The Prepline PCST-2448 Sink Table
The Prepline PCST-2448 combines a work table, a hand and prep sink, and an enclosed storage cabinet in a single 48 inch long, 24 inch deep unit. Instead of buying a table, a drop-in sink, and a cabinet separately and giving up wall space to each, you get all three in one 36 inch high work surface with a sink bowl on the left and open counter to the right. It suits coffee shops, bars, prep alcoves, and anywhere plumbing and prep have to share a tight footprint.
16 Gauge Type 304 Stainless Steel Top and Bowl
The worktop and sink bowl are 16 gauge Type 304 stainless steel. Type 304 carries more nickel than the 430 grade used in the base, which is what you want in the wet zone: it shrugs off the salt, citrus, and constant standing water that eventually pit lesser steel around a drain. The base cabinet, midshelf, and backsplash are 18 gauge Type 430 stainless, keeping the dry structure solid without paying the 304 premium where it is not needed.
Sink with Faucet, Basket, and Drain Included
The bowl measures 16 inches left to right, 14 inches front to back, and a full 12 inches deep, enough to soak a half size sheet pan on an angle or fill a stock pot under the tap. An 8 inch swing spout faucet comes in the box, along with the drain and basket, so your plumber makes the water and waste connections and the station is working the same day. The included 6 inch backsplash keeps splash off the wall behind the bowl.
Enclosed Cabinet Base with Sliding Doors
Below the top, sliding doors with recessed handles close off a full storage cabinet, so chemicals, towels, and backup smallwares stay covered instead of sitting on an open undershelf in the splash zone. The midshelf inside adjusts in height, lifts out for cleaning, and is rated to hold 240 pounds of stock.
Knock Down Design with Adjustable Feet
The unit assembles on site from a knock down kit with basic tools, which also means it fits through narrow doorways and basement stairwells that a welded one-piece cabinet cannot make. Four 6 inch feet each give you 2 inches of adjustment, so the top levels out and drains properly even on a sloped floor near a floor drain.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Work table, prep sink, and enclosed storage cabinet combined in one compact station
-
Corrosion resistant Type 304 stainless steel in the wet zone, Type 430 stainless base structure
-
Deep sink bowl soaks half size sheet pans and fills stock pots with ease
-
Swing spout faucet, basket, and drain all included in the box
-
Backsplash included to protect the wall behind the bowl
-
Sliding doors with recessed handles keep stored chemicals and towels covered
-
Adjustable, removable midshelf rated for heavy backup stock
-
Knock down design assembles on site and fits through narrow doorways
-
Adjustable feet level the station on sloped floors near floor drains
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Work table, prep sink, and enclosed storage cabinet combined in one compact station
Corrosion resistant Type 304 stainless steel in the wet zone, Type 430 stainless base structure
Deep sink bowl soaks half size sheet pans and fills stock pots with ease
Swing spout faucet, basket, and drain all included in the box
Backsplash included to protect the wall behind the bowl
The Prepline PCST-2448 Sink Table
The Prepline PCST-2448 combines a work table, a hand and prep sink, and an enclosed storage cabinet in a single 48 inch long, 24 inch deep unit. Instead of buying a table, a drop-in sink, and a cabinet separately and giving up wall space to each, you get all three in one 36 inch high work surface with a sink bowl on the left and open counter to the right. It suits coffee shops, bars, prep alcoves, and anywhere plumbing and prep have to share a tight footprint.
16 Gauge Type 304 Stainless Steel Top and Bowl
The worktop and sink bowl are 16 gauge Type 304 stainless steel. Type 304 carries more nickel than the 430 grade used in the base, which is what you want in the wet zone: it shrugs off the salt, citrus, and constant standing water that eventually pit lesser steel around a drain. The base cabinet, midshelf, and backsplash are 18 gauge Type 430 stainless, keeping the dry structure solid without paying the 304 premium where it is not needed.
Sink with Faucet, Basket, and Drain Included
The bowl measures 16 inches left to right, 14 inches front to back, and a full 12 inches deep, enough to soak a half size sheet pan on an angle or fill a stock pot under the tap. An 8 inch swing spout faucet comes in the box, along with the drain and basket, so your plumber makes the water and waste connections and the station is working the same day. The included 6 inch backsplash keeps splash off the wall behind the bowl.
Enclosed Cabinet Base with Sliding Doors
Below the top, sliding doors with recessed handles close off a full storage cabinet, so chemicals, towels, and backup smallwares stay covered instead of sitting on an open undershelf in the splash zone. The midshelf inside adjusts in height, lifts out for cleaning, and is rated to hold 240 pounds of stock.
Knock Down Design with Adjustable Feet
The unit assembles on site from a knock down kit with basic tools, which also means it fits through narrow doorways and basement stairwells that a welded one-piece cabinet cannot make. Four 6 inch feet each give you 2 inches of adjustment, so the top levels out and drains properly even on a sloped floor near a floor drain.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Work table, prep sink, and enclosed storage cabinet combined in one compact station
-
Corrosion resistant Type 304 stainless steel in the wet zone, Type 430 stainless base structure
-
Deep sink bowl soaks half size sheet pans and fills stock pots with ease
-
Swing spout faucet, basket, and drain all included in the box
-
Backsplash included to protect the wall behind the bowl
-
Sliding doors with recessed handles keep stored chemicals and towels covered
-
Adjustable, removable midshelf rated for heavy backup stock
-
Knock down design assembles on site and fits through narrow doorways
-
Adjustable feet level the station on sloped floors near floor drains
Resources & Downloads
See all from Prepline
Specifications
| Length | 48" |
| Width (Depth) | 24" |
| Overall Height | 42" |
| Working Height | 36" |
| Bowl Size (L to R) | 16" |
| Bowl Size (F to B) | 14" |
| Bowl Depth | 12" |
| Faucet | 8" Swing Spout |
| Backsplash | 6" (Included) |
| Top and Bowl Material | 16 Gauge Type 304 Stainless Steel |
| Base, Midshelf, Backsplash Material | 18 Gauge Type 430 Stainless Steel |
| Midshelf Capacity | 240 lb. |
| Midshelf | Adjustable and Removable |
| Doors | Sliding with Recessed Handles |
| Includes | Basket and Drain |
| Feet | Adjustable 6" Feet, 2" of Adjustability |
| Assembly | Knock Down |
| Shipping Weight | 182 lb. |
| Shipping Dimensions | 57" x 31" x 19.2" |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Work table, prep sink, and enclosed storage cabinet combined in one compact station