Omcan 43231 30 x 60 In. Stainless Steel Sink Table, Left Bowl, Undershelf

SKU43231 BrandOmcan

The Omcan 43231 Sink Table

This Omcan sink table puts a 60 x 30 inch stainless steel work surface and a welded prep sink on one set of legs, so a single station covers both the cutting-board side of prep and the rinsing that goes with it. The bowl sits at the left end and measures 16 x 20 inches at 11 inches deep. The work surface stands 34 inches high, the table carries a 1177 pound load rating, and a low lead deck-mounted faucet (item 44719) and a 3 1/2 inch drain basket come with it. Plan your plumbing run first: the drain and both faucet holes sit over the left end, so the table wants water and waste lines on that side. The table ships knocked down; the four legs screw to the undershelf and seat into sockets under the top with set screws.

Welded 304 Stainless Steel Sink Bowl

The bowl is 18-gauge type 304 stainless steel welded into the top. It measures 16 inches side to side by 20 inches front to back by 11 inches deep, sits 4 1/2 inches in from the left end of the table and 4 inches back from the front edge, and has a 3 1/2 inch drain opening at the bottom. The included 3 1/2 inch drain basket fits that opening.

18-Gauge 430 Stainless Steel Top with 6-Inch Backsplash

The top shelf is 18-gauge 430 series stainless steel with a 6 inch backsplash across the full width of the table. With the backsplash the table stands 40 inches overall, so check your clearance if it slides under existing wall shelving.

Deck-Mount Faucet Holes on 4-Inch Centers

Two 1 inch holes are punched through the deck behind the bowl on 4 inch centers, with the first hole centered 10 1/2 inches from the sink end. The low lead deck-mounted faucet that comes with the table, Omcan item 44719, mounts in those holes.

Stainless Undershelf, Hat Channel, and Leg Set

An 18-gauge 430 stainless steel undershelf with aluminum corner brackets spans the leg set and carries a 484 pound rating. A stainless steel hat channel runs under the top. The legs and their sockets are stainless steel, finished with stainless steel bullet feet, and the legs stand 55 inches apart across the front and 25 inches apart side to side.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Prep table and sink in one: 60 x 30 inch work surface with a 16 x 20 inch bowl at the left end
Low lead deck-mounted faucet (item 44719) and 3 1/2 inch drain basket included
Bowl welded into the top in 18 gauge type 304 stainless steel, with a 3 1/2 inch drain opening
18 gauge 430 stainless steel top with a full-width 6 inch backsplash
Two 1 inch faucet holes on 4 inch centers behind the bowl
18 gauge 430 stainless steel undershelf with aluminum corner brackets, plus a stainless steel hat channel under the top
Stainless steel legs, sockets, and bullet feet
Ships knocked down; the legs fasten to the undershelf and top sockets with set screws
Omcan lists 60 inch single deck (44617) and double deck (23989) overshelves and a replacement undershelf (46918) for this table

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$867.73

Prep table and sink in one: 60 x 30 inch work surface with a 16 x 20 inch bowl at the left end

Low lead deck-mounted faucet (item 44719) and 3 1/2 inch drain basket included

Bowl welded into the top in 18 gauge type 304 stainless steel, with a 3 1/2 inch drain opening

18 gauge 430 stainless steel top with a full-width 6 inch backsplash

Two 1 inch faucet holes on 4 inch centers behind the bowl

See full feature list

The Omcan 43231 Sink Table

This Omcan sink table puts a 60 x 30 inch stainless steel work surface and a welded prep sink on one set of legs, so a single station covers both the cutting-board side of prep and the rinsing that goes with it. The bowl sits at the left end and measures 16 x 20 inches at 11 inches deep. The work surface stands 34 inches high, the table carries a 1177 pound load rating, and a low lead deck-mounted faucet (item 44719) and a 3 1/2 inch drain basket come with it. Plan your plumbing run first: the drain and both faucet holes sit over the left end, so the table wants water and waste lines on that side. The table ships knocked down; the four legs screw to the undershelf and seat into sockets under the top with set screws.

Welded 304 Stainless Steel Sink Bowl

The bowl is 18-gauge type 304 stainless steel welded into the top. It measures 16 inches side to side by 20 inches front to back by 11 inches deep, sits 4 1/2 inches in from the left end of the table and 4 inches back from the front edge, and has a 3 1/2 inch drain opening at the bottom. The included 3 1/2 inch drain basket fits that opening.

18-Gauge 430 Stainless Steel Top with 6-Inch Backsplash

The top shelf is 18-gauge 430 series stainless steel with a 6 inch backsplash across the full width of the table. With the backsplash the table stands 40 inches overall, so check your clearance if it slides under existing wall shelving.

Deck-Mount Faucet Holes on 4-Inch Centers

Two 1 inch holes are punched through the deck behind the bowl on 4 inch centers, with the first hole centered 10 1/2 inches from the sink end. The low lead deck-mounted faucet that comes with the table, Omcan item 44719, mounts in those holes.

Stainless Undershelf, Hat Channel, and Leg Set

An 18-gauge 430 stainless steel undershelf with aluminum corner brackets spans the leg set and carries a 484 pound rating. A stainless steel hat channel runs under the top. The legs and their sockets are stainless steel, finished with stainless steel bullet feet, and the legs stand 55 inches apart across the front and 25 inches apart side to side.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Prep table and sink in one: 60 x 30 inch work surface with a 16 x 20 inch bowl at the left end
Low lead deck-mounted faucet (item 44719) and 3 1/2 inch drain basket included
Bowl welded into the top in 18 gauge type 304 stainless steel, with a 3 1/2 inch drain opening
18 gauge 430 stainless steel top with a full-width 6 inch backsplash
Two 1 inch faucet holes on 4 inch centers behind the bowl
18 gauge 430 stainless steel undershelf with aluminum corner brackets, plus a stainless steel hat channel under the top
Stainless steel legs, sockets, and bullet feet
Ships knocked down; the legs fasten to the undershelf and top sockets with set screws
Omcan lists 60 inch single deck (44617) and double deck (23989) overshelves and a replacement undershelf (46918) for this table

Resources & Downloads

Omcan 43231 Specsheet

See all from Omcan

Specifications

Overall Width	60 in
Overall Depth	30 in
Work Surface Height	34 in
Overall Height with Backsplash	40 in
Backsplash Height	6 in
Top Material	18-gauge 430 stainless steel
Sink Bowl Material	18-gauge 304 stainless steel, welded
Sink Bowl Location	Left end
Bowl Width	16 in
Bowl Front to Back	20 in
Bowl Depth	11 in
Bowl Setback from Sink End	4-1/2 in
Bowl Setback from Front Edge	4 in
Drain Opening	3-1/2 in
Drain Basket	3-1/2 in, included
Included Faucet	Low lead deck mount, item 44719
Faucet Holes	2, deck mount
Faucet Hole Spacing	4 in centers
Faucet Hole Diameter	1 in
First Faucet Hole from Sink End	10-1/2 in
Undershelf Material	18-gauge 430 stainless steel
Undershelf Brackets	Aluminum
Hat Channel	18-gauge 430 stainless steel
Legs	Stainless steel with sockets
Feet	Stainless steel bullet
Front Leg Spread	55 in
Side Leg Spread	25 in
Table Load Capacity	1177 lb
Undershelf Load Capacity	484 lb
Weight	67.3 lb

Manufacturer's Warranty

6 Month

Warranty

Certifications & Approvals

NSF Approved

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 43231 Sink Table

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Prep table and sink in one: 60 x 30 inch work surface with a 16 x 20 inch bowl at the left end
Low lead deck-mounted faucet (item 44719) and 3 1/2 inch drain basket included
Bowl welded into the top in 18 gauge type 304 stainless steel, with a 3 1/2 inch drain opening
18 gauge 430 stainless steel top with a full-width 6 inch backsplash
Two 1 inch faucet holes on 4 inch centers behind the bowl
18 gauge 430 stainless steel undershelf with aluminum corner brackets, plus a stainless steel hat channel under the top
Stainless steel legs, sockets, and bullet feet
Ships knocked down; the legs fasten to the undershelf and top sockets with set screws
Omcan lists 60 inch single deck (44617) and double deck (23989) overshelves and a replacement undershelf (46918) for this table

See all from Omcan

Specifications

Overall Width	60 in
Overall Depth	30 in
Work Surface Height	34 in
Overall Height with Backsplash	40 in
Backsplash Height	6 in
Top Material	18-gauge 430 stainless steel
Sink Bowl Material	18-gauge 304 stainless steel, welded
Sink Bowl Location	Left end
Bowl Width	16 in
Bowl Front to Back	20 in
Bowl Depth	11 in
Bowl Setback from Sink End	4-1/2 in
Bowl Setback from Front Edge	4 in
Drain Opening	3-1/2 in
Drain Basket	3-1/2 in, included
Included Faucet	Low lead deck mount, item 44719
Faucet Holes	2, deck mount
Faucet Hole Spacing	4 in centers
Faucet Hole Diameter	1 in
First Faucet Hole from Sink End	10-1/2 in
Undershelf Material	18-gauge 430 stainless steel
Undershelf Brackets	Aluminum
Hat Channel	18-gauge 430 stainless steel
Legs	Stainless steel with sockets
Feet	Stainless steel bullet
Front Leg Spread	55 in
Side Leg Spread	25 in
Table Load Capacity	1177 lb
Undershelf Load Capacity	484 lb
Weight	67.3 lb

Manufacturer's Warranty

1/2 year

Warranty