Omcan 43473 15 In. Blender Station, 9 x 9 x 4 In. Dump Sink, Recessed Step

SKU43473 BrandOmcan

The Omcan 43473 Blender Station

This Omcan blender station gives a blender its own 15 inch slot in the underbar line, pairing a recessed blender step with a 9 by 9 inch dump sink that is 4 inches deep. The station is 15 inches wide by 23 inches deep and stands 30 inches high, 33 inches to the top of the 3 inch backsplash. A 1 inch IPS drain is included for the waste connection, and two 1 inch faucet holes on 4 inch centers are punched in the backsplash. The unit stands on galvanized legs set in sockets with plastic bullet feet.

9 by 9 Inch Dump Sink with Included Drain

The dump sink measures 9 by 9 inches and is 4 inches deep, with a 1 inch drain opening in the centre of its bottom. The 1 inch IPS drain is included and carries the water to the waste line. The sink sits in the rear 13 inches of the top's depth.

Recessed Blender Step

The blender step occupies the front 10 inches of the top and is recessed below the sink deck, with stainless steel sides rising on either side of it. The 3 inch backsplash closes off the back of the station, and the faucet holes in it are set 2-1/4 inches below its top edge, for a splash-mounted faucet. Omcan lists its splash mounted 6 inch spout faucet, item 39254, as the related accessory for this station.

18-Gauge 304 Stainless Steel Construction

The recessed step, backsplash, dump sink, sides, and hat channel are all 18-gauge 304 stainless steel.

Open Back and Bottom on Galvanized Legs

The back and bottom of the station are open. Galvanized legs seat in sockets and stand on plastic bullet feet, with the bottom of the body 17-1/2 inches above the floor and a leg spread of 20-11/16 inches front to back by 12-11/16 inches side to side. Omcan lists its 18-gauge 304 stainless steel bar drainboard, item 43472, as a related product on the same leg and foot base.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Underbar blender station with a recessed blender step and a dump sink in a 15 inch wide footprint
9 by 9 inch dump sink, 4 inches deep, with a 1 inch drain opening in the centre of its bottom
1 inch IPS drain included for the waste line connection
Two 1 inch faucet holes on 4 inch centers in the 3 inch backsplash, for a splash-mounted faucet
Omcan's splash mounted 6 inch spout faucet, item 39254, is the listed related accessory
18-gauge 304 stainless steel step, backsplash, dump sink, sides and hat channel
Open back and bottom, on galvanized legs set in sockets with plastic bullet feet

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$700.96

Underbar blender station with a recessed blender step and a dump sink in a 15 inch wide footprint

9 by 9 inch dump sink, 4 inches deep, with a 1 inch drain opening in the centre of its bottom

1 inch IPS drain included for the waste line connection

Two 1 inch faucet holes on 4 inch centers in the 3 inch backsplash, for a splash-mounted faucet

Omcan's splash mounted 6 inch spout faucet, item 39254, is the listed related accessory

See full feature list

The Omcan 43473 Blender Station

This Omcan blender station gives a blender its own 15 inch slot in the underbar line, pairing a recessed blender step with a 9 by 9 inch dump sink that is 4 inches deep. The station is 15 inches wide by 23 inches deep and stands 30 inches high, 33 inches to the top of the 3 inch backsplash. A 1 inch IPS drain is included for the waste connection, and two 1 inch faucet holes on 4 inch centers are punched in the backsplash. The unit stands on galvanized legs set in sockets with plastic bullet feet.

9 by 9 Inch Dump Sink with Included Drain

The dump sink measures 9 by 9 inches and is 4 inches deep, with a 1 inch drain opening in the centre of its bottom. The 1 inch IPS drain is included and carries the water to the waste line. The sink sits in the rear 13 inches of the top's depth.

Recessed Blender Step

The blender step occupies the front 10 inches of the top and is recessed below the sink deck, with stainless steel sides rising on either side of it. The 3 inch backsplash closes off the back of the station, and the faucet holes in it are set 2-1/4 inches below its top edge, for a splash-mounted faucet. Omcan lists its splash mounted 6 inch spout faucet, item 39254, as the related accessory for this station.

18-Gauge 304 Stainless Steel Construction

The recessed step, backsplash, dump sink, sides, and hat channel are all 18-gauge 304 stainless steel.

Open Back and Bottom on Galvanized Legs

The back and bottom of the station are open. Galvanized legs seat in sockets and stand on plastic bullet feet, with the bottom of the body 17-1/2 inches above the floor and a leg spread of 20-11/16 inches front to back by 12-11/16 inches side to side. Omcan lists its 18-gauge 304 stainless steel bar drainboard, item 43472, as a related product on the same leg and foot base.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Underbar blender station with a recessed blender step and a dump sink in a 15 inch wide footprint
9 by 9 inch dump sink, 4 inches deep, with a 1 inch drain opening in the centre of its bottom
1 inch IPS drain included for the waste line connection
Two 1 inch faucet holes on 4 inch centers in the 3 inch backsplash, for a splash-mounted faucet
Omcan's splash mounted 6 inch spout faucet, item 39254, is the listed related accessory
18-gauge 304 stainless steel step, backsplash, dump sink, sides and hat channel
Open back and bottom, on galvanized legs set in sockets with plastic bullet feet

Resources & Downloads

Omcan 43473 Specsheet

See all from Omcan

Specifications

Dump Sink Size	9 x 9 in
Dump Sink Depth	4 in
Sink Drain Opening	1 in dia., centred
Drain	1 in IPS, included
Backsplash Height	3 in
Faucet Holes	2, 1 in dia.
Faucet Hole Spacing	4 in centers
Faucet Hole Position	2-1/4 in below backsplash top
Related Faucet	Omcan 39254, splash mounted, 6 in spout
Rear Sink Section Depth	13 in
Front Step Area Depth	10 in
Material	18-gauge 304 stainless steel
Construction	Open back and bottom
Legs	Galvanized, socket mount
Feet	Plastic bullet
Leg Spread, Front to Back	20-11/16 in
Leg Spread, Side to Side	12-11/16 in
Floor to Bottom of Body	17-1/2 in
Overall Width	15 in
Overall Depth	23 in
Work Surface Height	30 in
Overall Height	33 in with backsplash
Weight	26.4 lb

Manufacturer's Warranty

6 Month

Warranty

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 43473 Blender Station

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Underbar blender station with a recessed blender step and a dump sink in a 15 inch wide footprint
9 by 9 inch dump sink, 4 inches deep, with a 1 inch drain opening in the centre of its bottom
1 inch IPS drain included for the waste line connection
Two 1 inch faucet holes on 4 inch centers in the 3 inch backsplash, for a splash-mounted faucet
Omcan's splash mounted 6 inch spout faucet, item 39254, is the listed related accessory
18-gauge 304 stainless steel step, backsplash, dump sink, sides and hat channel
Open back and bottom, on galvanized legs set in sockets with plastic bullet feet

See all from Omcan

Specifications

Dump Sink Size	9 x 9 in
Dump Sink Depth	4 in
Sink Drain Opening	1 in dia., centred
Drain	1 in IPS, included
Backsplash Height	3 in
Faucet Holes	2, 1 in dia.
Faucet Hole Spacing	4 in centers
Faucet Hole Position	2-1/4 in below backsplash top
Related Faucet	Omcan 39254, splash mounted, 6 in spout
Rear Sink Section Depth	13 in
Front Step Area Depth	10 in
Material	18-gauge 304 stainless steel
Construction	Open back and bottom
Legs	Galvanized, socket mount
Feet	Plastic bullet
Leg Spread, Front to Back	20-11/16 in
Leg Spread, Side to Side	12-11/16 in
Floor to Bottom of Body	17-1/2 in
Overall Width	15 in
Overall Depth	23 in
Work Surface Height	30 in
Overall Height	33 in with backsplash
Weight	26.4 lb

Manufacturer's Warranty

1/2 year

Warranty