Skip to content

Omcan 46215 30 In. Talsa Bowl Cutter, 15.9 Qt, 3 HP, Variable Speed 750-3,000 RPM, 3-Knife Head, Stainless Steel

SKU46215 BrandOmcan

The Omcan 46215 Batch Bowl Food Processor

The Omcan Talsa FP-ES-0015 is a 15.9 qt bowl cutter sized for smaller batch runs where you need the same cut quality and speed control as a larger machine but don't need the 30 L capacity. It processes 9 to 26 lb of soft meat or 9 to 18 lb of tough meat per batch, which suits butcher shops, specialty sausage makers, and restaurant kitchens that produce in-house charcuterie and forcemeats in moderate quantities. The 3 hp (2,300 W) motor on 220V single-phase means you can run it anywhere you have a standard commercial outlet without requiring a three-phase panel, which opens up installations in smaller retail spaces and commissary kitchens. A 7" digital touch screen shows knife speed, product temperature, and processing time, giving you the same level of real-time batch control as the larger model.

Variable Speed 3-Knife Head, 750-3,000 RPM

The removable 3-knife head spins from 750 to 3,000 RPM with variable speed control and four preselection buttons, so you can jump between your most-used settings without dialing in from scratch every time. At the low end, 750 RPM gives you a coarse chop for chunky sausage blends where you want visible texture. At 3,000 RPM, the linear knife speed reaches 45 m/s, which emulsifies forcemeats and pâté batters into a smooth, uniform consistency that holds fat and moisture through cooking. An optional 6-knife head is available when you need faster throughput or a finer cut on the same batch size. The knife head removes without tools for sharpening and cleaning, and the motor includes electronic drive with overload protection that shuts down before you burn out the windings on a heavy load.

All Stainless Steel Construction with Solid Bowl and Lid

The bowl, lid, knife head, and machine body are all stainless steel, which matters in a USDA or health-inspected facility where every food-contact surface has to be non-porous and fully sanitizable. The friction lid and bowl band remove by hand with self-adjusting springs, so you can break the machine down for cleaning in under a minute between batches of different proteins. A transparent noise protection cover lets you watch the cut develop while keeping the noise contained. The adjustable, non-slip feet absorb vibration so the machine stays planted on your prep table even at full speed, and the emergency stop button is positioned within easy reach.

At 364 lb with a footprint of 30" x 34" x 36" with the lid open, this unit fits on a sturdy prep table or can be placed on a low stand at a comfortable working height. It runs on a NEMA 6-15P plug at 220V/60Hz/1-phase drawing 12.5 A. Made in Spain by Talsa.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. 15.9 qt bowl cutter for butcher shops, specialty producers, and smaller kitchens needing precise cut quality
  2. Handles 9 to 26 lb of soft meat or 9 to 18 lb of tough meat per batch
  3. 3 HP (2,300W) motor with electronic drive and overload protection handles dense mixtures reliably
  4. Variable knife speed from 750 to 3,000 RPM with 4 preselection buttons for quick texture adjustments
  5. Linear knife speed of 14 to 45 m/s delivers professional-grade cut quality
  6. Removable 3-knife head upgradeable to 6 knives for different product textures
  7. 7" digital touch screen displays knife speed, temperature, and time in real time
  8. Emergency stop button for immediate shutdown
  9. All stainless steel construction with solid bowl and lid for durability and easy sanitation
  10. Transparent noise protection cover reduces operating sound
  11. Removable friction lid/bowl band with self-adjusting springs comes apart for thorough cleaning
  12. Adjustable, non-slip, vibration-absorbing feet keep the machine stable on any surface
  13. Requires 220V/60Hz/1-Phase at 12.5A
  14. NEMA 6-15P plug
  15. Spanish-built construction

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$21,515.38
  • 15.9 qt bowl cutter for butcher shops, specialty producers, and smaller kitchens needing precise cut quality
  • Handles 9 to 26 lb of soft meat or 9 to 18 lb of tough meat per batch
  • 3 HP (2,300W) motor with electronic drive and overload protection handles dense mixtures reliably
  • Variable knife speed from 750 to 3,000 RPM with 4 preselection buttons for quick texture adjustments
  • Linear knife speed of 14 to 45 m/s delivers professional-grade cut quality
  • See full feature list

    The Omcan 46215 Batch Bowl Food Processor

    The Omcan Talsa FP-ES-0015 is a 15.9 qt bowl cutter sized for smaller batch runs where you need the same cut quality and speed control as a larger machine but don't need the 30 L capacity. It processes 9 to 26 lb of soft meat or 9 to 18 lb of tough meat per batch, which suits butcher shops, specialty sausage makers, and restaurant kitchens that produce in-house charcuterie and forcemeats in moderate quantities. The 3 hp (2,300 W) motor on 220V single-phase means you can run it anywhere you have a standard commercial outlet without requiring a three-phase panel, which opens up installations in smaller retail spaces and commissary kitchens. A 7" digital touch screen shows knife speed, product temperature, and processing time, giving you the same level of real-time batch control as the larger model.

    Variable Speed 3-Knife Head, 750-3,000 RPM

    The removable 3-knife head spins from 750 to 3,000 RPM with variable speed control and four preselection buttons, so you can jump between your most-used settings without dialing in from scratch every time. At the low end, 750 RPM gives you a coarse chop for chunky sausage blends where you want visible texture. At 3,000 RPM, the linear knife speed reaches 45 m/s, which emulsifies forcemeats and pâté batters into a smooth, uniform consistency that holds fat and moisture through cooking. An optional 6-knife head is available when you need faster throughput or a finer cut on the same batch size. The knife head removes without tools for sharpening and cleaning, and the motor includes electronic drive with overload protection that shuts down before you burn out the windings on a heavy load.

    All Stainless Steel Construction with Solid Bowl and Lid

    The bowl, lid, knife head, and machine body are all stainless steel, which matters in a USDA or health-inspected facility where every food-contact surface has to be non-porous and fully sanitizable. The friction lid and bowl band remove by hand with self-adjusting springs, so you can break the machine down for cleaning in under a minute between batches of different proteins. A transparent noise protection cover lets you watch the cut develop while keeping the noise contained. The adjustable, non-slip feet absorb vibration so the machine stays planted on your prep table even at full speed, and the emergency stop button is positioned within easy reach.

    At 364 lb with a footprint of 30" x 34" x 36" with the lid open, this unit fits on a sturdy prep table or can be placed on a low stand at a comfortable working height. It runs on a NEMA 6-15P plug at 220V/60Hz/1-phase drawing 12.5 A. Made in Spain by Talsa.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. 15.9 qt bowl cutter for butcher shops, specialty producers, and smaller kitchens needing precise cut quality
    2. Handles 9 to 26 lb of soft meat or 9 to 18 lb of tough meat per batch
    3. 3 HP (2,300W) motor with electronic drive and overload protection handles dense mixtures reliably
    4. Variable knife speed from 750 to 3,000 RPM with 4 preselection buttons for quick texture adjustments
    5. Linear knife speed of 14 to 45 m/s delivers professional-grade cut quality
    6. Removable 3-knife head upgradeable to 6 knives for different product textures
    7. 7" digital touch screen displays knife speed, temperature, and time in real time
    8. Emergency stop button for immediate shutdown
    9. All stainless steel construction with solid bowl and lid for durability and easy sanitation
    10. Transparent noise protection cover reduces operating sound
    11. Removable friction lid/bowl band with self-adjusting springs comes apart for thorough cleaning
    12. Adjustable, non-slip, vibration-absorbing feet keep the machine stable on any surface
    13. Requires 220V/60Hz/1-Phase at 12.5A
    14. NEMA 6-15P plug
    15. Spanish-built construction

    See all from Omcan

    Specifications

    Bowl Volume15.9 Qt.
    Bowl Capacity (Soft Meat)9-26 lb (4-26.5 lb)
    Bowl Capacity (Tough Meat)9-18 lb (4-17.6 lb)
    Knife HeadRemovable 3-Knife (Optional 6-Knife)
    Knife Speed750-3,000 RPM
    Linear Knife Speed14-45 m/s
    Speed ControlVariable with 4 Preselection Buttons
    Display7" Digital Touch Screen (Speed, Temperature, Time)
    Power2,300 W / 3 hp
    Electrical220V / 60Hz / 1-Phase
    Amperage12.5 A
    Plug TypeNEMA 6-15P
    ConstructionAll Stainless Steel
    Bowl and Lid MaterialSolid Stainless Steel
    Noise ProtectionTransparent Cover
    SafetyEmergency Stop Button, Motor Overload Protection
    Machine FeetAdjustable, Non-Slip, Vibration Absorbing
    Net Weight364 lb
    Net Dimensions, Open Lid (W x D x H)30" x 34" x 36"
    Country of OriginSpain

    Manufacturer's Warranty

    • 1 Year

      Labor

    • 1 Year

      Parts

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 46215 Batch Bowl Food Processor

    About Batch Bowl Processors

    A batch bowl food processor is the heavy duty commercial version of a home food processor: it chops, minces, purees, and emulsifies a full bowl of product at once, then the operator empties it and loads the next batch. That makes it the right commercial food processor for a restaurant making sauces, dressings, hummus, pesto, compound butters, forcemeats, and anything that needs a uniform texture rather than a sliced or shredded cut. Commercial batch bowl food processors run from 2.5-quart countertop units to 12-quart bowl processors for institutional prep, with motors from 3/4 HP and up on standard 120V power.

    Bowl cutter machines and buffalo choppers are commercial food choppers built for volume: a rotating horizontal bowl carries product past fixed knives spinning at up to 5,000 cuts per minute. Butcher shops, delis, and sausage makers use them for forcemeat, pulled pork, cheese for pizza topping, and salsa in volume. Capacities run from 10-pound countertop choppers to 143-quart industrial bowl cutters with dual motors and touch screen controls.

    Common Types of Batch Bowl Food Processors

    • Small batch bowl food processors (2.5 to 5 quarts): Compact countertop units with a stainless steel or clear-view bowl, a serrated S-blade, and slicing and shredding discs on models that accept them. Motors from 3/4 to 2 HP run back to back on a standard 120V outlet. This is the standard restaurant food processor for sauces, dips, and mincing.
    • Sealed-bowl processors: A sealed bowl, sealed S-blade, and sealed whipping disc keep soups, marinades, and mayonnaise inside the bowl instead of leaking around the hub, and the blade locks in place during pour-out so the operator can empty the bowl with one hand.
    • Large bowl processors (6 to 12 quarts): Stainless bowls with 3.5 to 6 quart working capacity, a clear cover with a feed chute and pusher, and variable speed from about 950 to 2,500 RPM. Corrosion-resistant stainless blades hold an edge through acidic loads like tomatoes and citrus. Sized for hotel kitchens, cafeterias, and caterers.
    • Vertical bowl cutters (3 to 9 quarts): A fixed stainless bowl with a high-speed knife at 1,400 to 2,800 RPM, most with variable speed, a see-through lid with a feed opening, and a sealed knife shaft that keeps liquid out of the motor. Built for fine emulsions: sausage farce, herb pastes, mayonnaise, nut butters. Some models add a built-in scraper and a thermal diffusion bowl bottom that goes straight to the stovetop.
    • Buffalo choppers (14 to 20 inch bowls): A shallow horizontal stainless bowl rotates at 22 to 24 RPM and carries product under twin or three-blade knives spinning at up to 5,000 cuts per minute, so food keeps moving instead of piling up or turning to mash. Capacities run 10 to 33 pounds per batch; a 10 liter model rates 480 pounds per hour. Models with a #12 PTO hub also drive meat grinder, slicer, and shredder attachments. Uses run from sausage emulsions and pulled pork to deli salads, pizza cheese, and breadcrumbs.
    • Production bowl cutters (16 to 143 quarts): Floor machines with 3 to 48 HP, variable knife speed from 500 to 5,000 RPM, and a 7 to 15 inch touch screen that shows knife speed, product temperature, and run time. Batch loads run from 9 pounds of meat up to 155 pounds. Built for charcuterie producers, meat plants, and commissaries, where bowl cutting yields up to 15 percent more finished product than other processing methods because the mix is not crushed, bruised, or drained.

    Buying a Commercial Batch Bowl Food Processor

    • Bowl size by volume: Working capacity on a commercial food processor is about half the bowl's rated volume, since the blade needs headroom. A 2.5 to 3.5 quart bowl covers a single restaurant line making sauces to order. A 4 to 6 quart bowl handles a day's prep for a full-service kitchen. Go to 9 or 12 quarts for banquet, cafeteria, or commissary batches.
    • Horsepower: Horsepower decides how dense a load the machine can process without bogging. One HP handles vegetables, herbs, and soft cheese. A heavy duty commercial food processor with 2 HP and up handles raw meat, hard cheese, and nut butters at full bowl. Induction motors run cooler than brushed motors and last longer under all-day use.
    • Variable speed and pulse: Pulse gives a controlled rough chop. Variable speed lets you start slow for a coarse cut and ramp up for a smooth emulsion in the same bowl, which matters for dressings and forcemeats where texture is the whole point.
    • Blades and discs: An S-blade chops, minces, and purees. Reversible slicing and shredding discs add coarse and fine cuts on processors that accept them. Bowl cutters and choppers use fixed knife heads and do not slice or shred; pair them with a continuous feed processor for that work.
    • Safety interlocks: Nearly every commercial food processor and bowl cutter has a lid or bowl-cover interlock that stops the motor when the cover opens, and several add a no-volt release so the machine will not restart on its own after a power cut. Buffalo choppers add a bowl-sensing switch so the knives cannot run without the bowl in place.
    • Electrical: Batch bowl processors, vertical bowl cutters, and buffalo choppers up to 20 pounds plug into a standard 120V outlet. The 33 pound chopper and the 16 quart production cutter run on 220 to 240V single-phase. Production cutters from 32 quarts up require 208 to 220V three-phase service, and the largest draw 100 amps or more.
    • Cleaning: Look for removable bowls with handles, sealed motor and knife shafts, and all-stainless contact surfaces. Painted or plastic parts chip and crack under daily washdown in a meat room.

    Batch Bowl Food Processor FAQs

    Batch Bowl vs Continuous Feed Food Processor: Which Do I Need?

    A batch bowl processor works on a fixed quantity in a closed bowl and excels at chopping, pureeing, and emulsifying to a uniform texture. A continuous feed processor pushes product through a disc and out a chute without stopping, which is the faster tool for slicing, shredding, and dicing large volumes of vegetables and cheese. If the menu leans on sauces, dips, spreads, and ground fillings, buy batch bowl. If it leans on sliced onions, shredded cabbage, and diced potatoes by the case, buy continuous feed. Many kitchens run one of each, or a combination batch bowl and continuous feed food processor that takes both a bowl and a feed chute on one motor base.

    What Size Commercial Food Processor Does a Restaurant Need?

    The best commercial food processor for a restaurant is the one sized to the largest single batch you make, not to total daily volume, since the processor cycles in under a minute. A small batch bowl food processor of 2.5 to 3.5 quarts handles most restaurants making sauces, aioli, and salsas by the quart. A 4 quart or 6 quart bowl suits catering and hotel kitchens making a hotel pan of product per batch. Institutional kitchens and commissaries step up to 9 to 12 quarts. Remember that working capacity is roughly half the bowl rating, so a 6 quart bowl processes about 3.5 quarts per load.

    Is a Food Chopper the Same as a Food Processor?

    No. A commercial food chopper, meaning a buffalo chopper or bowl cutter, uses a rotating bowl and fixed knives to chop and emulsify large loads of meat, cheese, and vegetables, and it does not slice or shred. A batch bowl food processor uses a fixed bowl with a spinning S-blade and can also slice, shred, and grate with discs. A food processor can do light chopping, but it will not keep up with a chopper on 10 to 30 pound batches, and a chopper cannot slice, shred, or run a small batch cleanly because of its minimum load. Pick by the job: processor for prep variety, chopper for volume.

    What Is a Buffalo Chopper Used For?

    A buffalo chopper, also called a bowl cutter or bowl chopper, uses a rotating bowl and fixed spinning knives to chop and emulsify large quantities of meat, cheese, bread, and vegetables fast. Butcher shops use it for sausage forcemeat, pulled pork, and ground fillings. Delis and pizzerias use it to chop cheese for topping and vegetables for salads and salsa. The horizontal bowl design handles 10 to 33 pounds per batch on countertop models and up to 155 pounds on production cutters, which is far more than a vertical food processor bowl holds.

    How Much Does a Buffalo Chopper Cost?

    Buffalo chopper pricing scales with bowl size and motor. Countertop choppers with 14 to 20 inch bowls are the entry point, with PTO hub models at the top of that group. Production bowl cutters in the 16 to 32 quart class cost several times more, and industrial 58 to 143 quart machines with dual motors and touch screen controls are plant-scale purchases. A 2.5 to 12 quart batch bowl food processor costs a fraction of any chopper, so the chopper premium only pays off when the volume is there. Current prices appear on each product.

    Related Categories

    Shop by Brand

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. 15.9 qt bowl cutter for butcher shops, specialty producers, and smaller kitchens needing precise cut quality
    2. Handles 9 to 26 lb of soft meat or 9 to 18 lb of tough meat per batch
    3. 3 HP (2,300W) motor with electronic drive and overload protection handles dense mixtures reliably
    4. Variable knife speed from 750 to 3,000 RPM with 4 preselection buttons for quick texture adjustments
    5. Linear knife speed of 14 to 45 m/s delivers professional-grade cut quality
    6. Removable 3-knife head upgradeable to 6 knives for different product textures
    7. 7" digital touch screen displays knife speed, temperature, and time in real time
    8. Emergency stop button for immediate shutdown
    9. All stainless steel construction with solid bowl and lid for durability and easy sanitation
    10. Transparent noise protection cover reduces operating sound
    11. Removable friction lid/bowl band with self-adjusting springs comes apart for thorough cleaning
    12. Adjustable, non-slip, vibration-absorbing feet keep the machine stable on any surface
    13. Requires 220V/60Hz/1-Phase at 12.5A
    14. NEMA 6-15P plug
    15. Spanish-built construction

    See all from Omcan

    Specifications

    Bowl Volume15.9 Qt.
    Bowl Capacity (Soft Meat)9-26 lb (4-26.5 lb)
    Bowl Capacity (Tough Meat)9-18 lb (4-17.6 lb)
    Knife HeadRemovable 3-Knife (Optional 6-Knife)
    Knife Speed750-3,000 RPM
    Linear Knife Speed14-45 m/s
    Speed ControlVariable with 4 Preselection Buttons
    Display7" Digital Touch Screen (Speed, Temperature, Time)
    Power2,300 W / 3 hp
    Electrical220V / 60Hz / 1-Phase
    Amperage12.5 A
    Plug TypeNEMA 6-15P
    ConstructionAll Stainless Steel
    Bowl and Lid MaterialSolid Stainless Steel
    Noise ProtectionTransparent Cover
    SafetyEmergency Stop Button, Motor Overload Protection
    Machine FeetAdjustable, Non-Slip, Vibration Absorbing
    Net Weight364 lb
    Net Dimensions, Open Lid (W x D x H)30" x 34" x 36"
    Country of OriginSpain

    Manufacturer's Warranty

      1 year

      Labor

      1 year

      Parts

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch