Prepline PCST-3072 30"D x 72"L Stainless Steel Enclosed Base Work Table with Sink, Sliding Doors, and 6" Backsplash, Knock-Down

The Prepline PCST-3072 is a 30 inch deep by 72 inch long stainless steel enclosed base work table with a built-in sink and sliding doors, the kind of all-in-one station that solves three problems at once in a prep area: you get a full work surface, a handwashing and rinsing point, and closed storage underneath, all in one footprint. The counter sits at a 36 inch working height, and the included 6 inch backsplash brings the overall height to 42 inches while keeping splash and food debris off the wall behind it.

16 Gauge 304 Stainless Steel Top and Bowl

The top and the sink bowl are 16 gauge 304 stainless steel. That matters because 304 is the grade that shrugs off salt, acidic sauces, and daily bleach wipe-downs, where lower grades slowly pit and stain around the drain. The bowl measures 16 inches left to right by 20 inches front to back with a 12 inch depth, enough to soak sheet pans, rinse produce, or wash hands without water sloshing onto the counter. A 10 inch swing spout faucet comes in the box along with a basket and drain, so you are not sourcing plumbing trim separately before the table can go into service.

Enclosed Cabinet Base with Sliding Doors

Unlike an open base table where everything on the undershelf collects grease film and dust, the enclosed 18 gauge 430 stainless steel cabinet keeps dry goods, backup smallwares, and cleaning supplies behind closed doors. The doors slide instead of swinging, so nobody working the line gets clipped by an open door in a narrow aisle, and the recessed handles leave nothing protruding to snag an apron or a passing cart.

Adjustable Midshelf and Leveling Feet

Inside the cabinet, an adjustable and removable midshelf rated for 280 pounds lets you set the shelf height around tall stock pots or pull it out entirely for kegs and bulk containers. The 6 inch feet adjust through 2 inches of travel, so the table sits level and the sink drains properly even on an old tile floor that has never been flat.

Knock-Down Design That Fits Through a Standard Door

The PCST-3072 arrives as a knock-down unit and assembles on site. A fully welded cabinet this size is awkward to carry through a back hallway; a flat-packed one goes up a stairwell and through a standard doorway, then bolts together in the room where it will live. Once assembled, the unit works as a wash-up station in a prep room, a dish drop point in a cafe, or a utility counter in a concession stand.