Skip to content

Omcan 44193 60 x 30 In. Cabinet Base Work Table, Sliding Doors, 430 Stainless Steel Flat Top, Intermediate Shelf

SKU44193 BrandOmcan

The Omcan 44193 Work Table

This Omcan cabinet base work table puts a 16-gauge 430 stainless steel flat top over an enclosed sliding-door cabinet, a 60 by 30 inch station rated for a 380 pound load. The top is flat with no backsplash, so measure the 60 inch footprint before ordering. Below the top, an intermediate shelf splits the cabinet into two covered storage levels for prep supplies, and the doors and body are 18-gauge 430 stainless steel.

Enclosed Cabinet Base with Sliding Doors

The 18-gauge 430 stainless steel doors slide rather than swing outward, and their handles are recessed into the door face. The cabinet bottom sits 6 inches above the floor on the legs.

16-Gauge 430 Stainless Steel Top over an 18-Gauge Body

The flat top shelf is 16-gauge 430 stainless steel. The hat channel, pilaster strips, back, sides, bottom, and intermediate shelf are 18-gauge 430 stainless steel.

Flat Top and 380-Pound Load Capacity

The top is flat with no backsplash and a 3/4 inch edge, and the table is rated for a 380 pound load.

Intermediate Shelf Inside the Cabinet

An 18-gauge 430 stainless steel intermediate shelf divides the cabinet into two covered levels behind the sliding doors.

Stainless Steel Legs with Bullet Feet

Stainless steel legs with stainless steel bullet feet carry the cabinet. The legs sit 54-7/8 inches apart side to side and 23-1/2 inches apart front to back. Casters with brake (item 46585) and without brake (item 46586) are listed for worktable cabinets, and a replacement stainless steel foot is available as item AC015.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. Enclosed storage work table with a flat 16-gauge 430 stainless steel top for a 60 inch station
  2. Enclosed cabinet keeps prep supplies covered behind sliding doors
  3. Sliding 18-gauge 430 stainless steel doors slide past each other instead of swinging out
  4. Handles are recessed into the door face
  5. 18-gauge 430 stainless steel hat channel, pilaster strips, back, sides, bottom, and intermediate shelf
  6. Intermediate shelf adds a second covered storage level inside the cabinet
  7. Stainless steel legs with stainless steel bullet feet

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,269.93
  • Enclosed storage work table with a flat 16-gauge 430 stainless steel top for a 60 inch station
  • Enclosed cabinet keeps prep supplies covered behind sliding doors
  • Sliding 18-gauge 430 stainless steel doors slide past each other instead of swinging out
  • Handles are recessed into the door face
  • 18-gauge 430 stainless steel hat channel, pilaster strips, back, sides, bottom, and intermediate shelf
  • See full feature list

    The Omcan 44193 Work Table

    This Omcan cabinet base work table puts a 16-gauge 430 stainless steel flat top over an enclosed sliding-door cabinet, a 60 by 30 inch station rated for a 380 pound load. The top is flat with no backsplash, so measure the 60 inch footprint before ordering. Below the top, an intermediate shelf splits the cabinet into two covered storage levels for prep supplies, and the doors and body are 18-gauge 430 stainless steel.

    Enclosed Cabinet Base with Sliding Doors

    The 18-gauge 430 stainless steel doors slide rather than swing outward, and their handles are recessed into the door face. The cabinet bottom sits 6 inches above the floor on the legs.

    16-Gauge 430 Stainless Steel Top over an 18-Gauge Body

    The flat top shelf is 16-gauge 430 stainless steel. The hat channel, pilaster strips, back, sides, bottom, and intermediate shelf are 18-gauge 430 stainless steel.

    Flat Top and 380-Pound Load Capacity

    The top is flat with no backsplash and a 3/4 inch edge, and the table is rated for a 380 pound load.

    Intermediate Shelf Inside the Cabinet

    An 18-gauge 430 stainless steel intermediate shelf divides the cabinet into two covered levels behind the sliding doors.

    Stainless Steel Legs with Bullet Feet

    Stainless steel legs with stainless steel bullet feet carry the cabinet. The legs sit 54-7/8 inches apart side to side and 23-1/2 inches apart front to back. Casters with brake (item 46585) and without brake (item 46586) are listed for worktable cabinets, and a replacement stainless steel foot is available as item AC015.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. Enclosed storage work table with a flat 16-gauge 430 stainless steel top for a 60 inch station
    2. Enclosed cabinet keeps prep supplies covered behind sliding doors
    3. Sliding 18-gauge 430 stainless steel doors slide past each other instead of swinging out
    4. Handles are recessed into the door face
    5. 18-gauge 430 stainless steel hat channel, pilaster strips, back, sides, bottom, and intermediate shelf
    6. Intermediate shelf adds a second covered storage level inside the cabinet
    7. Stainless steel legs with stainless steel bullet feet

    Resources & Downloads

    See all from Omcan

    Specifications

    Overall Width60 in
    Overall Depth30 in
    Overall Height36 in
    Top StyleFlat, no backsplash
    Top Material430 stainless steel
    Top Gauge16 gauge
    Top Edge3/4 in
    Body Material430 stainless steel
    Body Gauge18 gauge
    Load Capacity380 lb
    BaseEnclosed cabinet
    DoorsSliding, 18-gauge 430 stainless steel
    Door HandlesRecessed
    Floor to Cabinet Bottom6 in
    Leg Spacing (Side to Side)54-7/8 in
    Leg Spacing (Front to Back)23-1/2 in
    LegsStainless steel
    FeetStainless steel bullet feet
    Optional CastersItems 46585 (with brake), 46586 (without brake)
    Replacement FootItem AC015
    Weight190 lb

    Manufacturer's Warranty

    • 6 Month

      Warranty

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 44193 Work Table

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. Enclosed storage work table with a flat 16-gauge 430 stainless steel top for a 60 inch station
    2. Enclosed cabinet keeps prep supplies covered behind sliding doors
    3. Sliding 18-gauge 430 stainless steel doors slide past each other instead of swinging out
    4. Handles are recessed into the door face
    5. 18-gauge 430 stainless steel hat channel, pilaster strips, back, sides, bottom, and intermediate shelf
    6. Intermediate shelf adds a second covered storage level inside the cabinet
    7. Stainless steel legs with stainless steel bullet feet

    See all from Omcan

    Specifications

    Overall Width60 in
    Overall Depth30 in
    Overall Height36 in
    Top StyleFlat, no backsplash
    Top Material430 stainless steel
    Top Gauge16 gauge
    Top Edge3/4 in
    Body Material430 stainless steel
    Body Gauge18 gauge
    Load Capacity380 lb
    BaseEnclosed cabinet
    DoorsSliding, 18-gauge 430 stainless steel
    Door HandlesRecessed
    Floor to Cabinet Bottom6 in
    Leg Spacing (Side to Side)54-7/8 in
    Leg Spacing (Front to Back)23-1/2 in
    LegsStainless steel
    FeetStainless steel bullet feet
    Optional CastersItems 46585 (with brake), 46586 (without brake)
    Replacement FootItem AC015
    Weight190 lb

    Manufacturer's Warranty

      1/2 year

      Warranty

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch