The Omcan 43792 2 Compartment Sink
This Omcan two compartment pot sink puts two 24 x 24 inch bowls side by side, each 14 inches deep, so one bowl can wash while the other rinses. A drain board on the right side adds a 24 inch wide landing surface beside the bowls. The whole unit runs 74 1/2 inches wide, so measure your wall run before ordering. The sink ships with its 16-gauge galvanized legs removed, and the legs attach during installation.
Two 14 Inch Deep 24 by 24 Inch Bowls
Each bowl measures 24 x 24 inches and is 14 inches deep, with a 3/4 inch radius where the bowl walls meet the bottom and a 2 inch divider between the two bowls. The same layout with a right drain board is also made with 18 x 18 x 11 inch bowls (item 43770) and 18 x 21 x 14 inch bowls (item 43781), and in a corner drain version with these bowls as item 25257. Omcan also makes the 24 x 24 inch center drain sink with a left drain board (item 43790), without a drain board (item 43791), and with two drain boards (item 43793).
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The backsplash measures 9 3/4 inches from its top edge to the bottom of the front apron and is turned back 2 inches at the top. Two 1 1/8 inch faucet holes are punched in the backsplash 8 inches on center, 2 1/2 inches above the bowl rim and 39 inches above the floor. Omcan lists splash mounted faucets for this sink as items 23516, 23517, 22289, and 47819, pre-rinse assemblies as items 22123 and 22124, and left and right stainless steel splash guards as items 47733 and 47734.
Center Drains with Included Drain Guards
A 3.5 inch drain sits in the center of each bowl floor, and the sink comes with drain guards. The corner drain version of this sink uses a 1.8 inch drain instead.
Right Drain Board
The drain board on the right runs 24 inches wide and the full depth of the sink top, giving pots and pans a place to sit beside the bowls.
Knockdown Legs
The 16-gauge galvanized legs ship removed and fasten to the underside of the sink with screws during installation. The legs stand 43 1/2 inches apart side to side and 19 1/2 inches front to back, measured on center. An optional leg brace, item 21140, is listed for this sink.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing
-
18-gauge stainless steel sink with a backsplash turned back at the top
-
Center drain in each bowl floor, with drain guards included
-
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
-
Drain board on the right side, 24 inches wide, for landing cookware beside the bowls
-
16-gauge galvanized legs ship removed and screw on during installation
-
Optional leg brace (item 21140) and left and right splash guards (items 47733 and 47734) available
-
Same layout offered with 18 x 18, 18 x 21, and 24 x 24 inch bowls, and with a corner drain
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing
18-gauge stainless steel sink with a backsplash turned back at the top
Center drain in each bowl floor, with drain guards included
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
Drain board on the right side, 24 inches wide, for landing cookware beside the bowls
The Omcan 43792 2 Compartment Sink
This Omcan two compartment pot sink puts two 24 x 24 inch bowls side by side, each 14 inches deep, so one bowl can wash while the other rinses. A drain board on the right side adds a 24 inch wide landing surface beside the bowls. The whole unit runs 74 1/2 inches wide, so measure your wall run before ordering. The sink ships with its 16-gauge galvanized legs removed, and the legs attach during installation.
Two 14 Inch Deep 24 by 24 Inch Bowls
Each bowl measures 24 x 24 inches and is 14 inches deep, with a 3/4 inch radius where the bowl walls meet the bottom and a 2 inch divider between the two bowls. The same layout with a right drain board is also made with 18 x 18 x 11 inch bowls (item 43770) and 18 x 21 x 14 inch bowls (item 43781), and in a corner drain version with these bowls as item 25257. Omcan also makes the 24 x 24 inch center drain sink with a left drain board (item 43790), without a drain board (item 43791), and with two drain boards (item 43793).
18-Gauge Stainless Steel Construction
The sink is 18-gauge stainless steel. The backsplash measures 9 3/4 inches from its top edge to the bottom of the front apron and is turned back 2 inches at the top. Two 1 1/8 inch faucet holes are punched in the backsplash 8 inches on center, 2 1/2 inches above the bowl rim and 39 inches above the floor. Omcan lists splash mounted faucets for this sink as items 23516, 23517, 22289, and 47819, pre-rinse assemblies as items 22123 and 22124, and left and right stainless steel splash guards as items 47733 and 47734.
Center Drains with Included Drain Guards
A 3.5 inch drain sits in the center of each bowl floor, and the sink comes with drain guards. The corner drain version of this sink uses a 1.8 inch drain instead.
Right Drain Board
The drain board on the right runs 24 inches wide and the full depth of the sink top, giving pots and pans a place to sit beside the bowls.
Knockdown Legs
The 16-gauge galvanized legs ship removed and fasten to the underside of the sink with screws during installation. The legs stand 43 1/2 inches apart side to side and 19 1/2 inches front to back, measured on center. An optional leg brace, item 21140, is listed for this sink.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing
-
18-gauge stainless steel sink with a backsplash turned back at the top
-
Center drain in each bowl floor, with drain guards included
-
Two faucet holes in the backsplash on 8 inch centers, with matching splash mounted faucets listed by Omcan
-
Drain board on the right side, 24 inches wide, for landing cookware beside the bowls
-
16-gauge galvanized legs ship removed and screw on during installation
-
Optional leg brace (item 21140) and left and right splash guards (items 47733 and 47734) available
-
Same layout offered with 18 x 18, 18 x 21, and 24 x 24 inch bowls, and with a corner drain
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 2 |
| Bowl Size | 24 x 24 in |
| Bowl Depth | 14 in |
| Bowl Bottom Corner Radius | 3/4 in |
| Divider Between Bowls | 2 in |
| Drain Location | Center |
| Drain Size | 3.5 in |
| Drain Guards | Included |
| Faucet Holes | 2 |
| Faucet Hole Spacing | 8 in centers |
| Faucet Hole Diameter | 1-1/8 in |
| Faucet Hole Height Above Floor | 39 in |
| Faucet Hole Height Above Rim | 2-1/2 in |
| Backsplash, Top Edge to Apron Bottom | 9-3/4 in |
| Backsplash Top Return | 2 in |
| Drain Board | Right |
| Drain Board Width | 24 in |
| Material | 18-gauge stainless steel |
| Legs | 16-gauge galvanized, shipped removed |
| Leg Spacing (W x D, on center) | 43-1/2 x 19-1/2 in |
| Assembly | Knockdown, legs attach on site |
| Overall Width | 74-1/2 in |
| Overall Depth | 29-1/2 in |
| Overall Height | 44 in |
| Weight | 106 lb (48 kg) |
| Optional Leg Brace | Item 21140 |
| Corner Drain Version | Item 25257 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Two compartment pot sink with 24 x 24 inch bowls, one for washing and one for rinsing