The Omcan 44300 Sink Table
This Omcan sink table fits a prep sink into a 60 x 24 inch footprint. The bowl at the right end measures 14 x 16 inches at 10 inches deep. It arrives ready to plumb: a low lead deck-mounted faucet (item 44719) and a 3 1/2 inch drain basket come with the table, so the only parts left to source are supply lines and the waste connection. The table is 18-gauge 430 series stainless steel with a 6 inch backsplash, the work surface stands at 34 inches, and the load rating is 1089 pounds. The legs seat into their sockets on site, so plan the water and waste rough-in at the right end before setup day.
Low Lead Faucet and Drain Basket Included
The included low lead deck-mounted faucet, listed as item 44719 and model FD-4-10LL, mounts in the two 1 inch holes punched on 4 inch centers behind the bowl, with the first hole centered 9 1/2 inches from the sink end. A 3 1/2 inch drain basket for the 3 1/2 inch drain opening is also included.
14 by 16 Inch Sink Bowl
The bowl measures 14 inches side to side by 16 inches front to back by 10 inches deep. It sits 4 1/2 inches in from the right end of the table and 2 inches back from the front edge, with the drain opening at the center of the bowl.
18-Gauge 430 Series Stainless Steel Construction
The table is 18-gauge 430 series stainless steel, with a 6 inch backsplash across the back edge. Overall height is 40 inches with the backsplash, so check clearance under wall shelving.
Undershelf with Aluminum Corner Brackets
The 18-gauge 430 stainless steel undershelf mounts on aluminum corner brackets and carries a 462 pound rating, and an 18-gauge 430 stainless steel hat channel runs under the top. The stainless steel legs and sockets finish in stainless steel bullet feet, with the legs set 55 inches apart across the front and 19 inches apart side to side. The table ships knocked down; the four legs screw to the undershelf and seat into the top sockets with set screws.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
24 inch deep prep-and-rinse table with a 14 x 16 inch bowl at the right end
-
Low lead deck-mounted faucet (item 44719, model FD-4-10LL) and 3 1/2 inch drain basket included
-
Two 1 inch faucet holes on 4 inch centers behind the bowl, ready for the included faucet
-
18 gauge 430 series stainless steel table with a 6 inch backsplash
-
18 gauge 430 stainless steel undershelf on aluminum corner brackets, with a hat channel under the top
-
Stainless steel legs, sockets, and bullet feet
-
Ships knocked down; the legs fasten to the undershelf and top sockets with set screws
-
Omcan lists 60 inch single deck (44617) and double deck (23989) overshelves, a replacement undershelf (46908), and 32 inch legs (28625) for this table
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
24 inch deep prep-and-rinse table with a 14 x 16 inch bowl at the right end
Low lead deck-mounted faucet (item 44719, model FD-4-10LL) and 3 1/2 inch drain basket included
Two 1 inch faucet holes on 4 inch centers behind the bowl, ready for the included faucet
18 gauge 430 series stainless steel table with a 6 inch backsplash
18 gauge 430 stainless steel undershelf on aluminum corner brackets, with a hat channel under the top
The Omcan 44300 Sink Table
This Omcan sink table fits a prep sink into a 60 x 24 inch footprint. The bowl at the right end measures 14 x 16 inches at 10 inches deep. It arrives ready to plumb: a low lead deck-mounted faucet (item 44719) and a 3 1/2 inch drain basket come with the table, so the only parts left to source are supply lines and the waste connection. The table is 18-gauge 430 series stainless steel with a 6 inch backsplash, the work surface stands at 34 inches, and the load rating is 1089 pounds. The legs seat into their sockets on site, so plan the water and waste rough-in at the right end before setup day.
Low Lead Faucet and Drain Basket Included
The included low lead deck-mounted faucet, listed as item 44719 and model FD-4-10LL, mounts in the two 1 inch holes punched on 4 inch centers behind the bowl, with the first hole centered 9 1/2 inches from the sink end. A 3 1/2 inch drain basket for the 3 1/2 inch drain opening is also included.
14 by 16 Inch Sink Bowl
The bowl measures 14 inches side to side by 16 inches front to back by 10 inches deep. It sits 4 1/2 inches in from the right end of the table and 2 inches back from the front edge, with the drain opening at the center of the bowl.
18-Gauge 430 Series Stainless Steel Construction
The table is 18-gauge 430 series stainless steel, with a 6 inch backsplash across the back edge. Overall height is 40 inches with the backsplash, so check clearance under wall shelving.
Undershelf with Aluminum Corner Brackets
The 18-gauge 430 stainless steel undershelf mounts on aluminum corner brackets and carries a 462 pound rating, and an 18-gauge 430 stainless steel hat channel runs under the top. The stainless steel legs and sockets finish in stainless steel bullet feet, with the legs set 55 inches apart across the front and 19 inches apart side to side. The table ships knocked down; the four legs screw to the undershelf and seat into the top sockets with set screws.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
24 inch deep prep-and-rinse table with a 14 x 16 inch bowl at the right end
-
Low lead deck-mounted faucet (item 44719, model FD-4-10LL) and 3 1/2 inch drain basket included
-
Two 1 inch faucet holes on 4 inch centers behind the bowl, ready for the included faucet
-
18 gauge 430 series stainless steel table with a 6 inch backsplash
-
18 gauge 430 stainless steel undershelf on aluminum corner brackets, with a hat channel under the top
-
Stainless steel legs, sockets, and bullet feet
-
Ships knocked down; the legs fasten to the undershelf and top sockets with set screws
-
Omcan lists 60 inch single deck (44617) and double deck (23989) overshelves, a replacement undershelf (46908), and 32 inch legs (28625) for this table
Resources & Downloads
See all from Omcan
Specifications
| Overall Width | 60 in |
| Overall Depth | 24 in |
| Work Surface Height | 34 in |
| Overall Height with Backsplash | 40 in |
| Backsplash Height | 6 in |
| Construction | 18-gauge 430 series stainless steel |
| Sink Bowl Location | Right end |
| Bowl Width | 14 in |
| Bowl Front to Back | 16 in |
| Bowl Depth | 10 in |
| Bowl Setback from Sink End | 4-1/2 in |
| Bowl Setback from Front Edge | 2 in |
| Drain Opening | 3-1/2 in |
| Drain Basket | 3-1/2 in, included |
| Included Faucet | Low lead deck mount, item 44719 (FD-4-10LL) |
| Faucet Holes | 2, deck mount |
| Faucet Hole Spacing | 4 in centers |
| Faucet Hole Diameter | 1 in |
| First Faucet Hole from Sink End | 9-1/2 in |
| Undershelf Material | 18-gauge 430 stainless steel |
| Undershelf Brackets | Aluminum |
| Hat Channel | 18-gauge 430 stainless steel |
| Legs | Stainless steel with sockets |
| Feet | Stainless steel bullet |
| Front Leg Spread | 55 in |
| Side Leg Spread | 19 in |
| Table Load Capacity | 1089 lb |
| Undershelf Load Capacity | 462 lb |
| Weight | 62.9 lb |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
24 inch deep prep-and-rinse table with a 14 x 16 inch bowl at the right end