The Omcan 44349 Work Table
This Omcan work table pairs a 96 by 30 inch stainless steel prep surface with a 4 inch backsplash, built to sit against the wall along an eight-foot run. The backsplash keeps splash off the wall behind the table. Below the top you get an undershelf with its own load rating. The work surface sits at 34 inches and the backsplash takes the overall height to 38 inches, worth checking against any wall shelving already mounted above the spot. Assembly happens on site: the legs fit into the leg clamps on the undershelf and the gussets under the top and are secured with set screws.
20-Gauge 430 Stainless Steel Top and Undershelf
The top, the undershelf and the hat channel are all 20-gauge 430 stainless steel, and the legs, sockets and bullet feet are stainless steel as well. Omcan rates the top to hold heavy equipment for kitchen preparation, and the surface is easy to clean.
4-Inch Backsplash Along the Wall
The 4 inch backsplash rises off the back edge of the top, so the table stands 38 inches overall against 34 inches at the work surface. It keeps wipe-down splash off the wall behind the table.
An Undershelf with Its Own Load Rating
Omcan rates the undershelf at 800 pounds on its own, separate from the 1,554.3 pounds the top is rated to carry, so heavy stock can go on the shelf without guessing at what it will take.
Stainless Steel Legs, Sockets, and Bullet Feet
The legs, their sockets, and the bullet feet are stainless steel. The legs stand 22-1/8 inches apart front to back, and on this 96 inch length a center pair of legs splits the span into two 44-11/16 inch bays, useful when you are planning what rolls underneath.
Site Assembly and Replacement Parts
The table goes together on site: lay the top face down, fit the legs into the corner leg clamps on the undershelf with their set screws, insert the leg and undershelf assembly into the gussets under the top, tighten the set screws, then stand the table and level it on the bullet feet. If the undershelf needs replacing after years of service, a matching shelf is listed under item 21621, sold separately. Omcan also lists a drawer for 30 inch worktables (item 24579), 5 inch casters with and without brakes (items 14395 and 47599), a galvanized leg brace for this size (item 39388) and replacement bullet feet (items 39313, 23510 and 23520).
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Wall-side prep table with a 4 inch backsplash, sized for an eight-foot wall run
-
Backsplash keeps splash off the wall behind the table
-
20 gauge 430 stainless steel top and undershelf with a stainless hat channel
-
Top rated to hold heavy equipment for kitchen prep, with a separate load rating for the undershelf
-
Stainless steel legs, sockets, and bullet feet
-
Center pair of legs splits the 96 inch span into two bays
-
Goes together on site with set screws at the leg clamps and gussets, then levels on its bullet feet
-
Stainless steel surface that is easy to clean
-
Matching replacement undershelf, item 21621, and a drawer for 30 inch worktables, item 24579, are listed separately
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Wall-side prep table with a 4 inch backsplash, sized for an eight-foot wall run
Backsplash keeps splash off the wall behind the table
20 gauge 430 stainless steel top and undershelf with a stainless hat channel
Top rated to hold heavy equipment for kitchen prep, with a separate load rating for the undershelf
Stainless steel legs, sockets, and bullet feet
The Omcan 44349 Work Table
This Omcan work table pairs a 96 by 30 inch stainless steel prep surface with a 4 inch backsplash, built to sit against the wall along an eight-foot run. The backsplash keeps splash off the wall behind the table. Below the top you get an undershelf with its own load rating. The work surface sits at 34 inches and the backsplash takes the overall height to 38 inches, worth checking against any wall shelving already mounted above the spot. Assembly happens on site: the legs fit into the leg clamps on the undershelf and the gussets under the top and are secured with set screws.
20-Gauge 430 Stainless Steel Top and Undershelf
The top, the undershelf and the hat channel are all 20-gauge 430 stainless steel, and the legs, sockets and bullet feet are stainless steel as well. Omcan rates the top to hold heavy equipment for kitchen preparation, and the surface is easy to clean.
4-Inch Backsplash Along the Wall
The 4 inch backsplash rises off the back edge of the top, so the table stands 38 inches overall against 34 inches at the work surface. It keeps wipe-down splash off the wall behind the table.
An Undershelf with Its Own Load Rating
Omcan rates the undershelf at 800 pounds on its own, separate from the 1,554.3 pounds the top is rated to carry, so heavy stock can go on the shelf without guessing at what it will take.
Stainless Steel Legs, Sockets, and Bullet Feet
The legs, their sockets, and the bullet feet are stainless steel. The legs stand 22-1/8 inches apart front to back, and on this 96 inch length a center pair of legs splits the span into two 44-11/16 inch bays, useful when you are planning what rolls underneath.
Site Assembly and Replacement Parts
The table goes together on site: lay the top face down, fit the legs into the corner leg clamps on the undershelf with their set screws, insert the leg and undershelf assembly into the gussets under the top, tighten the set screws, then stand the table and level it on the bullet feet. If the undershelf needs replacing after years of service, a matching shelf is listed under item 21621, sold separately. Omcan also lists a drawer for 30 inch worktables (item 24579), 5 inch casters with and without brakes (items 14395 and 47599), a galvanized leg brace for this size (item 39388) and replacement bullet feet (items 39313, 23510 and 23520).
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Wall-side prep table with a 4 inch backsplash, sized for an eight-foot wall run
-
Backsplash keeps splash off the wall behind the table
-
20 gauge 430 stainless steel top and undershelf with a stainless hat channel
-
Top rated to hold heavy equipment for kitchen prep, with a separate load rating for the undershelf
-
Stainless steel legs, sockets, and bullet feet
-
Center pair of legs splits the 96 inch span into two bays
-
Goes together on site with set screws at the leg clamps and gussets, then levels on its bullet feet
-
Stainless steel surface that is easy to clean
-
Matching replacement undershelf, item 21621, and a drawer for 30 inch worktables, item 24579, are listed separately
Resources & Downloads
See all from Omcan
Specifications
| Overall Width | 96 in |
| Overall Depth | 30 in |
| Work Surface Height | 34 in |
| Overall Height | 38 in |
| Backsplash Height | 4 in |
| Top Material | 430 stainless steel |
| Top Gauge | 20 gauge |
| Undershelf | Included, 20-gauge 430 stainless steel |
| Hat Channel | 20-gauge 430 stainless steel |
| Legs | Stainless steel with sockets |
| Number of Legs | 6 |
| Feet | Stainless steel bullet |
| Load Capacity | 1554.3 lb |
| Undershelf Capacity | 800 lb |
| Leg Spacing Along Length | Two 44-11/16 in bays, center to center |
| Leg Spread, Front to Back | 22-1/8 in, center to center |
| Net Weight | 106 lb |
| Replacement Undershelf | Item 21621 |
| Matching Drawer | Item 24579 |
| Assembly | Required on site, legs secured with set screws |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Wall-side prep table with a 4 inch backsplash, sized for an eight-foot wall run