Omcan 38032 18 x 48 In. Dish Cabinet, 18-Gauge 304 Stainless Steel, Fixed Mid Shelf

SKU38032 BrandOmcan

The Omcan 38032 Dish Cabinet

This Omcan dish cabinet gives you 48 inches of enclosed stainless steel storage for clean dishes, a convenient solution for a busy kitchen. Three storage levels carry the load: a flat top rated for 400 pounds, a fixed mid shelf rated for 205 pounds, and a cabinet bottom rated for another 370 pounds. The back and both ends are closed walls and the front is open. The cabinet stands 36 inches tall on a 18 inch deep base, so measure your wall run against the 48 inch width, and the 1-5/8 x 6 inch stainless steel legs fit sockets under the body.

Flat Top Rated for 400 Pounds

The top is a flat, open shelf at 36 inches overall height, with the cabinet body itself 30 inches tall. The top shelf is rated for 400 pounds, and a centered hat channel runs on each shelf.

Three Storage Levels in One Footprint

Below the top, the mid shelf is rated for 205 pounds and the full-width cabinet bottom for 370 pounds. The mid shelf splits the 30 inch body into two bays of 12-3/4 inches each. The middle shelf is not adjustable, so plan your tallest stacks for the two bays as built.

18-Gauge Type 304 Stainless Steel

Top, walls, bottom, and hat channel are all 18-gauge type 304 stainless steel, which is the material for the whole cabinet line.

Closed Back and Ends with an Open Front

The back and both end walls are solid panels and the front has no doors, so stored ware loads straight into the two bays. Omcan makes this cabinet line in 15 and 18 inch depths and in 36, 48, 60, 72 and 84 inch widths; this is the 18 inch deep, 48 inch wide size, and the same width also comes in the 15 inch depth.

6-Inch Stainless Steel Legs with Bullet Feet

The body rides on 1-5/8 inch diameter stainless steel legs, 6 inches tall, that seat in sockets under the cabinet and finish in stainless steel bullet feet. The legs sit 43 inches apart across the width and 14 inches apart front to back. If the cabinet needs to move between stations, casters for Omcan's dish cabinets and worktable cabinets are available as related accessories: item 46585 with a brake and item 46586 without. A replacement stainless steel foot is sold separately as item AC015.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Enclosed stainless steel storage for clean dishes in a busy kitchen
Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating
Closed back and end walls with an open front for loading
18-gauge type 304 stainless steel top, walls, bottom, and hat channel
Centered channel on each shelf
Fixed mid shelf that is not adjustable, splitting the interior into two bays
1-5/8 x 6 inch stainless steel legs that seat in sockets and finish in bullet feet
Part of a line offered in 15 and 18 inch depths and 36 to 84 inch widths
Optional casters for this cabinet line, item 46585 with brake and item 46586 without, sold separately

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,076.53

Enclosed stainless steel storage for clean dishes in a busy kitchen

Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating

Closed back and end walls with an open front for loading

18-gauge type 304 stainless steel top, walls, bottom, and hat channel

Centered channel on each shelf

See full feature list

The Omcan 38032 Dish Cabinet

This Omcan dish cabinet gives you 48 inches of enclosed stainless steel storage for clean dishes, a convenient solution for a busy kitchen. Three storage levels carry the load: a flat top rated for 400 pounds, a fixed mid shelf rated for 205 pounds, and a cabinet bottom rated for another 370 pounds. The back and both ends are closed walls and the front is open. The cabinet stands 36 inches tall on a 18 inch deep base, so measure your wall run against the 48 inch width, and the 1-5/8 x 6 inch stainless steel legs fit sockets under the body.

Flat Top Rated for 400 Pounds

The top is a flat, open shelf at 36 inches overall height, with the cabinet body itself 30 inches tall. The top shelf is rated for 400 pounds, and a centered hat channel runs on each shelf.

Three Storage Levels in One Footprint

Below the top, the mid shelf is rated for 205 pounds and the full-width cabinet bottom for 370 pounds. The mid shelf splits the 30 inch body into two bays of 12-3/4 inches each. The middle shelf is not adjustable, so plan your tallest stacks for the two bays as built.

18-Gauge Type 304 Stainless Steel

Top, walls, bottom, and hat channel are all 18-gauge type 304 stainless steel, which is the material for the whole cabinet line.

Closed Back and Ends with an Open Front

The back and both end walls are solid panels and the front has no doors, so stored ware loads straight into the two bays. Omcan makes this cabinet line in 15 and 18 inch depths and in 36, 48, 60, 72 and 84 inch widths; this is the 18 inch deep, 48 inch wide size, and the same width also comes in the 15 inch depth.

6-Inch Stainless Steel Legs with Bullet Feet

The body rides on 1-5/8 inch diameter stainless steel legs, 6 inches tall, that seat in sockets under the cabinet and finish in stainless steel bullet feet. The legs sit 43 inches apart across the width and 14 inches apart front to back. If the cabinet needs to move between stations, casters for Omcan's dish cabinets and worktable cabinets are available as related accessories: item 46585 with a brake and item 46586 without. A replacement stainless steel foot is sold separately as item AC015.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Enclosed stainless steel storage for clean dishes in a busy kitchen
Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating
Closed back and end walls with an open front for loading
18-gauge type 304 stainless steel top, walls, bottom, and hat channel
Centered channel on each shelf
Fixed mid shelf that is not adjustable, splitting the interior into two bays
1-5/8 x 6 inch stainless steel legs that seat in sockets and finish in bullet feet
Part of a line offered in 15 and 18 inch depths and 36 to 84 inch widths
Optional casters for this cabinet line, item 46585 with brake and item 46586 without, sold separately

Resources & Downloads

Omcan 38032 Specsheet

See all from Omcan

Specifications

Overall Width	48 in
Overall Depth	18 in
Overall Height	36 in
Top Size	48 x 18 in
Top Shelf Capacity	400 lb
Mid Shelf Capacity	205 lb
Undershelf Capacity	370 lb
Storage Levels	3
Mid Shelf	Fixed, not adjustable
Bay Height, Each	12-3/4 in
Body Height	30 in
Material	18-gauge type 304 stainless steel
304 Stainless Steel Parts	Top, walls, bottom, and hat channel
Shelf Channel	Centered channel on each shelf
Leg Height	6 in
Leg Diameter	1-5/8 in
Legs	Stainless steel, socket mounted
Feet	Stainless steel bullet feet
Leg Spacing, Width	43 in
Leg Spacing, Depth	14 in
Weight	93 lb
Optional Casters	Items 46585, 46586
Replacement Foot	Item AC015

Manufacturer's Warranty

6 Month

Warranty

Certifications & Approvals

NSF Approved

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 38032 Dish Cabinet

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Enclosed stainless steel storage for clean dishes in a busy kitchen
Three storage levels, the flat top, a mid shelf, and a full-width cabinet bottom, each with its own load rating
Closed back and end walls with an open front for loading
18-gauge type 304 stainless steel top, walls, bottom, and hat channel
Centered channel on each shelf
Fixed mid shelf that is not adjustable, splitting the interior into two bays
1-5/8 x 6 inch stainless steel legs that seat in sockets and finish in bullet feet
Part of a line offered in 15 and 18 inch depths and 36 to 84 inch widths
Optional casters for this cabinet line, item 46585 with brake and item 46586 without, sold separately

See all from Omcan

Specifications

Overall Width	48 in
Overall Depth	18 in
Overall Height	36 in
Top Size	48 x 18 in
Top Shelf Capacity	400 lb
Mid Shelf Capacity	205 lb
Undershelf Capacity	370 lb
Storage Levels	3
Mid Shelf	Fixed, not adjustable
Bay Height, Each	12-3/4 in
Body Height	30 in
Material	18-gauge type 304 stainless steel
304 Stainless Steel Parts	Top, walls, bottom, and hat channel
Shelf Channel	Centered channel on each shelf
Leg Height	6 in
Leg Diameter	1-5/8 in
Legs	Stainless steel, socket mounted
Feet	Stainless steel bullet feet
Leg Spacing, Width	43 in
Leg Spacing, Depth	14 in
Weight	93 lb
Optional Casters	Items 46585, 46586
Replacement Foot	Item AC015

Manufacturer's Warranty

1/2 year

Warranty