Omcan 44627 72 In. Three Compartment Underbar Sink, Two 19 In. Drain Boards, 3 In. Backsplash

SKU44627 BrandOmcan

The Omcan 44627 3 Bowl Underbar Sink

This Omcan underbar sink runs a full six feet along the back bar and pairs three 10 x 14 inch bowls with a 19 inch drain board on each side, so glassware has a place to land on both sides of the bowls. Each bowl is 10 inches deep, and the three-bowl line is built for washing, rinsing, and sanitizing glassware. The work surface sits 30 inches off the floor, the 3 inch backsplash brings the overall height to 33 inches, and the unit is 18 3/4 inches front to back. At 72 inches wide it wants a dedicated run, so measure the underbar stretch before committing. Two faucet holes come punched on 4 inch centers.

Three 10 by 14 Inch Bowls at Underbar Height

The bowls each run 10 inches wide by 14 inches front to back by 10 inches deep, with 2 inches of flat top between them. Each bowl has a 1 1/2 inch drain opening, and the bowls start 2 inches in from the back edge of the top.

Drain Boards on Both Sides of the Bowls

A 19 inch drain board on the left and a matching 19 inch board on the right flank the three bowls, so glassware can be set down on either side of the wash line. The top carries a 3 inch backsplash along the back edge.

18-Gauge 304 Stainless Steel Top, Bowls, and Back

The top, bowls, and back are 18-gauge type 304 stainless steel, with a 20-gauge type 304 stainless steel apron facing the room. The sink stands on four legs with bullet feet, set 69 11/16 inches apart across the front and 16 7/16 inches apart side to side, and weighs 83.6 pounds.

Faucet Holes on 4 Inch Centers

Two 1 inch diameter holes are punched 4 inches on center in the back above the bowls. No faucet is pictured with the sink.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Three compartment underbar sink for washing, rinsing, and sanitizing glassware
Three 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
19 inch drain boards on both ends of the bowl run
Two 1 inch faucet holes punched on 4 inch centers above the bowls
3 inch backsplash along the back edge of the top
Work surface at 30 inches, 33 inches overall with the backsplash
18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron
Four legs with bullet feet

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,316.20

Three compartment underbar sink for washing, rinsing, and sanitizing glassware

Three 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening

19 inch drain boards on both ends of the bowl run

Two 1 inch faucet holes punched on 4 inch centers above the bowls

3 inch backsplash along the back edge of the top

See full feature list

The Omcan 44627 3 Bowl Underbar Sink

This Omcan underbar sink runs a full six feet along the back bar and pairs three 10 x 14 inch bowls with a 19 inch drain board on each side, so glassware has a place to land on both sides of the bowls. Each bowl is 10 inches deep, and the three-bowl line is built for washing, rinsing, and sanitizing glassware. The work surface sits 30 inches off the floor, the 3 inch backsplash brings the overall height to 33 inches, and the unit is 18 3/4 inches front to back. At 72 inches wide it wants a dedicated run, so measure the underbar stretch before committing. Two faucet holes come punched on 4 inch centers.

Three 10 by 14 Inch Bowls at Underbar Height

The bowls each run 10 inches wide by 14 inches front to back by 10 inches deep, with 2 inches of flat top between them. Each bowl has a 1 1/2 inch drain opening, and the bowls start 2 inches in from the back edge of the top.

Drain Boards on Both Sides of the Bowls

A 19 inch drain board on the left and a matching 19 inch board on the right flank the three bowls, so glassware can be set down on either side of the wash line. The top carries a 3 inch backsplash along the back edge.

18-Gauge 304 Stainless Steel Top, Bowls, and Back

The top, bowls, and back are 18-gauge type 304 stainless steel, with a 20-gauge type 304 stainless steel apron facing the room. The sink stands on four legs with bullet feet, set 69 11/16 inches apart across the front and 16 7/16 inches apart side to side, and weighs 83.6 pounds.

Faucet Holes on 4 Inch Centers

Two 1 inch diameter holes are punched 4 inches on center in the back above the bowls. No faucet is pictured with the sink.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Three compartment underbar sink for washing, rinsing, and sanitizing glassware
Three 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
19 inch drain boards on both ends of the bowl run
Two 1 inch faucet holes punched on 4 inch centers above the bowls
3 inch backsplash along the back edge of the top
Work surface at 30 inches, 33 inches overall with the backsplash
18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron
Four legs with bullet feet

Resources & Downloads

Omcan 44627 Specsheet

See all from Omcan

Specifications

Number of Compartments	3
Bowl Size	10 x 14 in
Bowl Depth	10 in
Bowl Spacing	2 in
Drain Opening Diameter	1-1/2 in
Drain Boards	Two, left and right
Drain Board Width	19 in each
Backsplash Height	3 in
Faucet Holes	2
Faucet Hole Diameter	1 in
Faucet Hole Spacing	4 in centers
Material	18-gauge 304 stainless steel
Apron Material	20-gauge 304 stainless steel
Legs	Four, with bullet feet
Work Surface Height	30 in
Overall Width	72 in
Overall Depth	18-3/4 in
Overall Height	33 in
Front Leg Spread	69-11/16 in
Side Leg Spread	16-7/16 in
Weight	83.6 lb

Manufacturer's Warranty

6 Month

Warranty

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 44627 3 Bowl Underbar Sink

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Three compartment underbar sink for washing, rinsing, and sanitizing glassware
Three 10 x 14 inch bowls, each 10 inches deep with a 1 1/2 inch drain opening
19 inch drain boards on both ends of the bowl run
Two 1 inch faucet holes punched on 4 inch centers above the bowls
3 inch backsplash along the back edge of the top
Work surface at 30 inches, 33 inches overall with the backsplash
18 gauge type 304 stainless steel top, bowls, and back with a 20 gauge type 304 apron
Four legs with bullet feet

See all from Omcan

Specifications

Number of Compartments	3
Bowl Size	10 x 14 in
Bowl Depth	10 in
Bowl Spacing	2 in
Drain Opening Diameter	1-1/2 in
Drain Boards	Two, left and right
Drain Board Width	19 in each
Backsplash Height	3 in
Faucet Holes	2
Faucet Hole Diameter	1 in
Faucet Hole Spacing	4 in centers
Material	18-gauge 304 stainless steel
Apron Material	20-gauge 304 stainless steel
Legs	Four, with bullet feet
Work Surface Height	30 in
Overall Width	72 in
Overall Depth	18-3/4 in
Overall Height	33 in
Front Leg Spread	69-11/16 in
Side Leg Spread	16-7/16 in
Weight	83.6 lb

Manufacturer's Warranty

1/2 year

Warranty