Skip to content
Request Quote Check Order Status Financing About Us Contact Us

Omcan 25272 75 In. Three Compartment Pot Sink, 18 x 21 x 14 In. Bowls, Corner Drains, Right Drain Board

SKU25272 BrandOmcan
Omcan 25272 75 In. Three Compartment Pot Sink, 18 x 21 x 14 In. Bowls, Corner Drains, Right Drain Board

The Omcan 25272 3 Compartment Sink

This Omcan three compartment pot sink sets up a wash, rinse, and sanitize line with three 18 x 21 inch bowls that are 14 inches deep. A 18 inch wide drain board sits on the right end, and the whole unit runs 74-1/2 inches wide by 26-1/2 inches front to back, so measure your wall run before ordering. The sink is 18-gauge stainless steel and ships with its 16-gauge galvanized legs removed for installation on site.

Three 18 by 21 Inch Bowls, 14 Inches Deep

Each bowl measures 18 inches wide by 21 inches front to back and is 14 inches deep, with the drain opening in one corner. There is a 3/4 inch radius at the bowl corners and a 2 inch partition between neighboring bowls.

18-Gauge Stainless Steel Construction

The sink is 18-gauge stainless steel. A backsplash runs the full width of the top and carries the faucet holes, and the legs are 16-gauge galvanized steel.

Corner Drains with Included Drain Guards

Each bowl drains through a 1.8 inch (4.6 cm) corner opening, and drain guards come with the sink. Two 1-1/8 inch faucet holes are punched in the backsplash, 8 inches apart. Splash-mounted 10 inch and 12 inch spout faucets (items 39256 and 23516) and pre-rinse assemblies (items 22123 and 22124) are available as related accessories for this sink.

Right Drain Board

The drain board on the right end is 18 inches wide, matching the bowl width, and brings the overall length to 74-1/2 inches. A removable 18 x 21 inch stainless steel knockdown drain board (item 23326) and left and right stainless steel splash guards for 18 x 21 inch pot sinks (items 47731 and 47732) are also available as related accessories.

Knockdown Legs

The sink ships with its 16-gauge galvanized legs removed. Installation starts with the legs fitting to the underside of the sink body, followed by the drain fitting and the drain guard. An optional leg brace for 18 x 21 inch three tub sinks is item 31486.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. Three compartment pot sink for wash, rinse, and sanitize use, with 18 x 21 inch bowls 14 inches deep
  2. Corner drain opening in each bowl, with drain guards included
  3. Two 1-1/8 inch faucet holes in the backsplash, 8 inches apart
  4. 18 inch wide drain board on the right end
  5. 18-gauge stainless steel sink with 16-gauge galvanized legs
  6. Ships with the legs removed for installation on site
  7. Optional leg brace (item 31486) and drain board (item 23326) available, plus splash guards, faucets, and pre-rinse assemblies

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,152.69
  • Three compartment pot sink for wash, rinse, and sanitize use, with 18 x 21 inch bowls 14 inches deep
  • Corner drain opening in each bowl, with drain guards included
  • Two 1-1/8 inch faucet holes in the backsplash, 8 inches apart
  • 18 inch wide drain board on the right end
  • 18-gauge stainless steel sink with 16-gauge galvanized legs
    • See full feature list

    The Omcan 25272 3 Compartment Sink

    This Omcan three compartment pot sink sets up a wash, rinse, and sanitize line with three 18 x 21 inch bowls that are 14 inches deep. A 18 inch wide drain board sits on the right end, and the whole unit runs 74-1/2 inches wide by 26-1/2 inches front to back, so measure your wall run before ordering. The sink is 18-gauge stainless steel and ships with its 16-gauge galvanized legs removed for installation on site.

    Three 18 by 21 Inch Bowls, 14 Inches Deep

    Each bowl measures 18 inches wide by 21 inches front to back and is 14 inches deep, with the drain opening in one corner. There is a 3/4 inch radius at the bowl corners and a 2 inch partition between neighboring bowls.

    18-Gauge Stainless Steel Construction

    The sink is 18-gauge stainless steel. A backsplash runs the full width of the top and carries the faucet holes, and the legs are 16-gauge galvanized steel.

    Corner Drains with Included Drain Guards

    Each bowl drains through a 1.8 inch (4.6 cm) corner opening, and drain guards come with the sink. Two 1-1/8 inch faucet holes are punched in the backsplash, 8 inches apart. Splash-mounted 10 inch and 12 inch spout faucets (items 39256 and 23516) and pre-rinse assemblies (items 22123 and 22124) are available as related accessories for this sink.

    Right Drain Board

    The drain board on the right end is 18 inches wide, matching the bowl width, and brings the overall length to 74-1/2 inches. A removable 18 x 21 inch stainless steel knockdown drain board (item 23326) and left and right stainless steel splash guards for 18 x 21 inch pot sinks (items 47731 and 47732) are also available as related accessories.

    Knockdown Legs

    The sink ships with its 16-gauge galvanized legs removed. Installation starts with the legs fitting to the underside of the sink body, followed by the drain fitting and the drain guard. An optional leg brace for 18 x 21 inch three tub sinks is item 31486.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. Three compartment pot sink for wash, rinse, and sanitize use, with 18 x 21 inch bowls 14 inches deep
    2. Corner drain opening in each bowl, with drain guards included
    3. Two 1-1/8 inch faucet holes in the backsplash, 8 inches apart
    4. 18 inch wide drain board on the right end
    5. 18-gauge stainless steel sink with 16-gauge galvanized legs
    6. Ships with the legs removed for installation on site
    7. Optional leg brace (item 31486) and drain board (item 23326) available, plus splash guards, faucets, and pre-rinse assemblies

    Resources & Downloads

    See all from Omcan

    Specifications

    Number of Compartments3
    Bowl Size18 x 21 in
    Bowl Depth14 in
    Bowl Corner Radius3/4 in
    Partition Between Bowls2 in
    Drain LocationCorner
    Drain Size1.8 in (4.6 cm)
    Drain GuardsIncluded
    Faucet Holes2
    Faucet Hole Diameter1-1/8 in
    Faucet Hole Spacing8 in
    Drain BoardRight, 18 in wide
    Material18-gauge stainless steel
    Legs16-gauge galvanized steel
    AssemblyShipped with legs removed
    Overall Width74-1/2 in
    Overall Depth26-1/2 in
    Overall Height44 in
    Weight112 lb
    Optional Leg BraceItem 31486
    Optional Drain BoardItem 23326

    Manufacturer's Warranty

    • 6 Month

      Warranty

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 25272 3 Compartment Sink

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. Three compartment pot sink for wash, rinse, and sanitize use, with 18 x 21 inch bowls 14 inches deep
    2. Corner drain opening in each bowl, with drain guards included
    3. Two 1-1/8 inch faucet holes in the backsplash, 8 inches apart
    4. 18 inch wide drain board on the right end
    5. 18-gauge stainless steel sink with 16-gauge galvanized legs
    6. Ships with the legs removed for installation on site
    7. Optional leg brace (item 31486) and drain board (item 23326) available, plus splash guards, faucets, and pre-rinse assemblies

    See all from Omcan

    Specifications

    Number of Compartments3
    Bowl Size18 x 21 in
    Bowl Depth14 in
    Bowl Corner Radius3/4 in
    Partition Between Bowls2 in
    Drain LocationCorner
    Drain Size1.8 in (4.6 cm)
    Drain GuardsIncluded
    Faucet Holes2
    Faucet Hole Diameter1-1/8 in
    Faucet Hole Spacing8 in
    Drain BoardRight, 18 in wide
    Material18-gauge stainless steel
    Legs16-gauge galvanized steel
    AssemblyShipped with legs removed
    Overall Width74-1/2 in
    Overall Depth26-1/2 in
    Overall Height44 in
    Weight112 lb
    Optional Leg BraceItem 31486
    Optional Drain BoardItem 23326

    Manufacturer's Warranty

      1/2 year

      Warranty

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch