The Omcan 44601 3 Bowl Underbar Sink
This Omcan underbar sink puts a three compartment wash, rinse, and sanitize line behind the bar, with three 10 x 14 inch bowls that are 10 inches deep, on a leg-mounted frame 38-1/2 inches wide. That lets a bartender wash, rinse, and sanitize glassware without leaving the bar. The work surface sits 30 inches off the floor and a 3 inch backsplash runs along the rear edge. There are no drain boards on this model; the same three compartment sink is also listed with 13 inch drainboards as item 25274 and with 19 inch drainboards as item 44627. Two 1 inch faucet holes are punched on 4 inch centers, and each bowl has a 1-1/2 inch drain opening.
Three 10 by 14 Inch Bowls at Underbar Height
Each bowl runs 10 inches wide by 14 inches front to back by 10 inches deep, with 2 inches of flat top between bowls. The overall footprint is 38-1/2 inches wide by 18-3/4 inches deep, and the unit stands 33 inches tall to the top of the backsplash.
Wash, Rinse, and Sanitize Without Leaving the Bar
Three compartments give you wash, rinse, and sanitize bowls side by side, so glassware can be run through the full sequence at the bar instead of being carried back to the kitchen.
18-Gauge 304 Stainless Steel Top, Bowls, and Back
The top, bowls, and back are 18-gauge type 304 stainless steel; the apron facing the room is 20-gauge of the same grade.
Faucet Holes on 4 Inch Centers
Two 1 inch diameter holes are punched 4 inches on center at the rear of the top, and each bowl drains through a 1-1/2 inch opening. The sink stands on four legs tied together with a cross brace.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Three compartment underbar sink for running a full wash, rinse, and sanitize cycle at the bar
-
Three 10 x 14 inch bowls, each 10 inches deep, with 2 inches of flat top between them
-
No drain boards on this model; the same sink is also listed with 13 inch drainboards (item 25274) or 19 inch drainboards (item 44627)
-
3 inch backsplash along the rear edge of the top
-
Work surface stands 30 inches off the floor, with the backsplash topping out at 33 inches
-
18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron facing the room
-
Two 1 inch faucet holes on 4 inch centers at the rear of the top
-
1-1/2 inch drain opening in each bowl
-
Four legs joined by a cross brace
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Three compartment underbar sink for running a full wash, rinse, and sanitize cycle at the bar
Three 10 x 14 inch bowls, each 10 inches deep, with 2 inches of flat top between them
No drain boards on this model; the same sink is also listed with 13 inch drainboards (item 25274) or 19 inch drainboards (item 44627)
3 inch backsplash along the rear edge of the top
Work surface stands 30 inches off the floor, with the backsplash topping out at 33 inches
The Omcan 44601 3 Bowl Underbar Sink
This Omcan underbar sink puts a three compartment wash, rinse, and sanitize line behind the bar, with three 10 x 14 inch bowls that are 10 inches deep, on a leg-mounted frame 38-1/2 inches wide. That lets a bartender wash, rinse, and sanitize glassware without leaving the bar. The work surface sits 30 inches off the floor and a 3 inch backsplash runs along the rear edge. There are no drain boards on this model; the same three compartment sink is also listed with 13 inch drainboards as item 25274 and with 19 inch drainboards as item 44627. Two 1 inch faucet holes are punched on 4 inch centers, and each bowl has a 1-1/2 inch drain opening.
Three 10 by 14 Inch Bowls at Underbar Height
Each bowl runs 10 inches wide by 14 inches front to back by 10 inches deep, with 2 inches of flat top between bowls. The overall footprint is 38-1/2 inches wide by 18-3/4 inches deep, and the unit stands 33 inches tall to the top of the backsplash.
Wash, Rinse, and Sanitize Without Leaving the Bar
Three compartments give you wash, rinse, and sanitize bowls side by side, so glassware can be run through the full sequence at the bar instead of being carried back to the kitchen.
18-Gauge 304 Stainless Steel Top, Bowls, and Back
The top, bowls, and back are 18-gauge type 304 stainless steel; the apron facing the room is 20-gauge of the same grade.
Faucet Holes on 4 Inch Centers
Two 1 inch diameter holes are punched 4 inches on center at the rear of the top, and each bowl drains through a 1-1/2 inch opening. The sink stands on four legs tied together with a cross brace.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Three compartment underbar sink for running a full wash, rinse, and sanitize cycle at the bar
-
Three 10 x 14 inch bowls, each 10 inches deep, with 2 inches of flat top between them
-
No drain boards on this model; the same sink is also listed with 13 inch drainboards (item 25274) or 19 inch drainboards (item 44627)
-
3 inch backsplash along the rear edge of the top
-
Work surface stands 30 inches off the floor, with the backsplash topping out at 33 inches
-
18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron facing the room
-
Two 1 inch faucet holes on 4 inch centers at the rear of the top
-
1-1/2 inch drain opening in each bowl
-
Four legs joined by a cross brace
Resources & Downloads
See all from Omcan
Specifications
| Number of Compartments | 3 |
| Bowl Size | 10 x 14 in |
| Bowl Depth | 10 in |
| Bowl Spacing | 2 in |
| Drain Boards | None |
| Drain Opening Diameter | 1-1/2 in |
| Backsplash Height | 3 in |
| Faucet Holes | 2 |
| Faucet Hole Diameter | 1 in |
| Faucet Hole Spacing | 4 in centers |
| Material | 18-gauge 304 stainless steel |
| Apron Material | 20-gauge 304 stainless steel |
| Legs | 4, with cross brace |
| Work Surface Height | 30 in |
| Overall Width | 38-1/2 in |
| Overall Depth | 18-3/4 in |
| Overall Height | 33 in |
| Front Leg Spread | 36-3/16 in |
| Side Leg Spread | 16-7/16 in |
| Weight | 57.2 lb |
Manufacturer's Warranty
-
6 Month
Warranty
Three compartment underbar sink for running a full wash, rinse, and sanitize cycle at the bar