Skip to content
Request Quote Check Order Status Financing About Us Contact Us

Omcan 43481 60 In. Cabinet Base Work Table, Sliding Doors, 430 Stainless Steel Top, 6 In. Backsplash

SKU43481 BrandOmcan
Omcan 43481 60 In. Cabinet Base Work Table, Sliding Doors, 430 Stainless Steel Top, 6 In. Backsplash

The Omcan 43481 Work Table

This Omcan cabinet base work table pairs a 16-gauge 430 stainless steel top with an enclosed storage base, giving you a 60 inch stretch of prep counter that keeps mixing bowls, containers, and other kitchen preparation supplies behind sliding doors. The work surface sits at 36 inches and the 6 inch backsplash carries the overall height to 42 inches against the wall, so measure both your wall run and the clearance under any shelving above before ordering. Inside, an intermediate shelf rated for 250 pounds adds a second storage level.

Enclosed Cabinet Base with Sliding Doors

The base is a fully enclosed cabinet with sliding doors, so prep supplies stay covered instead of sitting on an open undershelf. There are 6 inches of clearance between the cabinet bottom and the floor.

16-Gauge 430 Stainless Steel Top over an 18-Gauge Body

The top shelf is 16-gauge 430 stainless steel. The hat channel, back, sides, bottom, and intermediate shelf are 18-gauge 430 stainless steel. The table is very easy to clean.

6-Inch Backsplash with a 2-Inch Return

The 6 inch backsplash rises off the back edge and turns forward in a 2 inch return with a 3/4 inch radius.

Intermediate Shelf Inside the Cabinet

A 1-1/2 inch thick intermediate shelf divides the cabinet into two storage levels. The shelf runs 58-1/2 inches wide by 20 inches deep and is rated to carry 250 pounds.

Stainless Steel Legs with Bullet Feet

Stainless steel legs carry the cabinet with bullet feet at the floor, for maximum stability. The replacement stainless steel foot for worktables with cabinet is item AC015 and the replacement clip/bracket is item 69758.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. Enclosed prep and storage work table for a 60 inch wall run
  2. Enclosed cabinet keeps mixing bowls, containers, and prep supplies covered behind doors
  3. Sliding doors on the cabinet front
  4. 16-gauge 430 stainless steel top shelf with a 6 inch backsplash
  5. 18-gauge 430 stainless steel hat channel, back, sides, bottom, and intermediate shelf
  6. Backsplash turns forward in a 2 inch return with a 3/4 inch radius
  7. Intermediate shelf adds a second storage level inside the cabinet
  8. Stainless steel legs finished with bullet feet for stability
  9. Very easy to clean
  10. Replacement stainless steel foot (AC015) and clip/bracket (69758) available

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,245.35
  • Enclosed prep and storage work table for a 60 inch wall run
  • Enclosed cabinet keeps mixing bowls, containers, and prep supplies covered behind doors
  • Sliding doors on the cabinet front
  • 16-gauge 430 stainless steel top shelf with a 6 inch backsplash
  • 18-gauge 430 stainless steel hat channel, back, sides, bottom, and intermediate shelf
    • See full feature list

    The Omcan 43481 Work Table

    This Omcan cabinet base work table pairs a 16-gauge 430 stainless steel top with an enclosed storage base, giving you a 60 inch stretch of prep counter that keeps mixing bowls, containers, and other kitchen preparation supplies behind sliding doors. The work surface sits at 36 inches and the 6 inch backsplash carries the overall height to 42 inches against the wall, so measure both your wall run and the clearance under any shelving above before ordering. Inside, an intermediate shelf rated for 250 pounds adds a second storage level.

    Enclosed Cabinet Base with Sliding Doors

    The base is a fully enclosed cabinet with sliding doors, so prep supplies stay covered instead of sitting on an open undershelf. There are 6 inches of clearance between the cabinet bottom and the floor.

    16-Gauge 430 Stainless Steel Top over an 18-Gauge Body

    The top shelf is 16-gauge 430 stainless steel. The hat channel, back, sides, bottom, and intermediate shelf are 18-gauge 430 stainless steel. The table is very easy to clean.

    6-Inch Backsplash with a 2-Inch Return

    The 6 inch backsplash rises off the back edge and turns forward in a 2 inch return with a 3/4 inch radius.

    Intermediate Shelf Inside the Cabinet

    A 1-1/2 inch thick intermediate shelf divides the cabinet into two storage levels. The shelf runs 58-1/2 inches wide by 20 inches deep and is rated to carry 250 pounds.

    Stainless Steel Legs with Bullet Feet

    Stainless steel legs carry the cabinet with bullet feet at the floor, for maximum stability. The replacement stainless steel foot for worktables with cabinet is item AC015 and the replacement clip/bracket is item 69758.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. Enclosed prep and storage work table for a 60 inch wall run
    2. Enclosed cabinet keeps mixing bowls, containers, and prep supplies covered behind doors
    3. Sliding doors on the cabinet front
    4. 16-gauge 430 stainless steel top shelf with a 6 inch backsplash
    5. 18-gauge 430 stainless steel hat channel, back, sides, bottom, and intermediate shelf
    6. Backsplash turns forward in a 2 inch return with a 3/4 inch radius
    7. Intermediate shelf adds a second storage level inside the cabinet
    8. Stainless steel legs finished with bullet feet for stability
    9. Very easy to clean
    10. Replacement stainless steel foot (AC015) and clip/bracket (69758) available

    Resources & Downloads

    See all from Omcan

    Specifications

    Overall Width60 in
    Overall Depth24 in
    Work Surface Height36 in
    Overall Height with Backsplash42 in
    Backsplash Height6 in
    Backsplash Return2 in, 3/4 in radius
    Top Material430 stainless steel
    Top Gauge16 gauge
    Body Material430 stainless steel
    Body Gauge18 gauge
    BaseEnclosed cabinet
    DoorsSliding
    Intermediate Shelf (D x W x H)20 x 58-1/2 x 1-1/2 in
    Intermediate Shelf Capacity250 lb
    Clearance Under Cabinet6 in
    LegsStainless steel
    FeetStainless steel bullet feet
    Replacement FootItem AC015
    Replacement Clip/BracketItem 69758

    Manufacturer's Warranty

    • 6 Month

      Warranty

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 43481 Work Table

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. Enclosed prep and storage work table for a 60 inch wall run
    2. Enclosed cabinet keeps mixing bowls, containers, and prep supplies covered behind doors
    3. Sliding doors on the cabinet front
    4. 16-gauge 430 stainless steel top shelf with a 6 inch backsplash
    5. 18-gauge 430 stainless steel hat channel, back, sides, bottom, and intermediate shelf
    6. Backsplash turns forward in a 2 inch return with a 3/4 inch radius
    7. Intermediate shelf adds a second storage level inside the cabinet
    8. Stainless steel legs finished with bullet feet for stability
    9. Very easy to clean
    10. Replacement stainless steel foot (AC015) and clip/bracket (69758) available

    See all from Omcan

    Specifications

    Overall Width60 in
    Overall Depth24 in
    Work Surface Height36 in
    Overall Height with Backsplash42 in
    Backsplash Height6 in
    Backsplash Return2 in, 3/4 in radius
    Top Material430 stainless steel
    Top Gauge16 gauge
    Body Material430 stainless steel
    Body Gauge18 gauge
    BaseEnclosed cabinet
    DoorsSliding
    Intermediate Shelf (D x W x H)20 x 58-1/2 x 1-1/2 in
    Intermediate Shelf Capacity250 lb
    Clearance Under Cabinet6 in
    LegsStainless steel
    FeetStainless steel bullet feet
    Replacement FootItem AC015
    Replacement Clip/BracketItem 69758

    Manufacturer's Warranty

      1/2 year

      Warranty

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch