Skip to content
Request Quote Check Order Status Financing About Us Contact Us

Omcan 45154 24 x 108 In. Stainless Steel Work Table, 430 Flat Top, Undershelf

SKU45154 BrandOmcan
Omcan 45154 24 x 108 In. Stainless Steel Work Table, 430 Flat Top, Undershelf

The Omcan 45154 Work Table

This Omcan work table runs a full nine feet, a 108 by 24 inch all-stainless prep surface with a matching undershelf below. Top, undershelf, hat channel, legs, sockets, and bullet feet are all 20-gauge 430 stainless steel. The flat top has no backsplash, and the surface sits at 34 inches. Assembly happens on site, with each leg seating in a socket under the top and secured with a single set screw.

20-Gauge 430 Stainless Steel Top over a Hat Channel

The top is 20-gauge 430 stainless steel with a stainless steel hat channel beneath it, and the support channels under the table are bolt-secured with acorn nuts. Omcan rates the table for 1,510.2 pounds, and the stainless surface is easy to clean.

Flat Top with No Backsplash

The top is flat with no backsplash, 24 inches deep by 108 inches long at a 34 inch height. Omcan lists the same table in a 30 inch depth as item 45155.

Stainless Steel Undershelf on V-Pipe Supports

The undershelf matches the top in 20-gauge 430 stainless steel. It is carried on welded V-pipe supports, and the support channels bolt to the table with acorn nuts.

Six Stainless Steel Legs with Bullet Feet

Six socketed stainless steel legs carry the span, each secured with a single set screw and finished with a stainless steel bullet foot. Replacement stainless steel bullet feet are listed as item 39313, with plastic (item 23510) and adjustable (item 23520) feet also available, and 5 inch casters with and without brakes are listed as items 14395 and 47599.

Socket Assembly at the Install Point

The table goes together where it will live: each of the six legs seats in its socket under the top and is locked with its single set screw, then the table stands on its bullet feet.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. Nine-foot all-stainless prep run, 108 inches long by 24 inches deep
  2. 20 gauge 430 stainless steel top that is easy to clean
  3. Flat top with no backsplash, with a 30 inch deep version listed as item 45155
  4. Stainless steel undershelf carried on welded V-pipe supports
  5. Bolt-secured support channels with acorn nuts
  6. Undershelf, hat channel, legs, sockets, and feet are all stainless steel
  7. Six socketed legs, each secured by a single set screw and finished with a stainless steel bullet foot
  8. Replacement bullet feet and 5 inch casters are listed as accessories

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$642.23
  • Nine-foot all-stainless prep run, 108 inches long by 24 inches deep
  • 20 gauge 430 stainless steel top that is easy to clean
  • Flat top with no backsplash, with a 30 inch deep version listed as item 45155
  • Stainless steel undershelf carried on welded V-pipe supports
  • Bolt-secured support channels with acorn nuts
    • See full feature list

    The Omcan 45154 Work Table

    This Omcan work table runs a full nine feet, a 108 by 24 inch all-stainless prep surface with a matching undershelf below. Top, undershelf, hat channel, legs, sockets, and bullet feet are all 20-gauge 430 stainless steel. The flat top has no backsplash, and the surface sits at 34 inches. Assembly happens on site, with each leg seating in a socket under the top and secured with a single set screw.

    20-Gauge 430 Stainless Steel Top over a Hat Channel

    The top is 20-gauge 430 stainless steel with a stainless steel hat channel beneath it, and the support channels under the table are bolt-secured with acorn nuts. Omcan rates the table for 1,510.2 pounds, and the stainless surface is easy to clean.

    Flat Top with No Backsplash

    The top is flat with no backsplash, 24 inches deep by 108 inches long at a 34 inch height. Omcan lists the same table in a 30 inch depth as item 45155.

    Stainless Steel Undershelf on V-Pipe Supports

    The undershelf matches the top in 20-gauge 430 stainless steel. It is carried on welded V-pipe supports, and the support channels bolt to the table with acorn nuts.

    Six Stainless Steel Legs with Bullet Feet

    Six socketed stainless steel legs carry the span, each secured with a single set screw and finished with a stainless steel bullet foot. Replacement stainless steel bullet feet are listed as item 39313, with plastic (item 23510) and adjustable (item 23520) feet also available, and 5 inch casters with and without brakes are listed as items 14395 and 47599.

    Socket Assembly at the Install Point

    The table goes together where it will live: each of the six legs seats in its socket under the top and is locked with its single set screw, then the table stands on its bullet feet.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. Nine-foot all-stainless prep run, 108 inches long by 24 inches deep
    2. 20 gauge 430 stainless steel top that is easy to clean
    3. Flat top with no backsplash, with a 30 inch deep version listed as item 45155
    4. Stainless steel undershelf carried on welded V-pipe supports
    5. Bolt-secured support channels with acorn nuts
    6. Undershelf, hat channel, legs, sockets, and feet are all stainless steel
    7. Six socketed legs, each secured by a single set screw and finished with a stainless steel bullet foot
    8. Replacement bullet feet and 5 inch casters are listed as accessories

    Resources & Downloads

    See all from Omcan

    Specifications

    Overall Width108 in
    Overall Depth24 in
    Overall Height34 in
    Top StyleFlat, no backsplash
    Top Material430 stainless steel
    Top Gauge20 gauge
    UndershelfIncluded, 20-gauge 430 stainless steel
    Undershelf SupportsWelded V-pipe
    Support ChannelsBolt-secured with acorn nuts
    Hat Channel20-gauge 430 stainless steel
    Number of Legs6
    LegsStainless steel with sockets
    Leg AttachmentSocket with single set screw
    FeetStainless steel bullet
    Load Capacity1510.2 lb
    30 Inch Deep VersionItem 45155
    AssemblyRequired on site

    Manufacturer's Warranty

    • 6 Month

      Warranty

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 45154 Work Table

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. Nine-foot all-stainless prep run, 108 inches long by 24 inches deep
    2. 20 gauge 430 stainless steel top that is easy to clean
    3. Flat top with no backsplash, with a 30 inch deep version listed as item 45155
    4. Stainless steel undershelf carried on welded V-pipe supports
    5. Bolt-secured support channels with acorn nuts
    6. Undershelf, hat channel, legs, sockets, and feet are all stainless steel
    7. Six socketed legs, each secured by a single set screw and finished with a stainless steel bullet foot
    8. Replacement bullet feet and 5 inch casters are listed as accessories

    See all from Omcan

    Specifications

    Overall Width108 in
    Overall Depth24 in
    Overall Height34 in
    Top StyleFlat, no backsplash
    Top Material430 stainless steel
    Top Gauge20 gauge
    UndershelfIncluded, 20-gauge 430 stainless steel
    Undershelf SupportsWelded V-pipe
    Support ChannelsBolt-secured with acorn nuts
    Hat Channel20-gauge 430 stainless steel
    Number of Legs6
    LegsStainless steel with sockets
    Leg AttachmentSocket with single set screw
    FeetStainless steel bullet
    Load Capacity1510.2 lb
    30 Inch Deep VersionItem 45155
    AssemblyRequired on site

    Manufacturer's Warranty

      1/2 year

      Warranty

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch