Omcan 48581 26 In. Vitella 30-Division Automatic Bun Divider and Rounder, Hydraulic, 9-Program Memory, 220V/1Ph

An automatic dough divider rounder portions a single bulk dough load into uniformly sized rounds in one hydraulic cycle, ready for proofing and shaping. Bakeries, pizza shops, restaurants, catering operations, and hotel breakfast lines use them to replace hand portioning and hand rounding. Common menu items include dinner rolls, hamburger buns, pizza dough balls, bagels, brioche, and bread loaves. The same equipment is also called an automatic dough divider and rounder, bun divider rounder, hydraulic dough divider, commercial bun divider, or bakery dough divider.

The right automatic dough divider rounder depends on three things: target portion size, cut count per cycle, and production volume. Catalog units divide bulk dough into 11 to 52 equal pieces per press cycle. Portion sizes range from 0.42 ounces for dinner rolls and small buns up to 17.63 ounces for large brioche, pizza dough balls, and loaf-size pieces. Throughput runs 2,700 to 6,480 pieces per hour depending on cut count and operator workflow. Hydraulic drive applies even pressure across every cavity so each piece comes out the same weight and shape. Common configurations, buying guidance, and frequent buyer questions follow below.

Common Types and Configurations

• 15-division automatic dough divider rounder: Divides bulk dough into 15 uniform rounds per cycle. Suited to mid-size bakeries producing dinner rolls, hamburger buns, and brioche at 2,700 pieces per hour. Catalog units handle portions from 5.29 to 17.63 ounces.
• Mid-volume divider rounder, 22 to 30 cuts: Higher-throughput unit dividing into 22 to 30 pieces per cycle at up to 5,400 pieces per hour. Suited to bun production for restaurant chains and supermarket bakery counters. Portion range covers 1.4 to 7.76 ounces.
• High-volume divider rounder, 36 cuts: Top of the standard range at 36 pieces per cycle and 6,480 pieces per hour. Suited to high-volume bakeries producing rolls, small buns, and pizza dough balls. Portion range 1.2 to 3.8 ounces.
• Specialty divider rounder, 52 cuts: Specialty high-cut unit producing the smallest portion sizes (0.42 to 1.41 ounces). Suited to dinner roll and pinch-bun production for high-volume hotels, banquet operations, and catering.
• Touchscreen control with 10 programs: Programmable cycle on premium catalog units. Operator stores and recalls 10 preset divide-and-round cycles for different dough types, portion sizes, and recipes.
• 9-program memory hydraulic models: Hydraulic-drive units with 9-program memory and a 15.7-inch head diameter. Handle loads up to 12.1 pounds per cycle at 261 PSI per hour with a 26 by 27.6 inch footprint.
• Hydraulic drive system: Standard across the catalog. Even hydraulic pressure across every cavity produces uniform ball weight and a smooth surface, which is hard to achieve with manual or lighter-duty machines.

What to Look at Before You Buy

• Cut count per cycle: Match the cut count to your target portion size. Dinner rolls and small buns suit 30, 36, or 52-piece units. Mid-size buns and brioche suit 15 to 22-piece units. Large pizza dough balls and bread portions suit 11 to 15-piece units. Catalog cut counts run 11, 15, 18, 22, 30, 36, and 52 pieces.
• Portion size range: Catalog portion range runs 0.42 ounces up to 17.63 ounces. Each unit has a specific weight range within that spread. Confirm your target portion weight falls within the unit's range before ordering.
• Throughput: Catalog throughput runs 2,700 to 6,480 pieces per hour. A high-cut machine produces more total pieces per hour, but the pieces are smaller. Match throughput to the dough load size and shift volume, not only the headline number.
• Hydraulic drive: Standard across the catalog. Hydraulic pressure produces uniform piece weight on every cavity, regardless of dough consistency. Worth the cost over manual or lighter-duty alternatives if portion uniformity matters for product spec.
• Control type: Touchscreen with 10 program memory suits operations running multiple dough types or recipes. 9-program memory hydraulic units suit bakeries running 5 to 9 standard products. Push-button units suit single-product operations.
• Voltage and phase: Catalog units run on 220V single-phase or 220V three-phase. Confirm electrical service at the install location before ordering. Three-phase units typically deliver smoother hydraulic operation under heavy load.
• Footprint and weight: Premium hydraulic units weigh around 540 pounds with a 26 by 27.6-inch footprint. Confirm floor capacity, line clearance, and access for operator loading before ordering.
• Cleaning access: Removable cutting heads, accessible cavity plates, and stainless steel food-contact surfaces matter for daily sanitation. Confirm easy disassembly on the parts that need daily wash between dough types.

Frequently Asked Questions

What is an automatic dough divider rounder used for?

An automatic dough divider rounder takes a single bulk dough load and divides it into uniformly sized rounds in one hydraulic cycle. Bakeries use them to portion dinner rolls, hamburger buns, brioche, bagels, and bread loaves to consistent weight. Pizza shops use them to portion pizza dough balls. Catering operations and hotel breakfast lines use them to produce hundreds of identical rolls per cycle without hand portioning. The hydraulic drive applies even pressure across every cavity, so each piece comes out the same weight and shape, which is hard to achieve with manual scaling or hand rounding.

What is the difference between manual, semi-automatic, and fully automatic dough divider rounders?

A manual dough divider uses a hand-operated lever to press the dough through a cutting head; the operator works each cycle by hand. A semi-automatic dough divider rounder powers the cutting press but the operator still loads dough and removes rounded portions between cycles. A fully automatic dough divider rounder runs the entire press, divide, and round cycle on programmable controls. Manual units suit low-volume bakeries and pizzerias. Semi-automatic units suit mid-volume operations that want consistent press pressure without committing to full automation. Fully automatic units suit high-volume bakeries and supermarket bakery counters running long production shifts.

What size automatic dough divider rounder do I need (cuts per cycle)?

Match the cut count to your target portion size and shift volume. Small bakeries producing fewer than 1,000 rolls per shift suit a 15-cut unit at 2,700 pieces per hour. Mid-size bakeries producing 1,000 to 3,000 rolls per shift need a 22 or 30-cut unit at 3,960 to 5,400 pieces per hour. High-volume bakeries and supermarket counters producing 3,000 to 6,000 rolls per shift need a 36-cut unit at 6,480 pieces per hour. Specialty operations producing dinner roll-size or smaller pieces need the 52-cut unit. Confirm your target portion weight falls inside the unit's portion range before ordering.

Related Categories

• Dough Dividers
• Semi-Automatic Dough Divider Rounders
• Manual Dough Dividers
• Spiral Dough Mixers

Shop by Brand

• American Eagle Food Machinery
• AMPTO
• Mecnosud
• Omcan
• Univex

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.