The Omcan 25269 2 Compartment Sink
This Omcan two compartment pot sink has two 18 x 21 inch bowls, each 14 inches deep, with a corner drain and a drain guard for each bowl. An 18 inch drain board on each side of the bowls brings the overall width to 72 inches, and the sink stands 44 inches tall overall. The sink is 18-gauge stainless steel, shipped with its 16-gauge galvanized legs removed for attachment on site.
Two 18 by 21 Inch Bowls, 14 Inches Deep
Each bowl measures 18 inches side to side and 21 inches front to back and is 14 inches deep, with a 2 inch partition between the bowls. There are 3/4 inch radii where the deck rolls into the bowls and at the bowl bottom corners.
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The top of the backsplash is 9-3/4 inches above the underside of the 2-1/2 inch deck edge, and the backsplash is returned 2 inches at the top. The legs are 16-gauge galvanized steel.
Corner Drains with Included Drain Guards
Each bowl has a 1.8 inch (4.6 cm) drain in its corner, and the sink comes with drain guards; each guard is a perforated piece that stands in the bowl corner over the drain. A center drain version of this layout is offered as item 43782. Two 1-1/8 inch faucet holes are punched on 8 inch centers in the backsplash, with their centerline 39 inches above the floor.
Drain Boards on Both Sides of the Bowls
An 18 inch drain board sits on each side of the two bowls, for an overall footprint of 72 inches wide by 26-1/2 inches deep. The same bowls without a drain board, with a left drain board or with a right drain board are items 25266, 25267 and 25268, and a removable knockdown drain board for 18 x 21 inch tub sinks is offered as item 23326.
Knockdown Design with Galvanized Legs
The sink ships with its 16-gauge galvanized legs removed. At installation the legs fit into sockets under the sink and are secured with fasteners, then the drain, the corner drain guard and a standpipe are fitted. The legs sit 31-1/2 inches apart across the front and 16-1/2 inches front to back, and they end in bullet feet. An optional leg brace for 18 x 21 inch two tub sinks is item 31485, and splash-mounted faucets (items 39256, 23516, 47819 and 22289), pre-rinse assemblies (22123 and 22124) and left and right splash guards (47731 and 47732) are offered as related accessories.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with two 18 x 21 inch bowls, each 14 inches deep
-
Corner drain in each bowl, 1.8 inches (4.6 cm), with drain guards included
-
18-gauge stainless steel sink body with a backsplash returned 2 inches at the top
-
Two 1-1/8 inch faucet holes on 8 inch centers in the backsplash
-
18 inch drain board on each side of the bowls, for a 72 inch overall width
-
Shipped with its 16-gauge galvanized legs removed for attachment on site
-
Also offered with center drains as item 43782; optional leg brace 31485 and knockdown drain board 23326 available
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Two compartment pot sink with two 18 x 21 inch bowls, each 14 inches deep
Corner drain in each bowl, 1.8 inches (4.6 cm), with drain guards included
18-gauge stainless steel sink body with a backsplash returned 2 inches at the top
Two 1-1/8 inch faucet holes on 8 inch centers in the backsplash
18 inch drain board on each side of the bowls, for a 72 inch overall width
The Omcan 25269 2 Compartment Sink
This Omcan two compartment pot sink has two 18 x 21 inch bowls, each 14 inches deep, with a corner drain and a drain guard for each bowl. An 18 inch drain board on each side of the bowls brings the overall width to 72 inches, and the sink stands 44 inches tall overall. The sink is 18-gauge stainless steel, shipped with its 16-gauge galvanized legs removed for attachment on site.
Two 18 by 21 Inch Bowls, 14 Inches Deep
Each bowl measures 18 inches side to side and 21 inches front to back and is 14 inches deep, with a 2 inch partition between the bowls. There are 3/4 inch radii where the deck rolls into the bowls and at the bowl bottom corners.
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The top of the backsplash is 9-3/4 inches above the underside of the 2-1/2 inch deck edge, and the backsplash is returned 2 inches at the top. The legs are 16-gauge galvanized steel.
Corner Drains with Included Drain Guards
Each bowl has a 1.8 inch (4.6 cm) drain in its corner, and the sink comes with drain guards; each guard is a perforated piece that stands in the bowl corner over the drain. A center drain version of this layout is offered as item 43782. Two 1-1/8 inch faucet holes are punched on 8 inch centers in the backsplash, with their centerline 39 inches above the floor.
Drain Boards on Both Sides of the Bowls
An 18 inch drain board sits on each side of the two bowls, for an overall footprint of 72 inches wide by 26-1/2 inches deep. The same bowls without a drain board, with a left drain board or with a right drain board are items 25266, 25267 and 25268, and a removable knockdown drain board for 18 x 21 inch tub sinks is offered as item 23326.
Knockdown Design with Galvanized Legs
The sink ships with its 16-gauge galvanized legs removed. At installation the legs fit into sockets under the sink and are secured with fasteners, then the drain, the corner drain guard and a standpipe are fitted. The legs sit 31-1/2 inches apart across the front and 16-1/2 inches front to back, and they end in bullet feet. An optional leg brace for 18 x 21 inch two tub sinks is item 31485, and splash-mounted faucets (items 39256, 23516, 47819 and 22289), pre-rinse assemblies (22123 and 22124) and left and right splash guards (47731 and 47732) are offered as related accessories.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with two 18 x 21 inch bowls, each 14 inches deep
-
Corner drain in each bowl, 1.8 inches (4.6 cm), with drain guards included
-
18-gauge stainless steel sink body with a backsplash returned 2 inches at the top
-
Two 1-1/8 inch faucet holes on 8 inch centers in the backsplash
-
18 inch drain board on each side of the bowls, for a 72 inch overall width
-
Shipped with its 16-gauge galvanized legs removed for attachment on site
-
Also offered with center drains as item 43782; optional leg brace 31485 and knockdown drain board 23326 available
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 2 |
| Bowl Size | 18 x 21 in (457 x 533 mm) |
| Bowl Depth | 14 in (356 mm) |
| Bowl Radius | 3/4 in |
| Bowl Partition Width | 2 in |
| Drain Location | Corner |
| Drain Size | 1.8 in (4.6 cm) |
| Drain Guards | Included |
| Faucet Holes | 2 |
| Faucet Hole Spacing | 8 in centers |
| Faucet Hole Diameter | 1-1/8 in |
| Backsplash Height, Deck Edge Underside to Top | 9-3/4 in |
| Deck Edge Depth | 2-1/2 in |
| Drain Board | Left and right, 18 in long each |
| Material | 18-gauge stainless steel |
| Legs | 16-gauge galvanized steel |
| Leg Spacing | 31-1/2 x 16-1/2 in |
| Assembly | Shipped with legs removed |
| Overall Width | 72 in (1829 mm) |
| Overall Depth | 26-1/2 in (673 mm) |
| Overall Height | 44 in (1118 mm) |
| Weight | 95 lb (43 kg) |
| Center Drain Version | Item 43782 |
| Optional Leg Brace | Item 31485 |
| Optional Drain Board | Item 23326 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Two compartment pot sink with two 18 x 21 inch bowls, each 14 inches deep