The Omcan 43791 2 Compartment Sink
This Omcan two compartment pot sink puts two 24 x 24 inch bowls side by side, each 14 inches deep, so one bowl can wash while the other rinses. There is no drain board on this model, which keeps the overall width to 53 inches. The sink ships with its 16-gauge galvanized legs removed, and the legs attach during installation.
Two 14 Inch Deep 24 by 24 Inch Bowls
Each bowl measures 24 x 24 inches and is 14 inches deep, with a 3/4 inch radius where the bowl walls meet the bottom and a 2 inch divider between the two bowls. The same layout with no drain board is also made with 18 x 18 x 11 inch bowls (item 43769) and 18 x 21 x 14 inch bowls (item 43780), and in a corner drain version with these bowls as item 22119. Omcan also makes the 24 x 24 inch center drain sink with a left drain board (item 43790), with a right drain board (item 43792), and with two drain boards (item 43793).
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The backsplash measures 9 3/4 inches from its top edge to the bottom of the front apron and is turned back 2 inches at the top. Two 1 1/8 inch faucet holes are punched in the backsplash 8 inches on center, 2 1/2 inches above the bowl rim and 39 inches above the floor. Omcan lists splash mounted faucets for this sink as items 23516, 23517, 22289, and 47819, pre-rinse assemblies as items 22123 and 22124, and left and right stainless steel splash guards as items 47733 and 47734.
Center Drains with Included Drain Guards
A 3.5 inch drain sits in the center of each bowl floor, and the sink comes with drain guards. The corner drain version of this sink uses a 1.8 inch drain instead.
53-Inch Overall Width
At 53 inches wide and 29 1/2 inches front to back, this is the narrowest version of the 24 x 24 inch two tub sink. Omcan lists a 24 x 24 inch removable stainless steel drain board, item 21143, as an accessory for this sink if you want a landing surface.
Knockdown Legs
The 16-gauge galvanized legs ship removed and fasten to the underside of the sink with screws during installation. The legs stand 43 1/2 inches apart side to side and 19 1/2 inches front to back, measured on center. An optional leg brace, item 21140, is listed for this sink.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing
-
18-gauge stainless steel sink with a backsplash turned back at the top
-
Center drain in each bowl floor, with drain guards included
-
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
-
No drain board, giving the narrowest footprint in the 24 x 24 inch two tub line
-
16-gauge galvanized legs ship removed and screw on during installation
-
Optional leg brace (item 21140) and left and right splash guards (items 47733 and 47734) available
-
Same layout offered with 18 x 18, 18 x 21, and 24 x 24 inch bowls, and with a corner drain
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing
18-gauge stainless steel sink with a backsplash turned back at the top
Center drain in each bowl floor, with drain guards included
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
No drain board, giving the narrowest footprint in the 24 x 24 inch two tub line
The Omcan 43791 2 Compartment Sink
This Omcan two compartment pot sink puts two 24 x 24 inch bowls side by side, each 14 inches deep, so one bowl can wash while the other rinses. There is no drain board on this model, which keeps the overall width to 53 inches. The sink ships with its 16-gauge galvanized legs removed, and the legs attach during installation.
Two 14 Inch Deep 24 by 24 Inch Bowls
Each bowl measures 24 x 24 inches and is 14 inches deep, with a 3/4 inch radius where the bowl walls meet the bottom and a 2 inch divider between the two bowls. The same layout with no drain board is also made with 18 x 18 x 11 inch bowls (item 43769) and 18 x 21 x 14 inch bowls (item 43780), and in a corner drain version with these bowls as item 22119. Omcan also makes the 24 x 24 inch center drain sink with a left drain board (item 43790), with a right drain board (item 43792), and with two drain boards (item 43793).
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The backsplash measures 9 3/4 inches from its top edge to the bottom of the front apron and is turned back 2 inches at the top. Two 1 1/8 inch faucet holes are punched in the backsplash 8 inches on center, 2 1/2 inches above the bowl rim and 39 inches above the floor. Omcan lists splash mounted faucets for this sink as items 23516, 23517, 22289, and 47819, pre-rinse assemblies as items 22123 and 22124, and left and right stainless steel splash guards as items 47733 and 47734.
Center Drains with Included Drain Guards
A 3.5 inch drain sits in the center of each bowl floor, and the sink comes with drain guards. The corner drain version of this sink uses a 1.8 inch drain instead.
53-Inch Overall Width
At 53 inches wide and 29 1/2 inches front to back, this is the narrowest version of the 24 x 24 inch two tub sink. Omcan lists a 24 x 24 inch removable stainless steel drain board, item 21143, as an accessory for this sink if you want a landing surface.
Knockdown Legs
The 16-gauge galvanized legs ship removed and fasten to the underside of the sink with screws during installation. The legs stand 43 1/2 inches apart side to side and 19 1/2 inches front to back, measured on center. An optional leg brace, item 21140, is listed for this sink.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing
-
18-gauge stainless steel sink with a backsplash turned back at the top
-
Center drain in each bowl floor, with drain guards included
-
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
-
No drain board, giving the narrowest footprint in the 24 x 24 inch two tub line
-
16-gauge galvanized legs ship removed and screw on during installation
-
Optional leg brace (item 21140) and left and right splash guards (items 47733 and 47734) available
-
Same layout offered with 18 x 18, 18 x 21, and 24 x 24 inch bowls, and with a corner drain
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 2 |
| Bowl Size | 24 x 24 in |
| Bowl Depth | 14 in |
| Bowl Bottom Corner Radius | 3/4 in |
| Divider Between Bowls | 2 in |
| Drain Location | Center |
| Drain Size | 3.5 in |
| Drain Guards | Included |
| Faucet Holes | 2 |
| Faucet Hole Spacing | 8 in centers |
| Faucet Hole Diameter | 1-1/8 in |
| Faucet Hole Height Above Floor | 39 in |
| Faucet Hole Height Above Rim | 2-1/2 in |
| Backsplash, Top Edge to Apron Bottom | 9-3/4 in |
| Backsplash Top Return | 2 in |
| Drain Board | None |
| Material | 18-gauge stainless steel |
| Legs | 16-gauge galvanized, shipped removed |
| Leg Spacing (W x D, on center) | 43-1/2 x 19-1/2 in |
| Assembly | Knockdown, legs attach on site |
| Overall Width | 53 in |
| Overall Depth | 29-1/2 in |
| Overall Height | 44 in |
| Weight | 80 lb (36 kg) |
| Optional Leg Brace | Item 21140 |
| Corner Drain Version | Item 22119 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing