The Omcan 45155 Work Table
This Omcan work table is the biggest footprint in the line, a 108 by 30 inch all-stainless prep surface with an undershelf underneath. Top, undershelf, hat channel, legs, sockets, and bullet feet are all 20-gauge 430 stainless steel. The flat top carries no backsplash, and the surface sits at a 34 inch working height. Before you commit, measure the wall run, the aisle clearance in front, and the doorways on the delivery path for a nine-foot table. Assembly happens on site, each of the six legs fitting a socket under the top and locking with a single set-screw.
20-Gauge 430 Stainless Steel Top over a Hat Channel
The 20-gauge 430 series stainless steel top rides on a stainless hat channel, with the support channels secured by bolts and acorn-style nuts for added stability. The top is a durable, easy-to-clean surface for food prep and daily tasks, and the table is built to hold heavy equipment.
Flat Top with No Backsplash
With no backsplash, the table is not tied to a wall and can butt against a neighboring flat-top to extend the run. If the spot needs the wall protected from splash, Omcan lists backsplash versions of its 24 and 30 inch deep tables in widths up to 96 inches; the flat edge here is for layouts that need flexibility.
Undershelf for Storage
The undershelf matches the top in 20-gauge 430 stainless steel and offers convenient storage below the work surface. It is reinforced with welded V-pipe leg supports for extra strength.
Six Stainless Steel Legs with Bullet Feet
Six stainless steel legs carry the table, each on a bullet foot that levels on uneven floors, with a published load capacity of 1,510.2 pounds (685 kg). Omcan offers 5 inch casters with brake (item 14395) and without (item 47599) for this table, along with a drawer for 30 inch worktables (item 24579).
Socket Assembly at the Install Point
The table assembles where it will live: fit each of the six legs into its socket, lock each with its single set-screw, stand the table upright, and level the bullet feet. Omcan rates the installation as easy.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Nine-foot, 30 inch deep prep run, the largest size in Omcan's all stainless steel worktable line
-
20 gauge 430 stainless steel top is durable and easy to clean
-
Flat top with no backsplash butts flush against neighboring tables
-
Undershelf offers convenient storage below the work surface
-
Undershelf rides on welded V-pipe supports, with support channels bolted to acorn nuts
-
Undershelf, hat channel, legs, sockets, and feet are all 20 gauge 430 stainless steel
-
Six legs, each secured by a single set-screw and finished with a bullet foot that levels on uneven floors
-
Legs fit into sockets on site for easy installation
-
Optional 5 inch casters with brake (item 14395) or without (item 47599) and a drawer for 30 inch worktables (item 24579)
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Nine-foot, 30 inch deep prep run, the largest size in Omcan's all stainless steel worktable line
20 gauge 430 stainless steel top is durable and easy to clean
Flat top with no backsplash butts flush against neighboring tables
Undershelf offers convenient storage below the work surface
Undershelf rides on welded V-pipe supports, with support channels bolted to acorn nuts
The Omcan 45155 Work Table
This Omcan work table is the biggest footprint in the line, a 108 by 30 inch all-stainless prep surface with an undershelf underneath. Top, undershelf, hat channel, legs, sockets, and bullet feet are all 20-gauge 430 stainless steel. The flat top carries no backsplash, and the surface sits at a 34 inch working height. Before you commit, measure the wall run, the aisle clearance in front, and the doorways on the delivery path for a nine-foot table. Assembly happens on site, each of the six legs fitting a socket under the top and locking with a single set-screw.
20-Gauge 430 Stainless Steel Top over a Hat Channel
The 20-gauge 430 series stainless steel top rides on a stainless hat channel, with the support channels secured by bolts and acorn-style nuts for added stability. The top is a durable, easy-to-clean surface for food prep and daily tasks, and the table is built to hold heavy equipment.
Flat Top with No Backsplash
With no backsplash, the table is not tied to a wall and can butt against a neighboring flat-top to extend the run. If the spot needs the wall protected from splash, Omcan lists backsplash versions of its 24 and 30 inch deep tables in widths up to 96 inches; the flat edge here is for layouts that need flexibility.
Undershelf for Storage
The undershelf matches the top in 20-gauge 430 stainless steel and offers convenient storage below the work surface. It is reinforced with welded V-pipe leg supports for extra strength.
Six Stainless Steel Legs with Bullet Feet
Six stainless steel legs carry the table, each on a bullet foot that levels on uneven floors, with a published load capacity of 1,510.2 pounds (685 kg). Omcan offers 5 inch casters with brake (item 14395) and without (item 47599) for this table, along with a drawer for 30 inch worktables (item 24579).
Socket Assembly at the Install Point
The table assembles where it will live: fit each of the six legs into its socket, lock each with its single set-screw, stand the table upright, and level the bullet feet. Omcan rates the installation as easy.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Nine-foot, 30 inch deep prep run, the largest size in Omcan's all stainless steel worktable line
-
20 gauge 430 stainless steel top is durable and easy to clean
-
Flat top with no backsplash butts flush against neighboring tables
-
Undershelf offers convenient storage below the work surface
-
Undershelf rides on welded V-pipe supports, with support channels bolted to acorn nuts
-
Undershelf, hat channel, legs, sockets, and feet are all 20 gauge 430 stainless steel
-
Six legs, each secured by a single set-screw and finished with a bullet foot that levels on uneven floors
-
Legs fit into sockets on site for easy installation
-
Optional 5 inch casters with brake (item 14395) or without (item 47599) and a drawer for 30 inch worktables (item 24579)
Resources & Downloads
See all from Omcan
Specifications
| Overall Width | 108 in (2743.2 mm) |
| Overall Depth | 30 in (762 mm) |
| Overall Height | 34 in (864 mm) |
| Top Style | Flat, no backsplash |
| Top Material | 430 stainless steel |
| Top Gauge | 20 gauge |
| Undershelf | Included, 20-gauge 430 stainless steel |
| Undershelf Supports | Welded V-pipe |
| Support Channel Fastening | Bolts with acorn nuts |
| Hat Channel | Stainless steel |
| Number of Legs | 6 |
| Legs | Stainless steel with sockets, single set-screw |
| Feet | Stainless steel bullet |
| Load Capacity | 1510.2 lb (685 kg) |
| Assembly | Required, legs fit sockets on site |
| Optional Caster with Brake, 5 In. | 14395 |
| Optional Caster without Brake, 5 In. | 47599 |
| Optional Drawer for 30 In. Worktables | 24579 |
| 24 In. Deep Version, 24 x 108 In. | 45154 |
Manufacturer's Warranty
-
6 Month
Warranty
Certifications & Approvals
-
NSF Approved
Nine-foot, 30 inch deep prep run, the largest size in Omcan's all stainless steel worktable line