Omcan 44302 24 x 72 In. Stainless Steel Sink Table, Right Bowl, Faucet and Drain Basket

SKU44302 BrandOmcan

The Omcan 44302 Sink Table

This Omcan sink table fits a working prep sink into a 72 x 24 inch footprint. The bowl at the right end measures 14 x 16 inches at 10 inches deep. It also arrives ready to plumb: a low lead deck-mounted faucet and a 3-1/2 inch drain basket come with the table. Construction is 18 gauge 430 stainless steel from the top and 6 inch backsplash down to the undershelf and hat channel, the work surface stands at 34 inches, and the table carries up to 1133 pounds. The top, undershelf and four legs ship knocked down and go together on site with 16 screws, so plan the water and waste rough-in at the right end before setup day.

Low Lead Faucet and Drain Basket Included

The included faucet is a deck-mounted, low lead fixture, item 44719, model FD-4-10LL. It lands in two 1 inch holes punched on 4 inch centers behind the bowl, with the first hole 9-1/2 inches in from the right end. The 3-1/2 inch drain basket fits the 3-1/2 inch drain opening in the bowl.

14 by 16 Inch Sink Bowl

The bowl sits 4-1/2 inches in from the right end of the top and runs 16 inches front to back on the 24 inch deep surface, leaving the rest of the 72 inch top as open work space. The bowl is 10 inches deep with a 3-1/2 inch drain opening.

18 Gauge 430 Stainless Steel Construction

Top, backsplash, undershelf and hat channel are all 18 gauge 430 stainless steel, and the surfaces are easy to clean. The 6 inch backsplash runs the full 72 inch width along the back edge, and the top edge turns down 2 inches around the front and ends. Overall height is 40 inches with the backsplash, so check clearance under wall shelving.

Undershelf with Aluminum Corner Brackets

The stainless undershelf mounts on aluminum corner brackets and holds up to 484 pounds. The four stainless steel legs screw into the undershelf brackets and into sockets under the top, set 2-1/2 inches in from the table edges for a 67 x 19 inch leg footprint, and finish in stainless steel bullet feet. A hat channel runs under the top.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Slim 24 inch deep footprint with the sink bowl at the right end
Low lead deck-mounted faucet (Omcan item 44719) and 3.5 inch drain basket included
Two 1 inch faucet holes punched on 4 inch centers behind the bowl
Bowl set 4-1/2 inches in from the right end, with the rest of the 72 inch top left open
6 inch backsplash runs the full width of the back edge
18 gauge 430 stainless steel top, undershelf and hat channel, easy to clean
Aluminum corner brackets on the undershelf take the leg screws
Stainless steel legs, leg sockets and bullet feet
Ships knocked down as a top, undershelf, four legs and 16 screws for a three step assembly

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$894.78

Slim 24 inch deep footprint with the sink bowl at the right end

Low lead deck-mounted faucet (Omcan item 44719) and 3.5 inch drain basket included

Two 1 inch faucet holes punched on 4 inch centers behind the bowl

Bowl set 4-1/2 inches in from the right end, with the rest of the 72 inch top left open

6 inch backsplash runs the full width of the back edge

See full feature list

The Omcan 44302 Sink Table

This Omcan sink table fits a working prep sink into a 72 x 24 inch footprint. The bowl at the right end measures 14 x 16 inches at 10 inches deep. It also arrives ready to plumb: a low lead deck-mounted faucet and a 3-1/2 inch drain basket come with the table. Construction is 18 gauge 430 stainless steel from the top and 6 inch backsplash down to the undershelf and hat channel, the work surface stands at 34 inches, and the table carries up to 1133 pounds. The top, undershelf and four legs ship knocked down and go together on site with 16 screws, so plan the water and waste rough-in at the right end before setup day.

Low Lead Faucet and Drain Basket Included

The included faucet is a deck-mounted, low lead fixture, item 44719, model FD-4-10LL. It lands in two 1 inch holes punched on 4 inch centers behind the bowl, with the first hole 9-1/2 inches in from the right end. The 3-1/2 inch drain basket fits the 3-1/2 inch drain opening in the bowl.

14 by 16 Inch Sink Bowl

The bowl sits 4-1/2 inches in from the right end of the top and runs 16 inches front to back on the 24 inch deep surface, leaving the rest of the 72 inch top as open work space. The bowl is 10 inches deep with a 3-1/2 inch drain opening.

18 Gauge 430 Stainless Steel Construction

Top, backsplash, undershelf and hat channel are all 18 gauge 430 stainless steel, and the surfaces are easy to clean. The 6 inch backsplash runs the full 72 inch width along the back edge, and the top edge turns down 2 inches around the front and ends. Overall height is 40 inches with the backsplash, so check clearance under wall shelving.

Undershelf with Aluminum Corner Brackets

The stainless undershelf mounts on aluminum corner brackets and holds up to 484 pounds. The four stainless steel legs screw into the undershelf brackets and into sockets under the top, set 2-1/2 inches in from the table edges for a 67 x 19 inch leg footprint, and finish in stainless steel bullet feet. A hat channel runs under the top.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Slim 24 inch deep footprint with the sink bowl at the right end
Low lead deck-mounted faucet (Omcan item 44719) and 3.5 inch drain basket included
Two 1 inch faucet holes punched on 4 inch centers behind the bowl
Bowl set 4-1/2 inches in from the right end, with the rest of the 72 inch top left open
6 inch backsplash runs the full width of the back edge
18 gauge 430 stainless steel top, undershelf and hat channel, easy to clean
Aluminum corner brackets on the undershelf take the leg screws
Stainless steel legs, leg sockets and bullet feet
Ships knocked down as a top, undershelf, four legs and 16 screws for a three step assembly

Resources & Downloads

Omcan 44302 Specsheet

See all from Omcan

Specifications

Overall Width	72 in
Overall Depth	24 in
Work Surface Height	34 in
Overall Height with Backsplash	40 in
Backsplash Height	6 in
Top Edge Turndown	2 in
Construction	18 gauge 430 stainless steel
Sink Bowl Location	Right end
Bowl Width	14 in
Bowl Front to Back	16 in
Bowl Depth	10 in
Bowl Inset from Right End	4-1/2 in
Drain Opening	3-1/2 in
Included Faucet	Omcan 44719 (FD-4-10LL) low lead, deck mount
Drain Basket	3-1/2 in, included
Faucet Holes	2, deck mount
Faucet Hole Spacing	4 in centers
Faucet Hole Diameter	1 in
First Faucet Hole from Right End	9-1/2 in
Undershelf Material	18 gauge 430 stainless steel
Undershelf Brackets	Aluminum
Legs	4, stainless steel, with sockets
Leg Inset from Table Edge	2-1/2 in
Leg Spacing, End to End	67 in
Leg Spacing, Front to Back	19 in
Feet	Stainless steel bullet
Assembly	Knocked down, 16 screws
Table Load Capacity	1133 lb
Undershelf Load Capacity	484 lb
Weight	73 lb

Manufacturer's Warranty

6 Month

Warranty

Certifications & Approvals

NSF Approved

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 44302 Sink Table

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Slim 24 inch deep footprint with the sink bowl at the right end
Low lead deck-mounted faucet (Omcan item 44719) and 3.5 inch drain basket included
Two 1 inch faucet holes punched on 4 inch centers behind the bowl
Bowl set 4-1/2 inches in from the right end, with the rest of the 72 inch top left open
6 inch backsplash runs the full width of the back edge
18 gauge 430 stainless steel top, undershelf and hat channel, easy to clean
Aluminum corner brackets on the undershelf take the leg screws
Stainless steel legs, leg sockets and bullet feet
Ships knocked down as a top, undershelf, four legs and 16 screws for a three step assembly

See all from Omcan

Specifications

Overall Width	72 in
Overall Depth	24 in
Work Surface Height	34 in
Overall Height with Backsplash	40 in
Backsplash Height	6 in
Top Edge Turndown	2 in
Construction	18 gauge 430 stainless steel
Sink Bowl Location	Right end
Bowl Width	14 in
Bowl Front to Back	16 in
Bowl Depth	10 in
Bowl Inset from Right End	4-1/2 in
Drain Opening	3-1/2 in
Included Faucet	Omcan 44719 (FD-4-10LL) low lead, deck mount
Drain Basket	3-1/2 in, included
Faucet Holes	2, deck mount
Faucet Hole Spacing	4 in centers
Faucet Hole Diameter	1 in
First Faucet Hole from Right End	9-1/2 in
Undershelf Material	18 gauge 430 stainless steel
Undershelf Brackets	Aluminum
Legs	4, stainless steel, with sockets
Leg Inset from Table Edge	2-1/2 in
Leg Spacing, End to End	67 in
Leg Spacing, Front to Back	19 in
Feet	Stainless steel bullet
Assembly	Knocked down, 16 screws
Table Load Capacity	1133 lb
Undershelf Load Capacity	484 lb
Weight	73 lb

Manufacturer's Warranty

1/2 year

Warranty