Omcan 41279 60 x 30 In. Poly Top Table Frame, 6 In. Backsplash, Stainless Steel Undershelf, Board Sold Separately

SKU41279 BrandOmcan

The Omcan 41279 Work Table Frame

This Omcan poly top table frame with backsplash is the stainless steel half of a 60 by 30 inch poly top table: the tubing frame, an 18 gauge 430 stainless steel undershelf, and a 6 inch 16 gauge 430 stainless steel backsplash across the back edge. The poly board that forms the work surface is sold separately. Omcan describes these as kitchen prep tables for deli shops and any commercial kitchen. The frame top sits 36 inches high and the backsplash brings the overall height to 42 inches, so check both numbers against your wall run and any shelving above it. No cutting board is included with this item number: pair it with the matching 26 x 60 inch poly board, item 43201 in 3/4 inch or item 43202 in 1 inch thickness, to complete the table.

Frame and Undershelf Only, Top Sold Separately

Omcan splits its poly top tables into two components, and this item is the base. The stainless steel frame, undershelf, and backsplash are what you are buying here; the cutting board is its own line item. This backsplash frame takes the 26 x 60 inch boards, item 43201 at 3/4 inch thick (rated 590 pounds on Omcan's sheet) or item 43202 at 1 inch (630 pounds).

Rated for 800 Pounds Total Load

Omcan rates the table at 800 pounds of overall loading capacity, with the undershelf itself rated for 490 lb. The undershelf is 18 gauge 430 stainless steel with aluminum sockets, listed as item 44282.

6 Inch Backsplash in 16 Gauge 430 Stainless Steel

The 6 inch backsplash is 16 gauge 430 stainless steel and runs along the back edge of the frame, taking the overall height to 42 inches. Because it occupies the back of the 30 inch deep frame, the matching poly boards for this version are 26 inches deep, 4 inches shallower than the boards for the frame without a backsplash.

Stainless Steel Tubing Frame with Sockets and Bullet Feet

The frame is stainless steel tubing with stainless steel sockets, drawn on Omcan's sheet as 38 x 38 x 1.2 mm square tube, about 1-1/2 inches square. The legs are stainless steel with stainless steel bullet feet. Per Omcan's manual the table ships as a top frame, an undershelf, and four legs that assemble with the included set screws; the poly board then drops into the frame.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Base frame for building a 60 x 30 inch poly top prep table in a deli or any commercial kitchen
Frame, undershelf, and 6 inch backsplash only, the poly board top is sold separately
Accepts Omcan's matching 26 x 60 inch poly boards, item 43201 in 3/4 inch and item 43202 in 1 inch thickness
6 inch backsplash in 16 gauge 430 stainless steel along the back edge
Stainless steel tubing frame with stainless steel sockets
Stainless steel legs with stainless steel bullet feet
18 gauge 430 stainless steel undershelf with aluminum sockets
Ships as frame, undershelf, and four legs that assemble with the included set screws

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$783.72

Base frame for building a 60 x 30 inch poly top prep table in a deli or any commercial kitchen

Frame, undershelf, and 6 inch backsplash only, the poly board top is sold separately

Accepts Omcan's matching 26 x 60 inch poly boards, item 43201 in 3/4 inch and item 43202 in 1 inch thickness

6 inch backsplash in 16 gauge 430 stainless steel along the back edge

Stainless steel tubing frame with stainless steel sockets

See full feature list

The Omcan 41279 Work Table Frame

This Omcan poly top table frame with backsplash is the stainless steel half of a 60 by 30 inch poly top table: the tubing frame, an 18 gauge 430 stainless steel undershelf, and a 6 inch 16 gauge 430 stainless steel backsplash across the back edge. The poly board that forms the work surface is sold separately. Omcan describes these as kitchen prep tables for deli shops and any commercial kitchen. The frame top sits 36 inches high and the backsplash brings the overall height to 42 inches, so check both numbers against your wall run and any shelving above it. No cutting board is included with this item number: pair it with the matching 26 x 60 inch poly board, item 43201 in 3/4 inch or item 43202 in 1 inch thickness, to complete the table.

Frame and Undershelf Only, Top Sold Separately

Omcan splits its poly top tables into two components, and this item is the base. The stainless steel frame, undershelf, and backsplash are what you are buying here; the cutting board is its own line item. This backsplash frame takes the 26 x 60 inch boards, item 43201 at 3/4 inch thick (rated 590 pounds on Omcan's sheet) or item 43202 at 1 inch (630 pounds).

Rated for 800 Pounds Total Load

Omcan rates the table at 800 pounds of overall loading capacity, with the undershelf itself rated for 490 lb. The undershelf is 18 gauge 430 stainless steel with aluminum sockets, listed as item 44282.

6 Inch Backsplash in 16 Gauge 430 Stainless Steel

The 6 inch backsplash is 16 gauge 430 stainless steel and runs along the back edge of the frame, taking the overall height to 42 inches. Because it occupies the back of the 30 inch deep frame, the matching poly boards for this version are 26 inches deep, 4 inches shallower than the boards for the frame without a backsplash.

Stainless Steel Tubing Frame with Sockets and Bullet Feet

The frame is stainless steel tubing with stainless steel sockets, drawn on Omcan's sheet as 38 x 38 x 1.2 mm square tube, about 1-1/2 inches square. The legs are stainless steel with stainless steel bullet feet. Per Omcan's manual the table ships as a top frame, an undershelf, and four legs that assemble with the included set screws; the poly board then drops into the frame.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Base frame for building a 60 x 30 inch poly top prep table in a deli or any commercial kitchen
Frame, undershelf, and 6 inch backsplash only, the poly board top is sold separately
Accepts Omcan's matching 26 x 60 inch poly boards, item 43201 in 3/4 inch and item 43202 in 1 inch thickness
6 inch backsplash in 16 gauge 430 stainless steel along the back edge
Stainless steel tubing frame with stainless steel sockets
Stainless steel legs with stainless steel bullet feet
18 gauge 430 stainless steel undershelf with aluminum sockets
Ships as frame, undershelf, and four legs that assemble with the included set screws

Resources & Downloads

Omcan 41279 Specsheet

See all from Omcan

Specifications

Overall Width	60 in
Overall Depth	30 in
Frame Height	36 in
Overall Height	42 in
Backsplash Height	6 in
Backsplash Material	16 gauge 430 stainless steel
Top Frame	Stainless steel tubing, stainless steel sockets
Frame Tubing	38 x 38 x 1.2 mm (1-1/2 in square)
Undershelf	18 gauge 430 stainless steel, aluminum sockets
Undershelf Item No.	44282
Legs	Stainless steel with stainless steel bullet feet
Overall Loading Capacity	800 lb
Undershelf Capacity	490 lb (222.3 kg)
Number of Shelves	1
Assembly	Frame, undershelf, and legs assemble with set screws
Board Included	No, sold separately
Required Board Size	26 x 60 in
Compatible Board, 3/4 in Thick	Item 43201, 590 lb capacity
Compatible Board, 1 in Thick	Item 43202, 630 lb capacity
Weight	66 lb

Manufacturer's Warranty

6 Month

Warranty

Certifications & Approvals

NSF Approved

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 41279 Work Table Frame

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Base frame for building a 60 x 30 inch poly top prep table in a deli or any commercial kitchen
Frame, undershelf, and 6 inch backsplash only, the poly board top is sold separately
Accepts Omcan's matching 26 x 60 inch poly boards, item 43201 in 3/4 inch and item 43202 in 1 inch thickness
6 inch backsplash in 16 gauge 430 stainless steel along the back edge
Stainless steel tubing frame with stainless steel sockets
Stainless steel legs with stainless steel bullet feet
18 gauge 430 stainless steel undershelf with aluminum sockets
Ships as frame, undershelf, and four legs that assemble with the included set screws

See all from Omcan

Specifications

Overall Width	60 in
Overall Depth	30 in
Frame Height	36 in
Overall Height	42 in
Backsplash Height	6 in
Backsplash Material	16 gauge 430 stainless steel
Top Frame	Stainless steel tubing, stainless steel sockets
Frame Tubing	38 x 38 x 1.2 mm (1-1/2 in square)
Undershelf	18 gauge 430 stainless steel, aluminum sockets
Undershelf Item No.	44282
Legs	Stainless steel with stainless steel bullet feet
Overall Loading Capacity	800 lb
Undershelf Capacity	490 lb (222.3 kg)
Number of Shelves	1
Assembly	Frame, undershelf, and legs assemble with set screws
Board Included	No, sold separately
Required Board Size	26 x 60 in
Compatible Board, 3/4 in Thick	Item 43201, 590 lb capacity
Compatible Board, 1 in Thick	Item 43202, 630 lb capacity
Weight	66 lb

Manufacturer's Warranty

1/2 year

Warranty