The Omcan 38031 Dish Cabinet
This Omcan dish cabinet gives you 72 inches of enclosed stainless steel storage for clean dishes, a convenient solution for a busy kitchen. Three storage levels carry the load: a flat top rated for 410 pounds, a fixed mid shelf rated for 210 pounds, and a cabinet bottom rated for another 390 pounds. The back and both ends are closed walls and the front is open. The cabinet stands 36 inches tall on a 15 inch deep base, so measure your wall run against the 72 inch width, and the 1-5/8 x 6 inch stainless steel legs fit sockets under the body.
Flat Top Rated for 410 Pounds
The top is a flat, open shelf at 36 inches overall height, with the cabinet body itself 30 inches tall. The top shelf is rated for 410 pounds, and a centered hat channel runs on each shelf.
Three Storage Levels in One Footprint
Below the top, the mid shelf is rated for 210 pounds and the full-width cabinet bottom for 390 pounds. The mid shelf splits the 30 inch body into two bays of 12-3/4 inches each. The middle shelf is not adjustable, so plan your tallest stacks for the two bays as built.
18-Gauge Type 304 Stainless Steel
Top, walls, bottom, and hat channel are all 18-gauge type 304 stainless steel, which is the material for the whole cabinet line.
Closed Back and Ends with an Open Front
The back and both end walls are solid panels and the front has no doors, so stored ware loads straight into the two bays. Omcan makes this cabinet line in 15 and 18 inch depths and in 36, 48, 60, 72 and 84 inch widths; this is the 15 inch deep, 72 inch wide size, and the same width also comes in the 18 inch depth.
6-Inch Stainless Steel Legs with Bullet Feet
The body rides on 1-5/8 inch diameter stainless steel legs, 6 inches tall, that seat in sockets under the cabinet and finish in stainless steel bullet feet. The legs sit 67 inches apart across the width and 11 inches apart front to back. If the cabinet needs to move between stations, casters for Omcan's dish cabinets and worktable cabinets are available as related accessories: item 46585 with a brake and item 46586 without. A replacement stainless steel foot is sold separately as item AC015.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Enclosed stainless steel storage for clean dishes in a busy kitchen
-
Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating
-
Closed back and end walls with an open front for loading
-
18-gauge type 304 stainless steel top, walls, bottom, and hat channel
-
Centered channel on each shelf
-
Fixed mid shelf that is not adjustable, splitting the interior into two bays
-
1-5/8 x 6 inch stainless steel legs that seat in sockets and finish in bullet feet
-
Part of a line offered in 15 and 18 inch depths and 36 to 84 inch widths
-
Optional casters for this cabinet line, item 46585 with brake and item 46586 without, sold separately
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Enclosed stainless steel storage for clean dishes in a busy kitchen
Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating
Closed back and end walls with an open front for loading
18-gauge type 304 stainless steel top, walls, bottom, and hat channel
Centered channel on each shelf
The Omcan 38031 Dish Cabinet
This Omcan dish cabinet gives you 72 inches of enclosed stainless steel storage for clean dishes, a convenient solution for a busy kitchen. Three storage levels carry the load: a flat top rated for 410 pounds, a fixed mid shelf rated for 210 pounds, and a cabinet bottom rated for another 390 pounds. The back and both ends are closed walls and the front is open. The cabinet stands 36 inches tall on a 15 inch deep base, so measure your wall run against the 72 inch width, and the 1-5/8 x 6 inch stainless steel legs fit sockets under the body.
Flat Top Rated for 410 Pounds
The top is a flat, open shelf at 36 inches overall height, with the cabinet body itself 30 inches tall. The top shelf is rated for 410 pounds, and a centered hat channel runs on each shelf.
Three Storage Levels in One Footprint
Below the top, the mid shelf is rated for 210 pounds and the full-width cabinet bottom for 390 pounds. The mid shelf splits the 30 inch body into two bays of 12-3/4 inches each. The middle shelf is not adjustable, so plan your tallest stacks for the two bays as built.
18-Gauge Type 304 Stainless Steel
Top, walls, bottom, and hat channel are all 18-gauge type 304 stainless steel, which is the material for the whole cabinet line.
Closed Back and Ends with an Open Front
The back and both end walls are solid panels and the front has no doors, so stored ware loads straight into the two bays. Omcan makes this cabinet line in 15 and 18 inch depths and in 36, 48, 60, 72 and 84 inch widths; this is the 15 inch deep, 72 inch wide size, and the same width also comes in the 18 inch depth.
6-Inch Stainless Steel Legs with Bullet Feet
The body rides on 1-5/8 inch diameter stainless steel legs, 6 inches tall, that seat in sockets under the cabinet and finish in stainless steel bullet feet. The legs sit 67 inches apart across the width and 11 inches apart front to back. If the cabinet needs to move between stations, casters for Omcan's dish cabinets and worktable cabinets are available as related accessories: item 46585 with a brake and item 46586 without. A replacement stainless steel foot is sold separately as item AC015.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Enclosed stainless steel storage for clean dishes in a busy kitchen
-
Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating
-
Closed back and end walls with an open front for loading
-
18-gauge type 304 stainless steel top, walls, bottom, and hat channel
-
Centered channel on each shelf
-
Fixed mid shelf that is not adjustable, splitting the interior into two bays
-
1-5/8 x 6 inch stainless steel legs that seat in sockets and finish in bullet feet
-
Part of a line offered in 15 and 18 inch depths and 36 to 84 inch widths
-
Optional casters for this cabinet line, item 46585 with brake and item 46586 without, sold separately
Resources & Downloads
See all from Omcan
Specifications
| Overall Width | 72 in |
| Overall Depth | 15 in |
| Overall Height | 36 in |
| Top Size | 72 x 15 in |
| Top Shelf Capacity | 410 lb |
| Mid Shelf Capacity | 210 lb |
| Undershelf Capacity | 390 lb |
| Storage Levels | 3 |
| Mid Shelf | Fixed, not adjustable |
| Bay Height, Each | 12-3/4 in |
| Body Height | 30 in |
| Material | 18-gauge type 304 stainless steel |
| 304 Stainless Steel Parts | Top, walls, bottom, and hat channel |
| Shelf Channel | Centered channel on each shelf |
| Leg Height | 6 in |
| Leg Diameter | 1-5/8 in |
| Legs | Stainless steel, socket mounted |
| Feet | Stainless steel bullet feet |
| Leg Spacing, Width | 67 in |
| Leg Spacing, Depth | 11 in |
| Weight | 108 lb |
| Optional Casters | Items 46585, 46586 |
| Replacement Foot | Item AC015 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Enclosed stainless steel storage for clean dishes in a busy kitchen