Skip to content

Omcan 49109 1/2 In. Cut Countertop Vegetable Chopper, Scalloped Blades, Removable Pusher

SKU49109 BrandOmcan

The Omcan 49109 Vegetable Chopper

This Omcan countertop vegetable chopper dices lettuce, onion and other vegetables into 1/2 inch squares with one pull of the lever, in significantly less time than chopping by hand. The scalloped blade grid covers a 7 x 7 inch cutting area. It is entirely manual, no cord and no outlet, so it sets up anywhere on the prep line, but check your counter clearance: the unit stands 29 inches tall. Set it on its non-slip feet and clean it thoroughly before the first batch; a storage container for the cut product is not included.

Scalloped Blades Cut Clean 1/2 Inch Squares

The razor-sharp scalloped blades are precision-engineered to create perfect 1/2 inch squares without causing any bruising or crushing. Hold the lever up, place the product on the blades, take your hands clear of the cutting area and bring the lever down firmly; the push plate forces the product through the blade grid in one stroke.

7 by 7 Inch Cutting Area

The 7 x 7 inch grid gives you a square cutting area for each load, and every piece comes out at the same 1/2 inch size, so a variety of vegetables such as lettuce and onion can be diced in a fraction of the time. The lever locks in the down position with the pin for safety between batches, and locks in the up position, with the pin through the lever and link bars, so the blade and holder assembly can be removed safely.

Pusher Disassembles for Fast Cleanup

The pusher disassembles easily for cleaning: remove the pin, move the lever out of the way, and lift the push plate off the guide rods. Release the hold-down clips and the blade and holder assembly lifts off the frame; it can be completely disassembled by removing the machine screws on its underside. Clean the chopper before and after each use, go easy on alkaline cleansers, which can pit and dull the finish, and if the push plate stops sliding freely, lubricate the guide rods with mineral oil or a food-grade lubricant rather than cooking oil.

Manual Lever with Non-Slip Feet

There is no motor to maintain and nothing to plug in; the lever drives the push plate, and the non-slip feet give extra stability while you work the stroke. The base assembly carries four legs with rubber feet, and the unit weighs 14.8 pounds.

About Omcan

For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

Features & Benefits

  1. Lever-action vegetable chopper for lettuce, onion and other vegetables
  2. One pull of the lever drives the push plate and dices the product into 1/2 inch squares
  3. Razor-sharp scalloped blades cut perfect squares without bruising or crushing
  4. Chops a variety of vegetables in a fraction of the time
  5. Lever locks in the down position with the pin for safety, or in the up position to remove the blade assembly
  6. Pusher disassembles easily for cleaning, and the blade and holder assembly lifts off the frame
  7. Non-slip feet provide extra stability during use
  8. No motor or cord, so it sets up anywhere on the prep line
  9. Pair it with your own container to catch the cut product, since none is included

Free Shipping ? 48 Contiguous states & DC only.

In Stock: Ships in 1-2 Business Days

$369.14
  • Lever-action vegetable chopper for lettuce, onion and other vegetables
  • One pull of the lever drives the push plate and dices the product into 1/2 inch squares
  • Razor-sharp scalloped blades cut perfect squares without bruising or crushing
  • Chops a variety of vegetables in a fraction of the time
  • Lever locks in the down position with the pin for safety, or in the up position to remove the blade assembly
  • See full feature list

    The Omcan 49109 Vegetable Chopper

    This Omcan countertop vegetable chopper dices lettuce, onion and other vegetables into 1/2 inch squares with one pull of the lever, in significantly less time than chopping by hand. The scalloped blade grid covers a 7 x 7 inch cutting area. It is entirely manual, no cord and no outlet, so it sets up anywhere on the prep line, but check your counter clearance: the unit stands 29 inches tall. Set it on its non-slip feet and clean it thoroughly before the first batch; a storage container for the cut product is not included.

    Scalloped Blades Cut Clean 1/2 Inch Squares

    The razor-sharp scalloped blades are precision-engineered to create perfect 1/2 inch squares without causing any bruising or crushing. Hold the lever up, place the product on the blades, take your hands clear of the cutting area and bring the lever down firmly; the push plate forces the product through the blade grid in one stroke.

    7 by 7 Inch Cutting Area

    The 7 x 7 inch grid gives you a square cutting area for each load, and every piece comes out at the same 1/2 inch size, so a variety of vegetables such as lettuce and onion can be diced in a fraction of the time. The lever locks in the down position with the pin for safety between batches, and locks in the up position, with the pin through the lever and link bars, so the blade and holder assembly can be removed safely.

    Pusher Disassembles for Fast Cleanup

    The pusher disassembles easily for cleaning: remove the pin, move the lever out of the way, and lift the push plate off the guide rods. Release the hold-down clips and the blade and holder assembly lifts off the frame; it can be completely disassembled by removing the machine screws on its underside. Clean the chopper before and after each use, go easy on alkaline cleansers, which can pit and dull the finish, and if the push plate stops sliding freely, lubricate the guide rods with mineral oil or a food-grade lubricant rather than cooking oil.

    Manual Lever with Non-Slip Feet

    There is no motor to maintain and nothing to plug in; the lever drives the push plate, and the non-slip feet give extra stability while you work the stroke. The base assembly carries four legs with rubber feet, and the unit weighs 14.8 pounds.

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Features & Benefits

    1. Lever-action vegetable chopper for lettuce, onion and other vegetables
    2. One pull of the lever drives the push plate and dices the product into 1/2 inch squares
    3. Razor-sharp scalloped blades cut perfect squares without bruising or crushing
    4. Chops a variety of vegetables in a fraction of the time
    5. Lever locks in the down position with the pin for safety, or in the up position to remove the blade assembly
    6. Pusher disassembles easily for cleaning, and the blade and holder assembly lifts off the frame
    7. Non-slip feet provide extra stability during use
    8. No motor or cord, so it sets up anywhere on the prep line
    9. Pair it with your own container to catch the cut product, since none is included

    Resources & Downloads

    See all from Omcan

    Specifications

    OperationManual lever
    MountingCountertop
    Cutting Area7 x 7 in (178 x 178 mm)
    Cut Size1/2 x 1/2 in
    Cutting Thickness1/2 in (12.7 mm)
    Blade StyleScalloped
    PusherRemovable
    Lever LockPin, up or down position
    Feet4 rubber, non-slip
    Power RequiredNone
    Suitable ProductsLettuce, onions, vegetables
    Storage ContainerNot included
    Replacement Blade and Holder AssemblyAV230 (1/2 in)
    Replacement Push BlockAV229 (1/2 in)
    Overall Width18 in (457 mm)
    Overall Depth12.5 in (318 mm)
    Overall Height29 in (737 mm)
    Weight14.8 lb (6.7 kg)

    Manufacturer's Warranty

    • 6 Month

      Warranty

    Certifications & Approvals

    • NFS
      NSF Approved

    The Chef Store is your go-to online destination for commercial food service equipment. We are committed to making your shopping experience seamless and ensuring you have the resources needed to make informed purchasing decisions. We continuously invest in product information development so that you have the knowledge and tools to choose the right equipment for your business. Whether you need help understanding product specifications or recommendations for your specific use case, our experienced team is here to help. We receive ongoing product training from the manufacturers we represent to ensure you are always well-informed and up to date. We pride ourselves on our core expertise: providing answers to your questions, guiding you through the decision-making process, and ultimately helping you make the best equipment purchasing decisions for your business.

    We're here to help. To us, that means no job is too big or too small. Whether you’re a national food chain or a small mom-and-pop shop, our commitment remains the same: ensuring every project is completed to your satisfaction. From the moment you place your order to delivery, we are dedicated to ensuring a seamless, hassle-free process. We continually evaluate and refine our operations, incorporating innovative technology to enhance efficiency and streamline communication with both customers and vendors. Our goal is to minimize delays and ensure your order reaches you as quickly and smoothly as possible.

    We carry a wide range of trusted restaurant equipment brands, and our catalog is always growing. If there's a particular item or brand you don't see on our website, please reach out to us; we’d be happy to help you find it. Not to mention, we leverage manufacturer and buying group relationships to offer our customers great prices and savings. Through these partnerships, freight programs, rebate programs, and more, we are able to purchase equipment at significant discounts and pass along the savings to our customers.

     

     

     

    We're excited to serve you next! 

    The Omcan 49109 Vegetable Chopper

    About Omcan

    For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.

    Product Features

    1. Lever-action vegetable chopper for lettuce, onion and other vegetables
    2. One pull of the lever drives the push plate and dices the product into 1/2 inch squares
    3. Razor-sharp scalloped blades cut perfect squares without bruising or crushing
    4. Chops a variety of vegetables in a fraction of the time
    5. Lever locks in the down position with the pin for safety, or in the up position to remove the blade assembly
    6. Pusher disassembles easily for cleaning, and the blade and holder assembly lifts off the frame
    7. Non-slip feet provide extra stability during use
    8. No motor or cord, so it sets up anywhere on the prep line
    9. Pair it with your own container to catch the cut product, since none is included

    See all from Omcan

    Specifications

    OperationManual lever
    MountingCountertop
    Cutting Area7 x 7 in (178 x 178 mm)
    Cut Size1/2 x 1/2 in
    Cutting Thickness1/2 in (12.7 mm)
    Blade StyleScalloped
    PusherRemovable
    Lever LockPin, up or down position
    Feet4 rubber, non-slip
    Power RequiredNone
    Suitable ProductsLettuce, onions, vegetables
    Storage ContainerNot included
    Replacement Blade and Holder AssemblyAV230 (1/2 in)
    Replacement Push BlockAV229 (1/2 in)
    Overall Width18 in (457 mm)
    Overall Depth12.5 in (318 mm)
    Overall Height29 in (737 mm)
    Weight14.8 lb (6.7 kg)

    Manufacturer's Warranty

      1/2 year

      Warranty

    Visit our help center
    Check your order status
    Return or exchange
    Get in touch