The Omcan 48405 Bubble Tea Station
This Omcan bubble tea station concentrates an entire beverage program into one 72 x 30 inch piece of 16-gauge 304 stainless steel: two 15 x 15 inch sinks in a wet waste top, a covered drop-in ice bin, perforated drainage panels, overshelves for small equipment, and an enclosed base behind swing doors. It serves as the worktable for preparing bubble tea, coffee and other beverages, and is built mainly for holding the small equipment of a bubble tea shop, such as sealing machines, tea extractors, smoothie makers, sugar dispensers and tea containers, where staff can reach them mid-order. The counter sits at 34 inches, with the overshelf taking overall height to 58 inches. At 72 inches wide and 350 pounds, plan the wall run and the door path before delivery day, and rough in water and drain lines to the two plumbing openings at the back of the station.
Two 15 by 15 Inch Sinks in a Wet Waste Top
Twin bowls, one at each end of the top, each measure 15 x 15 inches and 10 inches deep, and each carries a perforated drainage panel over the outer part of its opening. A gooseneck faucet rises behind each sink.
A Covered Drop-In Ice Bin
The 20 x 12 inch bin at the centre of the top is 15 inches deep, and its perforated sliding cover spans half of the opening, so it can be pushed over the back or the front of the bin while the other 6 inches stay open for the scoop.
16-Gauge 304 Stainless Steel Construction
The station is formed from 16-gauge sheet in type 304 stainless steel, a heavier gauge than the 18 and 20 gauge of Omcan's underbar cocktail pieces, which makes it both attractive and durable.
Overshelves for the Equipment Lineup
A tall centre panel rises behind the ice bin and carries two overshelves, the upper one 20 inches above the counter with a 4 inch lip along its back edge, and a small shelf sits above each end sink. The overshelves give extra storage for the sealing machines, sugar dispensers and tea containers the station is meant to hold, keeping the counter below clear for building drinks.
Enclosed Base with Swing Doors
Swing doors close off the base cabinet, and the station stands on six legs, 6 inches tall and set 33 inches apart along the front. A 6 inch backsplash runs behind the top at each end of the centre panel.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Complete bubble tea work station for holding sealing machines, tea extractors, smoothie makers, sugar dispensers and tea containers in one footprint
-
Two 15 x 15 inch sinks, one at each end, each with a perforated drainage panel over part of the opening
-
Gooseneck faucet behind each sink, with two plumbing openings at the back of the station
-
15 inch deep drop-in ice bin with a perforated sliding cover that spans half the opening
-
Two overshelves on the centre panel plus a small shelf above each sink for extra storage
-
Enclosed base with swing doors
-
16 gauge type 304 stainless steel construction, both attractive and durable
-
6 inch backsplash behind the top at each end
-
Worktable for bubble tea, coffee and other beverages
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Complete bubble tea work station for holding sealing machines, tea extractors, smoothie makers, sugar dispensers and tea containers in one footprint
Two 15 x 15 inch sinks, one at each end, each with a perforated drainage panel over part of the opening
Gooseneck faucet behind each sink, with two plumbing openings at the back of the station
15 inch deep drop-in ice bin with a perforated sliding cover that spans half the opening
Two overshelves on the centre panel plus a small shelf above each sink for extra storage
The Omcan 48405 Bubble Tea Station
This Omcan bubble tea station concentrates an entire beverage program into one 72 x 30 inch piece of 16-gauge 304 stainless steel: two 15 x 15 inch sinks in a wet waste top, a covered drop-in ice bin, perforated drainage panels, overshelves for small equipment, and an enclosed base behind swing doors. It serves as the worktable for preparing bubble tea, coffee and other beverages, and is built mainly for holding the small equipment of a bubble tea shop, such as sealing machines, tea extractors, smoothie makers, sugar dispensers and tea containers, where staff can reach them mid-order. The counter sits at 34 inches, with the overshelf taking overall height to 58 inches. At 72 inches wide and 350 pounds, plan the wall run and the door path before delivery day, and rough in water and drain lines to the two plumbing openings at the back of the station.
Two 15 by 15 Inch Sinks in a Wet Waste Top
Twin bowls, one at each end of the top, each measure 15 x 15 inches and 10 inches deep, and each carries a perforated drainage panel over the outer part of its opening. A gooseneck faucet rises behind each sink.
A Covered Drop-In Ice Bin
The 20 x 12 inch bin at the centre of the top is 15 inches deep, and its perforated sliding cover spans half of the opening, so it can be pushed over the back or the front of the bin while the other 6 inches stay open for the scoop.
16-Gauge 304 Stainless Steel Construction
The station is formed from 16-gauge sheet in type 304 stainless steel, a heavier gauge than the 18 and 20 gauge of Omcan's underbar cocktail pieces, which makes it both attractive and durable.
Overshelves for the Equipment Lineup
A tall centre panel rises behind the ice bin and carries two overshelves, the upper one 20 inches above the counter with a 4 inch lip along its back edge, and a small shelf sits above each end sink. The overshelves give extra storage for the sealing machines, sugar dispensers and tea containers the station is meant to hold, keeping the counter below clear for building drinks.
Enclosed Base with Swing Doors
Swing doors close off the base cabinet, and the station stands on six legs, 6 inches tall and set 33 inches apart along the front. A 6 inch backsplash runs behind the top at each end of the centre panel.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Complete bubble tea work station for holding sealing machines, tea extractors, smoothie makers, sugar dispensers and tea containers in one footprint
-
Two 15 x 15 inch sinks, one at each end, each with a perforated drainage panel over part of the opening
-
Gooseneck faucet behind each sink, with two plumbing openings at the back of the station
-
15 inch deep drop-in ice bin with a perforated sliding cover that spans half the opening
-
Two overshelves on the centre panel plus a small shelf above each sink for extra storage
-
Enclosed base with swing doors
-
16 gauge type 304 stainless steel construction, both attractive and durable
-
6 inch backsplash behind the top at each end
-
Worktable for bubble tea, coffee and other beverages
Resources & Downloads
See all from Omcan
Specifications
| Sinks | 2 |
| Sink Size | 15 x 15 in |
| Sink Depth | 10 in |
| Faucets | 2, gooseneck |
| Plumbing Openings | 2, at back |
| Ice Bin Size | 20 x 12 x 15 in |
| Ice Bin Cover | Sliding, perforated, covers 6 of 12 in |
| Drainage Panels | Perforated, 1 per sink |
| Overshelves | 2 on centre panel, plus 1 above each sink |
| Upper Overshelf Height Above Counter | 20 in |
| Upper Overshelf Rear Lip | 4 in |
| Height with Overshelf | 58 in |
| Base | Enclosed, swing doors |
| Legs | 6, 6 in tall |
| Material | 16-gauge 304 stainless steel |
| Backsplash Height | 6 in |
| Counter Height | 34 in |
| Overall Width | 72 in |
| Overall Depth | 30 in |
| Weight | 350 lb |
Manufacturer's Warranty
-
6 Month
Labor
-
6 Month
Parts
Certifications & Approvals
-
NSF Approved
Complete bubble tea work station for holding sealing machines, tea extractors, smoothie makers, sugar dispensers and tea containers in one footprint