Skip to content

Omcan 44603 72 In. Four Compartment Underbar Sink, Two 13 In. Drain Boards, Four Faucet Holes

SKU44603 BrandOmcan

The Omcan 44603 4 Bowl Underbar Sink

This Omcan underbar sink packs four 10 x 14 inch bowls and two 13 inch drain boards into a 72 inch run, for washing, rinsing, and sanitizing glassware at the bar. Each bowl is 10 inches deep. The work surface sits 30 inches off the floor, the overall height with the 3 inch backsplash is 33 inches, and the unit is 18 3/4 inches front to back. Two separate pairs of faucet holes are punched in the back, one pair at each end of the bowl run. At six feet wide it takes a dedicated stretch of underbar, so measure the run before you commit the space.

Four 10 by 14 Inch Bowls at Underbar Height

Four compartments, each 10 inches wide by 14 inches front to back by 10 inches deep, sit in a row with 2 inches of flat top between them. Each bowl has a 1 1/2 inch drain opening, and the bowls start 2 inches in from the back edge of the top.

Drain Boards on Both Sides of the Bowls

A 13 inch drain board on each end flanks the four bowls, giving glassware a place to land on either side of the wash line. The top has a 3 inch backsplash along the back edge.

Two Pairs of Faucet Holes on 4 Inch Centers

Two separate pairs of 1 inch diameter holes are punched in the back, each pair on 4 inch centers, so the sink can take two faucets, one over each end of the bowl run. No faucet is pictured with the sink.

18-Gauge 304 Stainless Steel Top, Bowls, and Back

The top, bowls, and back are 18-gauge type 304 stainless steel, with a 20-gauge type 304 stainless steel apron facing the room. The sink stands on four legs with bullet feet, set 69 11/16 inches apart across the front and 16 7/16 inches apart side to side, and weighs 85.8 pounds.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. Four compartment underbar sink for washing, rinsing, and sanitizing glassware
  2. Four 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
  3. 13 inch drain boards on both ends of the bowl run
  4. Two pairs of 1 inch faucet holes on 4 inch centers, one pair at each end of the bowls
  5. 3 inch backsplash along the back edge of the top
  6. Work surface at 30 inches, 33 inches overall with the backsplash
  7. 18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron
  8. Four legs with bullet feet

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,446.36
  • Four compartment underbar sink for washing, rinsing, and sanitizing glassware
  • Four 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
  • 13 inch drain boards on both ends of the bowl run
  • Two pairs of 1 inch faucet holes on 4 inch centers, one pair at each end of the bowls
  • 3 inch backsplash along the back edge of the top
  • See full feature list

    The Omcan 44603 4 Bowl Underbar Sink

    This Omcan underbar sink packs four 10 x 14 inch bowls and two 13 inch drain boards into a 72 inch run, for washing, rinsing, and sanitizing glassware at the bar. Each bowl is 10 inches deep. The work surface sits 30 inches off the floor, the overall height with the 3 inch backsplash is 33 inches, and the unit is 18 3/4 inches front to back. Two separate pairs of faucet holes are punched in the back, one pair at each end of the bowl run. At six feet wide it takes a dedicated stretch of underbar, so measure the run before you commit the space.

    Four 10 by 14 Inch Bowls at Underbar Height

    Four compartments, each 10 inches wide by 14 inches front to back by 10 inches deep, sit in a row with 2 inches of flat top between them. Each bowl has a 1 1/2 inch drain opening, and the bowls start 2 inches in from the back edge of the top.

    Drain Boards on Both Sides of the Bowls

    A 13 inch drain board on each end flanks the four bowls, giving glassware a place to land on either side of the wash line. The top has a 3 inch backsplash along the back edge.

    Two Pairs of Faucet Holes on 4 Inch Centers

    Two separate pairs of 1 inch diameter holes are punched in the back, each pair on 4 inch centers, so the sink can take two faucets, one over each end of the bowl run. No faucet is pictured with the sink.

    18-Gauge 304 Stainless Steel Top, Bowls, and Back

    The top, bowls, and back are 18-gauge type 304 stainless steel, with a 20-gauge type 304 stainless steel apron facing the room. The sink stands on four legs with bullet feet, set 69 11/16 inches apart across the front and 16 7/16 inches apart side to side, and weighs 85.8 pounds.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. Four compartment underbar sink for washing, rinsing, and sanitizing glassware
    2. Four 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
    3. 13 inch drain boards on both ends of the bowl run
    4. Two pairs of 1 inch faucet holes on 4 inch centers, one pair at each end of the bowls
    5. 3 inch backsplash along the back edge of the top
    6. Work surface at 30 inches, 33 inches overall with the backsplash
    7. 18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron
    8. Four legs with bullet feet

    Resources & Downloads

    See all from Omcan

    Specifications

    Number of Compartments4
    Bowl Size10 x 14 in
    Bowl Depth10 in
    Bowl Spacing2 in
    Drain Opening Diameter1-1/2 in
    Drain BoardsTwo, left and right
    Drain Board Width13 in each
    Backsplash Height3 in
    Faucet Holes4, in two pairs
    Faucet Hole Diameter1 in
    Faucet Hole Spacing4 in centers per pair
    Material18-gauge 304 stainless steel
    Apron Material20-gauge 304 stainless steel
    LegsFour, with bullet feet
    Work Surface Height30 in
    Overall Width72 in
    Overall Depth18-3/4 in
    Overall Height33 in
    Front Leg Spread69-11/16 in
    Side Leg Spread16-7/16 in
    Weight85.8 lb

    Manufacturer's Warranty

    • 6 Month

      Warranty

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 44603 4 Bowl Underbar Sink

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. Four compartment underbar sink for washing, rinsing, and sanitizing glassware
    2. Four 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
    3. 13 inch drain boards on both ends of the bowl run
    4. Two pairs of 1 inch faucet holes on 4 inch centers, one pair at each end of the bowls
    5. 3 inch backsplash along the back edge of the top
    6. Work surface at 30 inches, 33 inches overall with the backsplash
    7. 18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron
    8. Four legs with bullet feet

    See all from Omcan

    Specifications

    Number of Compartments4
    Bowl Size10 x 14 in
    Bowl Depth10 in
    Bowl Spacing2 in
    Drain Opening Diameter1-1/2 in
    Drain BoardsTwo, left and right
    Drain Board Width13 in each
    Backsplash Height3 in
    Faucet Holes4, in two pairs
    Faucet Hole Diameter1 in
    Faucet Hole Spacing4 in centers per pair
    Material18-gauge 304 stainless steel
    Apron Material20-gauge 304 stainless steel
    LegsFour, with bullet feet
    Work Surface Height30 in
    Overall Width72 in
    Overall Depth18-3/4 in
    Overall Height33 in
    Front Leg Spread69-11/16 in
    Side Leg Spread16-7/16 in
    Weight85.8 lb

    Manufacturer's Warranty

      1/2 year

      Warranty

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch