The Omcan 28643 Work Table
This Omcan cabinet base work table gives a prep line 60 inches of 430 stainless steel work surface with an enclosed cabinet underneath for storing kitchen equipment and other products. Omcan lists it for food preparation in a busy commercial kitchen. The top measures 60 inches wide by 30 inches deep, carries a 4 inch by 1 inch backsplash along the back edge, and stands 38 inches tall at the top of the splash, so measure your wall run before ordering. The table is a knock-down design that ships on a pallet and assembles on site with set screws.
Enclosed Cabinet Base with Sliding Doors
The base is an enclosed cabinet closed in by a back panel and left and right side panels, with a stainless steel undershelf inside and two sliding doors across the front. The doors ride on slide rails and have recessed handles, so the front of the cabinet stays flat. Omcan lists a replacement clip and bracket for the cabinet as item 69758.
18-Gauge 430 Stainless Steel Construction
Omcan builds this table in 18 gauge 430 stainless steel throughout. The top, legs and undershelf are all stainless steel, and the table is designed and finished for commercial use, so Omcan notes that minor surface marks such as dimples, scratches and scuffs are normal on a product of this kind.
4-Inch Backsplash and Flush Edge
The 4 inch by 1 inch backsplash runs along the back of the top. This is the flush edge version of the table; Omcan offers the same 60 inch cabinet table with backsplash in an overhang edge version as item 24404, and the same flush edge table without a backsplash as item 28640.
Knock-Down Design Assembled on Site
The table arrives knocked down with four 34 inch stainless steel legs, the top, two sides, a back, the undershelf with its aluminum die cast clamp, two sliding doors and 36 set screws. The back and sides fasten to the top with set screws, the legs and undershelf assembly insert into gussets, and the doors drop onto the slide rails once the table is upright. Omcan's manual calls for filling the set screws with an approved silicone sealer, which is not included. The legs finish in stainless steel bullet feet, and Omcan lists a replacement foot as item AC015 and an optional 5 inch caster with brake as item 14395.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Enclosed cabinet work table for food preparation in a busy commercial kitchen, with a 60 inch by 30 inch top
-
Cabinet is closed in by back and side panels with a stainless steel undershelf inside for storing kitchen equipment and other products
-
Two sliding doors on slide rails with recessed handles across the front of the cabinet
-
18 gauge 430 stainless steel construction throughout
-
4 inch by 1 inch backsplash along the back of the top
-
Flush edge version; Omcan also lists an overhang edge version of this size as item 24404
-
Four 34 inch stainless steel legs with stainless steel bullet feet; optional 5 inch caster with brake available as item 14395
-
Knock-down design that assembles on site with 36 set screws, which Omcan says to fill with an approved silicone sealer (not included)
-
Replacement foot (item AC015) and replacement cabinet clip and bracket (item 69758) available from Omcan
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Enclosed cabinet work table for food preparation in a busy commercial kitchen, with a 60 inch by 30 inch top
Cabinet is closed in by back and side panels with a stainless steel undershelf inside for storing kitchen equipment and other products
Two sliding doors on slide rails with recessed handles across the front of the cabinet
18 gauge 430 stainless steel construction throughout
4 inch by 1 inch backsplash along the back of the top
The Omcan 28643 Work Table
This Omcan cabinet base work table gives a prep line 60 inches of 430 stainless steel work surface with an enclosed cabinet underneath for storing kitchen equipment and other products. Omcan lists it for food preparation in a busy commercial kitchen. The top measures 60 inches wide by 30 inches deep, carries a 4 inch by 1 inch backsplash along the back edge, and stands 38 inches tall at the top of the splash, so measure your wall run before ordering. The table is a knock-down design that ships on a pallet and assembles on site with set screws.
Enclosed Cabinet Base with Sliding Doors
The base is an enclosed cabinet closed in by a back panel and left and right side panels, with a stainless steel undershelf inside and two sliding doors across the front. The doors ride on slide rails and have recessed handles, so the front of the cabinet stays flat. Omcan lists a replacement clip and bracket for the cabinet as item 69758.
18-Gauge 430 Stainless Steel Construction
Omcan builds this table in 18 gauge 430 stainless steel throughout. The top, legs and undershelf are all stainless steel, and the table is designed and finished for commercial use, so Omcan notes that minor surface marks such as dimples, scratches and scuffs are normal on a product of this kind.
4-Inch Backsplash and Flush Edge
The 4 inch by 1 inch backsplash runs along the back of the top. This is the flush edge version of the table; Omcan offers the same 60 inch cabinet table with backsplash in an overhang edge version as item 24404, and the same flush edge table without a backsplash as item 28640.
Knock-Down Design Assembled on Site
The table arrives knocked down with four 34 inch stainless steel legs, the top, two sides, a back, the undershelf with its aluminum die cast clamp, two sliding doors and 36 set screws. The back and sides fasten to the top with set screws, the legs and undershelf assembly insert into gussets, and the doors drop onto the slide rails once the table is upright. Omcan's manual calls for filling the set screws with an approved silicone sealer, which is not included. The legs finish in stainless steel bullet feet, and Omcan lists a replacement foot as item AC015 and an optional 5 inch caster with brake as item 14395.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Enclosed cabinet work table for food preparation in a busy commercial kitchen, with a 60 inch by 30 inch top
-
Cabinet is closed in by back and side panels with a stainless steel undershelf inside for storing kitchen equipment and other products
-
Two sliding doors on slide rails with recessed handles across the front of the cabinet
-
18 gauge 430 stainless steel construction throughout
-
4 inch by 1 inch backsplash along the back of the top
-
Flush edge version; Omcan also lists an overhang edge version of this size as item 24404
-
Four 34 inch stainless steel legs with stainless steel bullet feet; optional 5 inch caster with brake available as item 14395
-
Knock-down design that assembles on site with 36 set screws, which Omcan says to fill with an approved silicone sealer (not included)
-
Replacement foot (item AC015) and replacement cabinet clip and bracket (item 69758) available from Omcan
Resources & Downloads
See all from Omcan
Specifications
| Top Size (D x W) | 30 x 60 in / 762 x 1524.0 mm |
| Overall Width | 60 in |
| Overall Depth | 30 in |
| Overall Height (to Top of Backsplash) | 38 in / 965.2 mm |
| Height Without Backsplash | 34 in |
| Backsplash | 4 x 1 in |
| Edge Style | Flush |
| Material | 430 stainless steel |
| Gauge | 18 gauge |
| Base | Enclosed cabinet with undershelf |
| Doors | 2 sliding, recessed handles |
| Legs | 4 stainless steel, 34 in |
| Feet | Stainless steel bullet feet |
| Assembly | Knock-down, 36 set screws |
| Optional Caster | Item 14395, 5 in with brake |
| Replacement Foot | Item AC015 |
| Replacement Clip/Bracket | Item 69758 |
| Overhang Edge Version | Item 24404 |
| Flush Edge Version Without Backsplash | Item 28640 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Enclosed cabinet work table for food preparation in a busy commercial kitchen, with a 60 inch by 30 inch top