The Omcan 39786 Drop-In Sink
This Omcan drop-in sink adds a single wash-up bowl to a counter, prep table, or service station. The bowl measures 10 x 14 inches and runs a full 10 inches deep, and a 6 inch splash wraps the back and both sides so the sink can sit against a wall. The rim spans 13 inches wide by 19 inches front to back, so check that footprint against your counter run before cutting the opening. The sink sets into the cutout from above, with mounting clips under the rim, and the bowl drains through a 3-1/2 inch drain basket.
One 10 by 14 Inch Bowl, 10 Inches Deep
The single bowl gives a counter or prep table its own wash point. With a 10 inch deep bowl, allow 10 inches below the counter for the bowl; the splash above the rim brings the overall height to 16 inches.
6-Inch Splash on the Back and Both Sides
A 6 inch splash wraps three sides of the bowl, left, back, and right, so you can set this sink against a wall or into a corner. The side splashes taper down toward the front, and the front edge of the rim stays flat.
16-Gauge Type 304 Stainless Steel Top with 18-Gauge Bowl
The top is formed from 16-gauge type 304 stainless steel with an 18-gauge type 304 bowl below it. The 16-gauge top is the thicker of the two sheets.
3-1/2 Inch Drain Basket and Matching Faucet
The bowl comes with a 3-1/2 inch drain basket. Omcan lists a deck mounted sink faucet with a 9 inch gooseneck spout, item 39788, as the accessory faucet for its drop-in sinks.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
One compartment drop-in sink for counters, prep tables, and service stations
-
Sets into a counter cutout from above, with mounting clips under the rim
-
6 inch splash on the back and both sides for installation against a wall or in a corner
-
Side splashes taper down toward the flat front edge
-
3-1/2 inch drain basket in the bowl
-
16-gauge type 304 stainless steel top over an 18-gauge type 304 bowl
-
Deck mounted faucet with 9 inch gooseneck spout available separately as item 39788
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
The Omcan 39786 Drop-In Sink
This Omcan drop-in sink adds a single wash-up bowl to a counter, prep table, or service station. The bowl measures 10 x 14 inches and runs a full 10 inches deep, and a 6 inch splash wraps the back and both sides so the sink can sit against a wall. The rim spans 13 inches wide by 19 inches front to back, so check that footprint against your counter run before cutting the opening. The sink sets into the cutout from above, with mounting clips under the rim, and the bowl drains through a 3-1/2 inch drain basket.
One 10 by 14 Inch Bowl, 10 Inches Deep
The single bowl gives a counter or prep table its own wash point. With a 10 inch deep bowl, allow 10 inches below the counter for the bowl; the splash above the rim brings the overall height to 16 inches.
6-Inch Splash on the Back and Both Sides
A 6 inch splash wraps three sides of the bowl, left, back, and right, so you can set this sink against a wall or into a corner. The side splashes taper down toward the front, and the front edge of the rim stays flat.
16-Gauge Type 304 Stainless Steel Top with 18-Gauge Bowl
The top is formed from 16-gauge type 304 stainless steel with an 18-gauge type 304 bowl below it. The 16-gauge top is the thicker of the two sheets.
3-1/2 Inch Drain Basket and Matching Faucet
The bowl comes with a 3-1/2 inch drain basket. Omcan lists a deck mounted sink faucet with a 9 inch gooseneck spout, item 39788, as the accessory faucet for its drop-in sinks.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
One compartment drop-in sink for counters, prep tables, and service stations
-
Sets into a counter cutout from above, with mounting clips under the rim
-
6 inch splash on the back and both sides for installation against a wall or in a corner
-
Side splashes taper down toward the flat front edge
-
3-1/2 inch drain basket in the bowl
-
16-gauge type 304 stainless steel top over an 18-gauge type 304 bowl
-
Deck mounted faucet with 9 inch gooseneck spout available separately as item 39788
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 1 |
| Bowl Size | 10 x 14 in |
| Bowl Depth | 10 in |
| Mounting | Drop-in |
| Rim Clips | Included |
| Top Style | Splash, three sides |
| Splash | 6 in, left, back, and right |
| Drain Basket Size | 3-1/2 in |
| Drain Basket | Included |
| Top Material | 16-gauge type 304 stainless steel |
| Bowl Material | 18-gauge type 304 stainless steel |
| Overall Width | 13 in |
| Overall Depth | 19 in |
| Overall Height | 16 in |
| Weight | 12.8 lb |
| Matching Faucet | Item 39788, sold separately |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved

