Omcan 45284 48 In. Cabinet Base Work Table, Sliding Doors, 3 Drawers, 430 Stainless Steel Top, 6 In. Backsplash

SKU45284 BrandOmcan

The Omcan 45284 Work Table

This Omcan work table adds a bank of three drawers to an enclosed sliding-door cabinet under a 48 inch wide, 30 inch deep stainless steel prep counter. The work surface sits at 36 inches and the 6 inch backsplash carries the overall height to 42 inches against the wall. The drawer bank takes a 12 inch section at the right end of the cabinet, and the rest of the base is cabinet space behind sliding doors for mixing bowls, containers and other kitchen preparation supplies.

Enclosed Cabinet with Sliding Doors and a Three-Drawer Bank

Three drawers stack in a 12 inch wide bank at the right end of the cabinet, each with a drawer front 7.53 inches tall and a recessed pull. The rest of the base is enclosed cabinet behind sliding doors with recessed pulls. The stainless steel legs stand 42-7/8 inches apart side to side and 23-1/2 inches apart front to back.

16-Gauge 430 Stainless Steel Top over an 18-Gauge Body

The top shelf is 16-gauge 430 stainless steel, 1-1/2 inches thick at the edge. The hat channel, back, sides, bottom and intermediate shelf are 18-gauge 430 stainless steel, and the table is very easy to clean.

6-Inch Backsplash with a 2-Inch Return

The 6 inch backsplash rises off the back edge of the top and turns forward in a 2 inch return with a 3/4 inch radius.

Intermediate Shelf Inside the Cabinet

A 1-1/2 inch thick intermediate shelf splits the door side of the cabinet into two storage levels. Like the hat channel, back, sides and bottom, the shelf is 18-gauge 430 stainless steel.

Stainless Steel Legs with Bullet Feet

Stainless steel legs with bullet feet carry the cabinet and ensure maximum stability. The legs hold the cabinet 6 inches off the floor, with 1-1/2 inch bullet feet at the bottom.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Drawer-equipped prep and storage work table with a 48 x 30 inch top
Three drawers in a 12 inch wide bank at the right end of the cabinet, each with a recessed pull
Enclosed cabinet with sliding doors for mixing bowls, containers and other kitchen preparation supplies
16-gauge 430 stainless steel top shelf with 6 inch backsplash
18-gauge 430 stainless steel hat channel, back, side, bottom and intermediate shelf
Backsplash finished with a 2 inch return on a 3/4 inch radius
Intermediate shelf adds a second storage level behind the doors
Stainless steel legs and bullet feet for maximum stability

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$1,630.83

Drawer-equipped prep and storage work table with a 48 x 30 inch top

Three drawers in a 12 inch wide bank at the right end of the cabinet, each with a recessed pull

Enclosed cabinet with sliding doors for mixing bowls, containers and other kitchen preparation supplies

16-gauge 430 stainless steel top shelf with 6 inch backsplash

18-gauge 430 stainless steel hat channel, back, side, bottom and intermediate shelf

See full feature list

The Omcan 45284 Work Table

This Omcan work table adds a bank of three drawers to an enclosed sliding-door cabinet under a 48 inch wide, 30 inch deep stainless steel prep counter. The work surface sits at 36 inches and the 6 inch backsplash carries the overall height to 42 inches against the wall. The drawer bank takes a 12 inch section at the right end of the cabinet, and the rest of the base is cabinet space behind sliding doors for mixing bowls, containers and other kitchen preparation supplies.

Enclosed Cabinet with Sliding Doors and a Three-Drawer Bank

Three drawers stack in a 12 inch wide bank at the right end of the cabinet, each with a drawer front 7.53 inches tall and a recessed pull. The rest of the base is enclosed cabinet behind sliding doors with recessed pulls. The stainless steel legs stand 42-7/8 inches apart side to side and 23-1/2 inches apart front to back.

16-Gauge 430 Stainless Steel Top over an 18-Gauge Body

The top shelf is 16-gauge 430 stainless steel, 1-1/2 inches thick at the edge. The hat channel, back, sides, bottom and intermediate shelf are 18-gauge 430 stainless steel, and the table is very easy to clean.

6-Inch Backsplash with a 2-Inch Return

The 6 inch backsplash rises off the back edge of the top and turns forward in a 2 inch return with a 3/4 inch radius.

Intermediate Shelf Inside the Cabinet

A 1-1/2 inch thick intermediate shelf splits the door side of the cabinet into two storage levels. Like the hat channel, back, sides and bottom, the shelf is 18-gauge 430 stainless steel.

Stainless Steel Legs with Bullet Feet

Stainless steel legs with bullet feet carry the cabinet and ensure maximum stability. The legs hold the cabinet 6 inches off the floor, with 1-1/2 inch bullet feet at the bottom.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

Drawer-equipped prep and storage work table with a 48 x 30 inch top
Three drawers in a 12 inch wide bank at the right end of the cabinet, each with a recessed pull
Enclosed cabinet with sliding doors for mixing bowls, containers and other kitchen preparation supplies
16-gauge 430 stainless steel top shelf with 6 inch backsplash
18-gauge 430 stainless steel hat channel, back, side, bottom and intermediate shelf
Backsplash finished with a 2 inch return on a 3/4 inch radius
Intermediate shelf adds a second storage level behind the doors
Stainless steel legs and bullet feet for maximum stability

Resources & Downloads

Omcan 45284 Specsheet

See all from Omcan

Specifications

Overall Width	48 in
Overall Depth	30 in
Work Surface Height	36 in
Overall Height with Backsplash	42 in
Backsplash Height	6 in
Backsplash Return	2 in, 3/4 in radius
Top Material	430 stainless steel
Top Gauge	16 gauge
Top Edge Thickness	1-1/2 in
Body Material	430 stainless steel
Body Gauge	18 gauge
Base	Enclosed cabinet
Doors	Sliding, recessed pulls
Drawers	3
Drawer Bank Width	12 in
Drawer Front Height	7.53 in
Leg Spacing, Side to Side	42-7/8 in
Leg Spacing, Front to Back	23-1/2 in
Clearance Under Cabinet	6 in
Intermediate Shelf Thickness	1-1/2 in
Legs	Stainless steel
Feet	Stainless steel bullet feet, 1-1/2 in

Manufacturer's Warranty

6 Month

Warranty

Certifications & Approvals

NSF Approved

The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

We're excited to serve you next!

The Omcan 45284 Work Table

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Product Features

Drawer-equipped prep and storage work table with a 48 x 30 inch top
Three drawers in a 12 inch wide bank at the right end of the cabinet, each with a recessed pull
Enclosed cabinet with sliding doors for mixing bowls, containers and other kitchen preparation supplies
16-gauge 430 stainless steel top shelf with 6 inch backsplash
18-gauge 430 stainless steel hat channel, back, side, bottom and intermediate shelf
Backsplash finished with a 2 inch return on a 3/4 inch radius
Intermediate shelf adds a second storage level behind the doors
Stainless steel legs and bullet feet for maximum stability

See all from Omcan

Specifications

Overall Width	48 in
Overall Depth	30 in
Work Surface Height	36 in
Overall Height with Backsplash	42 in
Backsplash Height	6 in
Backsplash Return	2 in, 3/4 in radius
Top Material	430 stainless steel
Top Gauge	16 gauge
Top Edge Thickness	1-1/2 in
Body Material	430 stainless steel
Body Gauge	18 gauge
Base	Enclosed cabinet
Doors	Sliding, recessed pulls
Drawers	3
Drawer Bank Width	12 in
Drawer Front Height	7.53 in
Leg Spacing, Side to Side	42-7/8 in
Leg Spacing, Front to Back	23-1/2 in
Clearance Under Cabinet	6 in
Intermediate Shelf Thickness	1-1/2 in
Legs	Stainless steel
Feet	Stainless steel bullet feet, 1-1/2 in

Manufacturer's Warranty

1/2 year

Warranty