so measure your wall run before ordering. The sink is 18-gauge stainless steel and ships with its 16-gauge galvanized legs removed for installation on site.
Three 24-Inch Square Bowls, 14 Inches Deep
Each bowl measures 24 x 24 inches and is 14 inches deep, with the drain opening in one corner. There is a 3/4 inch radius at the bowl corners and a 2 inch partition between neighboring bowls.
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. A backsplash runs the full width of the top and carries the faucet holes, and the legs are 16-gauge galvanized steel.
Corner Drains with Included Drain Guards
Each bowl drains through a 1.8 inch (4.6 cm) corner opening, and drain guards come with the sink. Four 1-1/8 inch faucet holes are punched in the backsplash in two pairs, with 8 inches between the holes of each pair. Splash-mounted 12 inch and 14 inch spout faucets (items 23516 and 23517) and pre-rinse assemblies (items 22123 and 22124) are available as related accessories for this sink.
Drain Boards on Both Ends
A 24 inch wide drain board at each end, matching the bowl width, brings the overall length to 120 inches. A removable 24 x 24 inch stainless steel drain board (item 21143) and left and right stainless steel splash guards for 24 x 24 inch pot sinks (items 47733 and 47734) are also available as related accessories.
Knockdown Legs
The sink ships with its 16-gauge galvanized legs removed. Installation starts with the legs fitting to the underside of the sink body, followed by the drain fitting and the drain guard. An optional leg brace for 24 x 24 inch three tub sinks is item 21141.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Three compartment pot sink for wash, rinse, and sanitize use, with 24 x 24 inch bowls 14 inches deep
-
Corner drain opening in each bowl, with drain guards included
-
Four 1-1/8 inch faucet holes in the backsplash, in two pairs 8 inches apart
-
24 inch wide drain boards on both ends
-
18-gauge stainless steel sink with 16-gauge galvanized legs
-
Ships with the legs removed for installation on site
-
Optional leg brace (item 21141) and drain board (item 21143) available, plus splash guards, faucets, and pre-rinse assemblies
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Three compartment pot sink for wash, rinse, and sanitize use, with 24 x 24 inch bowls 14 inches deep
Corner drain opening in each bowl, with drain guards included
Four 1-1/8 inch faucet holes in the backsplash, in two pairs 8 inches apart
24 inch wide drain boards on both ends
18-gauge stainless steel sink with 16-gauge galvanized legs
The Omcan 25261 3 Compartment Sink
This Omcan three compartment pot sink sets up a wash, rinse, and sanitize line with three 24 x 24 inch bowls that are 14 inches deep. A 24 inch wide drain board sits at each end, and the whole unit runs 120 inches wide by 29-1/2 inches front to back, so measure your wall run before ordering. The sink is 18-gauge stainless steel and ships with its 16-gauge galvanized legs removed for installation on site.
Three 24-Inch Square Bowls, 14 Inches Deep
Each bowl measures 24 x 24 inches and is 14 inches deep, with the drain opening in one corner. There is a 3/4 inch radius at the bowl corners and a 2 inch partition between neighboring bowls.
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. A backsplash runs the full width of the top and carries the faucet holes, and the legs are 16-gauge galvanized steel.
Corner Drains with Included Drain Guards
Each bowl drains through a 1.8 inch (4.6 cm) corner opening, and drain guards come with the sink. Four 1-1/8 inch faucet holes are punched in the backsplash in two pairs, with 8 inches between the holes of each pair. Splash-mounted 12 inch and 14 inch spout faucets (items 23516 and 23517) and pre-rinse assemblies (items 22123 and 22124) are available as related accessories for this sink.
Drain Boards on Both Ends
A 24 inch wide drain board at each end, matching the bowl width, brings the overall length to 120 inches. A removable 24 x 24 inch stainless steel drain board (item 21143) and left and right stainless steel splash guards for 24 x 24 inch pot sinks (items 47733 and 47734) are also available as related accessories.
Knockdown Legs
The sink ships with its 16-gauge galvanized legs removed. Installation starts with the legs fitting to the underside of the sink body, followed by the drain fitting and the drain guard. An optional leg brace for 24 x 24 inch three tub sinks is item 21141.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Three compartment pot sink for wash, rinse, and sanitize use, with 24 x 24 inch bowls 14 inches deep
-
Corner drain opening in each bowl, with drain guards included
-
Four 1-1/8 inch faucet holes in the backsplash, in two pairs 8 inches apart
-
24 inch wide drain boards on both ends
-
18-gauge stainless steel sink with 16-gauge galvanized legs
-
Ships with the legs removed for installation on site
-
Optional leg brace (item 21141) and drain board (item 21143) available, plus splash guards, faucets, and pre-rinse assemblies
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 3 |
| Bowl Size | 24 x 24 in |
| Bowl Depth | 14 in |
| Bowl Corner Radius | 3/4 in |
| Partition Between Bowls | 2 in |
| Drain Location | Corner |
| Drain Size | 1.8 in (4.6 cm) |
| Drain Guards | Included |
| Faucet Holes | 4 |
| Faucet Hole Diameter | 1-1/8 in |
| Faucet Hole Spacing | 8 in |
| Drain Board | Left and right, 24 in wide each |
| Material | 18-gauge stainless steel |
| Legs | 16-gauge galvanized steel |
| Assembly | Shipped with legs removed |
| Overall Width | 120 in |
| Overall Depth | 29-1/2 in |
| Overall Height | 44 in |
| Weight | 150 lb |
| Optional Leg Brace | Item 21141 |
| Optional Drain Board | Item 21143 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Three compartment pot sink for wash, rinse, and sanitize use, with 24 x 24 inch bowls 14 inches deep