The Omcan 43782 2 Compartment Sink
This Omcan two compartment pot sink puts two 18 x 21 inch bowls side by side, each 14 inches deep, so one bowl can wash while the other rinses. A drain board on each side adds an 18 inch wide landing surface at both ends of the bowls. The whole unit runs 72 inches wide, so measure your wall run before ordering. The sink ships with its 16-gauge galvanized legs removed, and the legs attach during installation.
Two 14 Inch Deep 18 by 21 Inch Bowls
Each bowl measures 18 x 21 inches and is 14 inches deep, with a 3/4 inch radius where the bowl walls meet the bottom and a 2 inch divider between the two bowls. The same layout with two drain boards is also made with 18 x 18 x 11 inch bowls (item 43767) and 24 x 24 x 14 inch bowls (item 43793), and in a corner drain version with these bowls as item 25269. Omcan also makes the 18 x 21 inch center drain sink with a left drain board (item 43779), without a drain board (item 43780), and with a right drain board (item 43781).
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The backsplash measures 9 3/4 inches from its top edge to the bottom of the front apron and is turned back 2 inches at the top. Two 1 1/8 inch faucet holes are punched in the backsplash 8 inches on center, 2 1/2 inches above the bowl rim and 39 inches above the floor. Omcan lists splash mounted faucets for this sink as items 39256, 23516, 22289, and 47819, pre-rinse assemblies as items 22123 and 22124, and left and right stainless steel splash guards as items 47731 and 47732.
Center Drains with Included Drain Guards
A 3.5 inch drain sits in the center of each bowl floor, and the sink comes with drain guards. The corner drain version of this sink uses a 1.8 inch drain instead.
Drain Boards on Both Sides
Each drain board runs 18 inches wide and the full depth of the sink top, so cookware can sit at either end of the bowls.
Knockdown Legs
The 16-gauge galvanized legs ship removed and fasten to the underside of the sink with screws during installation. The legs stand 31 1/2 inches apart side to side and 16 1/2 inches front to back, measured on center. An optional leg brace, item 31485, is listed for this sink.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with 18 x 21 inch bowls, one for washing and one for rinsing
-
18-gauge stainless steel sink with a backsplash turned back at the top
-
Center drain in each bowl floor, with drain guards included
-
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
-
Drain boards on both sides, each 18 inches wide, for landing cookware at either end
-
16-gauge galvanized legs ship removed and screw on during installation
-
Optional leg brace (item 31485) and left and right splash guards (items 47731 and 47732) available
-
Same layout offered with 18 x 18, 18 x 21, and 24 x 24 inch bowls, and with a corner drain
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Two compartment pot sink with 18 x 21 inch bowls, one for washing and one for rinsing
18-gauge stainless steel sink with a backsplash turned back at the top
Center drain in each bowl floor, with drain guards included
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
Drain boards on both sides, each 18 inches wide, for landing cookware at either end
The Omcan 43782 2 Compartment Sink
This Omcan two compartment pot sink puts two 18 x 21 inch bowls side by side, each 14 inches deep, so one bowl can wash while the other rinses. A drain board on each side adds an 18 inch wide landing surface at both ends of the bowls. The whole unit runs 72 inches wide, so measure your wall run before ordering. The sink ships with its 16-gauge galvanized legs removed, and the legs attach during installation.
Two 14 Inch Deep 18 by 21 Inch Bowls
Each bowl measures 18 x 21 inches and is 14 inches deep, with a 3/4 inch radius where the bowl walls meet the bottom and a 2 inch divider between the two bowls. The same layout with two drain boards is also made with 18 x 18 x 11 inch bowls (item 43767) and 24 x 24 x 14 inch bowls (item 43793), and in a corner drain version with these bowls as item 25269. Omcan also makes the 18 x 21 inch center drain sink with a left drain board (item 43779), without a drain board (item 43780), and with a right drain board (item 43781).
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The backsplash measures 9 3/4 inches from its top edge to the bottom of the front apron and is turned back 2 inches at the top. Two 1 1/8 inch faucet holes are punched in the backsplash 8 inches on center, 2 1/2 inches above the bowl rim and 39 inches above the floor. Omcan lists splash mounted faucets for this sink as items 39256, 23516, 22289, and 47819, pre-rinse assemblies as items 22123 and 22124, and left and right stainless steel splash guards as items 47731 and 47732.
Center Drains with Included Drain Guards
A 3.5 inch drain sits in the center of each bowl floor, and the sink comes with drain guards. The corner drain version of this sink uses a 1.8 inch drain instead.
Drain Boards on Both Sides
Each drain board runs 18 inches wide and the full depth of the sink top, so cookware can sit at either end of the bowls.
Knockdown Legs
The 16-gauge galvanized legs ship removed and fasten to the underside of the sink with screws during installation. The legs stand 31 1/2 inches apart side to side and 16 1/2 inches front to back, measured on center. An optional leg brace, item 31485, is listed for this sink.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with 18 x 21 inch bowls, one for washing and one for rinsing
-
18-gauge stainless steel sink with a backsplash turned back at the top
-
Center drain in each bowl floor, with drain guards included
-
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
-
Drain boards on both sides, each 18 inches wide, for landing cookware at either end
-
16-gauge galvanized legs ship removed and screw on during installation
-
Optional leg brace (item 31485) and left and right splash guards (items 47731 and 47732) available
-
Same layout offered with 18 x 18, 18 x 21, and 24 x 24 inch bowls, and with a corner drain
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 2 |
| Bowl Size | 18 x 21 in |
| Bowl Depth | 14 in |
| Bowl Bottom Corner Radius | 3/4 in |
| Divider Between Bowls | 2 in |
| Drain Location | Center |
| Drain Size | 3.5 in |
| Drain Guards | Included |
| Faucet Holes | 2 |
| Faucet Hole Spacing | 8 in centers |
| Faucet Hole Diameter | 1-1/8 in |
| Faucet Hole Height Above Floor | 39 in |
| Faucet Hole Height Above Rim | 2-1/2 in |
| Backsplash, Top Edge to Apron Bottom | 9-3/4 in |
| Backsplash Top Return | 2 in |
| Drain Board | Left and right |
| Drain Board Width | 18 in |
| Material | 18-gauge stainless steel |
| Legs | 16-gauge galvanized, shipped removed |
| Leg Spacing (W x D, on center) | 31-1/2 x 16-1/2 in |
| Assembly | Knockdown, legs attach on site |
| Overall Width | 72 in |
| Overall Depth | 26-1/2 in |
| Overall Height | 44 in |
| Weight | 95 lb (43 kg) |
| Optional Leg Brace | Item 31485 |
| Corner Drain Version | Item 25269 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Two compartment pot sink with 18 x 21 inch bowls, one for washing and one for rinsing