The Omcan 40192 Soiled Dish Table
This Omcan under counter dish table is the right side unit in a family Omcan offers in left and right orientation: the 60 inch top carries a 20 by 20 inch sink bowl at the right end, with an 8 inch backsplash along the back. Overall it measures 62 inches wide by 30 inches deep by 44 inches high to the top of the backsplash, and the work surface is 34 inches off the floor. The left side version is available under item 40191. Confirm the 30 inch depth and the 62 inch run before ordering.
20 by 20 Inch Sink Bowl, 8 Inches Deep
The bowl is 20 by 20 by 8 inches with a 3-1/2 inch diameter drain, and the drain center sits 14-3/4 inches back from the front edge of the top. A drain fitting is included and goes into the bowl during assembly. Two 1-1/8 inch faucet holes are punched in the backsplash on 8 inch centers, with the outer hole 9-1/2 inches from the right end of the table and the hole centers 5 inches above the deck.
18-Gauge Type 304 Polished Stainless Steel
The table is made of 18-gauge type 304 stainless steel with a polished finish. It is designed and finished for use in a commercial environment, so minor surface marks such as dimples, scratches and scuffs are normal on a product of this nature.
8-Inch Backsplash with a 2-Inch Return at 45 Degrees
The 8 inch backsplash runs along the back of the top and finishes with a 2 inch return angled at 45 degrees to minimize spills and splashes.
26-Inch Bullet-Foot Legs with Cross Bracing
The table stands on 26 inch stainless steel legs with bullet feet, tied by cross bracing. The parts supplied are two legs, one cross brace, two leg sockets, eight screws, the top and the drain fitting; the legs fit under the sink end and sit 15-1/2 inches apart front to back. The table ships knocked down and is assembled on site in two steps.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Under counter soiled dish table with the sink bowl at the right end of a 60 inch top; the left side version is item 40191
-
Made of polished 18-gauge type 304 stainless steel
-
8 inch backsplash with a 2 inch return at a 45 degree angle to minimize spills and splashes
-
20 by 20 by 8 inch sink bowl with a 3-1/2 inch diameter drain, drain fitting included
-
Two 1-1/8 inch faucet holes punched in the backsplash on 8 inch centers
-
26 inch stainless steel legs with bullet feet and cross bracing under the sink end
-
Ships knocked down; the two legs, cross brace and drain fitting assemble to the top on site
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Under counter soiled dish table with the sink bowl at the right end of a 60 inch top; the left side version is item 40191
Made of polished 18-gauge type 304 stainless steel
8 inch backsplash with a 2 inch return at a 45 degree angle to minimize spills and splashes
20 by 20 by 8 inch sink bowl with a 3-1/2 inch diameter drain, drain fitting included
Two 1-1/8 inch faucet holes punched in the backsplash on 8 inch centers
The Omcan 40192 Soiled Dish Table
This Omcan under counter dish table is the right side unit in a family Omcan offers in left and right orientation: the 60 inch top carries a 20 by 20 inch sink bowl at the right end, with an 8 inch backsplash along the back. Overall it measures 62 inches wide by 30 inches deep by 44 inches high to the top of the backsplash, and the work surface is 34 inches off the floor. The left side version is available under item 40191. Confirm the 30 inch depth and the 62 inch run before ordering.
20 by 20 Inch Sink Bowl, 8 Inches Deep
The bowl is 20 by 20 by 8 inches with a 3-1/2 inch diameter drain, and the drain center sits 14-3/4 inches back from the front edge of the top. A drain fitting is included and goes into the bowl during assembly. Two 1-1/8 inch faucet holes are punched in the backsplash on 8 inch centers, with the outer hole 9-1/2 inches from the right end of the table and the hole centers 5 inches above the deck.
18-Gauge Type 304 Polished Stainless Steel
The table is made of 18-gauge type 304 stainless steel with a polished finish. It is designed and finished for use in a commercial environment, so minor surface marks such as dimples, scratches and scuffs are normal on a product of this nature.
8-Inch Backsplash with a 2-Inch Return at 45 Degrees
The 8 inch backsplash runs along the back of the top and finishes with a 2 inch return angled at 45 degrees to minimize spills and splashes.
26-Inch Bullet-Foot Legs with Cross Bracing
The table stands on 26 inch stainless steel legs with bullet feet, tied by cross bracing. The parts supplied are two legs, one cross brace, two leg sockets, eight screws, the top and the drain fitting; the legs fit under the sink end and sit 15-1/2 inches apart front to back. The table ships knocked down and is assembled on site in two steps.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Under counter soiled dish table with the sink bowl at the right end of a 60 inch top; the left side version is item 40191
-
Made of polished 18-gauge type 304 stainless steel
-
8 inch backsplash with a 2 inch return at a 45 degree angle to minimize spills and splashes
-
20 by 20 by 8 inch sink bowl with a 3-1/2 inch diameter drain, drain fitting included
-
Two 1-1/8 inch faucet holes punched in the backsplash on 8 inch centers
-
26 inch stainless steel legs with bullet feet and cross bracing under the sink end
-
Ships knocked down; the two legs, cross brace and drain fitting assemble to the top on site
Resources & Downloads
See all from Omcan
Specifications
| Table Type | Under counter soiled dish table |
| Sink Location | Right |
| Overall Width | 62 in |
| Top Length | 60 in |
| Overall Depth | 30 in |
| Overall Height | 44 in |
| Work Surface Height | 34 in |
| Sink Bowl Size | 20 x 20 in |
| Sink Bowl Depth | 8 in |
| Drain Diameter | 3-1/2 in |
| Drain Center from Front Edge | 14-3/4 in |
| Drain Fitting | Included |
| Faucet Holes | 2 |
| Faucet Hole Diameter | 1-1/8 in |
| Faucet Hole Spacing | 8 in centers |
| Faucet Hole Height | 5 in above deck |
| Outer Faucet Hole from Right End | 9-1/2 in |
| Backsplash Height | 8 in |
| Backsplash Return | 2 in at 45° |
| Material | 18-gauge type 304 stainless steel, polished |
| Legs | 2, stainless steel, bullet feet |
| Leg Height | 26 in |
| Leg Spacing, Front to Back | 15-1/2 in |
| Cross Bracing | 1 brace between legs |
| Assembly | Ships knocked down, assembly required |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Under counter soiled dish table with the sink bowl at the right end of a 60 inch top; the left side version is item 40191