The Omcan 46500 Beer Keg Cooler
The Omcan BC-CN-0152 is a beer keg cooler with 152 liters (5.37 cubic feet) of refrigerated capacity, designed for bars, pubs, restaurants, and any draft beer operation that needs to keep kegs cold and ready to pour. It accommodates multiple keg sizes including 20L (5 gal), 30L (7.75 gal), and 58.5L (15.5 gal) kegs, so you can store a variety of draft options in a single unit. The digital controller holds the interior between 36°F and 46°F (35.6°F to 46.4°F), the ideal range for serving most beers at their proper temperature.
R600a Refrigerant with Cyclopentane Insulation
The compressor runs on R600a refrigerant, a hydrocarbon with low environmental impact that runs efficiently in small refrigeration units. Cyclopentane foam insulation (C-P) in the cabinet walls provides effective thermal isolation, keeping cold air in and warm air out so the compressor does not have to cycle as frequently. The maximum ambient temperature rating is 75°F, so the unit performs best in climate-controlled bar areas rather than hot outdoor patios or unconditioned storage rooms. A wicking pad must be replaced every six months and the appliance drain should connect directly to a floor drain to maintain warranty coverage.
Compact Footprint with Casters
At 20.7 inches wide, 26.2 inches deep, and 33.2 inches tall, the cooler fits under standard bar counters or in tight back-bar spaces. Four casters (two locking at front) let you roll the unit into position and lock it in place. At 79.4 pounds, it is manageable for repositioning but stable once locked down. The unit runs on a 115V/60Hz/1Ph circuit.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Purpose-built keg cooler for bars, pubs, restaurants, and any draft beer operation
-
5.37 cu. ft. accommodates 20L (5 gal), 30L (7.75 gal), and 58.5L (15.5 gal) kegs
-
Holds between 35.6 and 46.4°F with a digital controller for precise draft serving temps
-
4 casters (2 locking at front) make it easy to roll kegs in and lock the unit in place
-
Must connect to a floor drain for proper condensation management
-
Replace the wicking pad every 6 months to maintain optimal performance
-
Operates in environments up to 75°F for reliable cooling behind the bar
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Purpose-built keg cooler for bars, pubs, restaurants, and any draft beer operation
5.37 cu. ft. accommodates 20L (5 gal), 30L (7.75 gal), and 58.5L (15.5 gal) kegs
Holds between 35.6 and 46.4°F with a digital controller for precise draft serving temps
4 casters (2 locking at front) make it easy to roll kegs in and lock the unit in place
Must connect to a floor drain for proper condensation management
The Omcan 46500 Beer Keg Cooler
The Omcan BC-CN-0152 is a beer keg cooler with 152 liters (5.37 cubic feet) of refrigerated capacity, designed for bars, pubs, restaurants, and any draft beer operation that needs to keep kegs cold and ready to pour. It accommodates multiple keg sizes including 20L (5 gal), 30L (7.75 gal), and 58.5L (15.5 gal) kegs, so you can store a variety of draft options in a single unit. The digital controller holds the interior between 36°F and 46°F (35.6°F to 46.4°F), the ideal range for serving most beers at their proper temperature.
R600a Refrigerant with Cyclopentane Insulation
The compressor runs on R600a refrigerant, a hydrocarbon with low environmental impact that runs efficiently in small refrigeration units. Cyclopentane foam insulation (C-P) in the cabinet walls provides effective thermal isolation, keeping cold air in and warm air out so the compressor does not have to cycle as frequently. The maximum ambient temperature rating is 75°F, so the unit performs best in climate-controlled bar areas rather than hot outdoor patios or unconditioned storage rooms. A wicking pad must be replaced every six months and the appliance drain should connect directly to a floor drain to maintain warranty coverage.
Compact Footprint with Casters
At 20.7 inches wide, 26.2 inches deep, and 33.2 inches tall, the cooler fits under standard bar counters or in tight back-bar spaces. Four casters (two locking at front) let you roll the unit into position and lock it in place. At 79.4 pounds, it is manageable for repositioning but stable once locked down. The unit runs on a 115V/60Hz/1Ph circuit.
About Omcan
For over 74 years, Omcan has been a trusted name in the foodservice industry across Canada and the United States. Built on consistency, credibility, and long-standing customer relationships, Omcan offers a dependable range of products to support a wide range of operations. With a global network and localized service, the brand delivers complete solutions—from smallwares to advanced equipment. In 2024, Omcan introduced the Trento brand, representing a curated lineup of European foodservice equipment available exclusively in North America. Whether supporting independent operators or institutional kitchens, Omcan is focused on practical performance and reliable service.
Features & Benefits
-
Purpose-built keg cooler for bars, pubs, restaurants, and any draft beer operation
-
5.37 cu. ft. accommodates 20L (5 gal), 30L (7.75 gal), and 58.5L (15.5 gal) kegs
-
Holds between 35.6 and 46.4°F with a digital controller for precise draft serving temps
-
4 casters (2 locking at front) make it easy to roll kegs in and lock the unit in place
-
Must connect to a floor drain for proper condensation management
-
Replace the wicking pad every 6 months to maintain optimal performance
-
Operates in environments up to 75°F for reliable cooling behind the bar
Resources & Downloads
See all from Omcan
Specifications
| Capacity | 152L (5.37 cu. ft.) |
| Keg Sizes Supported | 20L (5 gal), 30L (7.75 gal), 58.5L (15.5 gal) |
| Temperature Range | 35.6-46.4°F (218°F) |
| Controller | Digital |
| Refrigerant | R600a |
| Foaming Component | Cyclopentane (C-P) |
| Max Ambient Temperature | 75°F |
| Electrical | 115V / 60Hz / 1Ph |
| Casters | 4 (2 locking at front) |
| Net Dimensions (W x D x H) | 20.7" x 26.2" x 33.2" |
| Packaging Dimensions | 36" x 24" x 40" |
| Net Weight | 79.4 lb |
| Packaging Weight | 110 lb |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Purpose-built keg cooler for bars, pubs, restaurants, and any draft beer operation