The Prepline PPEC-3-SB Casters
The Prepline PPEC-3-SB is a set of four 3 inch low profile swivel casters with expanding stem posts, made to slide into the tubular legs of a work table or equipment stand and turn a stationary station into a rolling one. Two of the four casters have brakes and two roll free. Kitchens buy these for one reason above all: a prep table that rolls can be pulled out for the floor mop and pushed back in seconds, where a fixed table means sweeping around the same four legs every night and hoping the inspector never looks underneath.
1.42 Inch Expanding Stem That Grips from Inside the Leg
Instead of bolting to a plate, each caster carries a 1.42 inch plastic expanding post. Slide the post into the open bottom of a tubular table leg, tighten it, and the post expands against the inside wall of the tube until the caster and leg move as one piece. There is no drilling, no welding, and no adapter kit, which makes this the practical retrofit for tables and stands that were delivered on bullet feet. The same grip principle means the casters come back out if the table ever needs to return to fixed feet.
Low Profile 4 Inch Installed Height
Overall height is 4 inches, so a standard 34 inch work table lands close to its original working height instead of climbing to a level where the cutting board sits uncomfortably high for shorter cooks. Wheel width is 1 1/4 inches, keeping the footprint tight under slim tubular legs. The set weighs 7 pounds, light enough to install all four corners in a few minutes with the table tipped on its side.
Polyurethane Tread with Two Brakes for Prep Work
The wheel centers are polypropylene and the tread is polyurethane, a pairing that rolls smoothly over tile and quarry floor without the chatter or scuff marks of hard plastic wheels. During knife work you want the table planted, so the two braked casters lock the station in place; when the rush ends, release the levers and wheel the whole bench to the dish pit side for a full wipe-down. Stainless steel bracket construction keeps daily splash and mop chemicals from corroding the swivels.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Set of four 3 inch low profile swivel stem casters for work tables and equipment stands
-
Expanding post stems grip the inside of tubular legs, no drilling or welding
-
1.42 inch plastic expanding post fits open-bottom table legs
-
Two casters with brakes hold the table steady during knife work
-
Low 4 inch installed height keeps the work surface near its original level
-
Polyurethane tread rolls quietly without scuffing tile floors
-
Polypropylene wheel centers keep the set light
-
Stainless steel construction stands up to mop water and cleaning chemicals
Free Shipping 48 Contiguous states & DC only.
In Stock: Ships in 1-2 Business Days
Set of four 3 inch low profile swivel stem casters for work tables and equipment stands
Expanding post stems grip the inside of tubular legs, no drilling or welding
1.42 inch plastic expanding post fits open-bottom table legs
Two casters with brakes hold the table steady during knife work
Low 4 inch installed height keeps the work surface near its original level
The Prepline PPEC-3-SB Casters
The Prepline PPEC-3-SB is a set of four 3 inch low profile swivel casters with expanding stem posts, made to slide into the tubular legs of a work table or equipment stand and turn a stationary station into a rolling one. Two of the four casters have brakes and two roll free. Kitchens buy these for one reason above all: a prep table that rolls can be pulled out for the floor mop and pushed back in seconds, where a fixed table means sweeping around the same four legs every night and hoping the inspector never looks underneath.
1.42 Inch Expanding Stem That Grips from Inside the Leg
Instead of bolting to a plate, each caster carries a 1.42 inch plastic expanding post. Slide the post into the open bottom of a tubular table leg, tighten it, and the post expands against the inside wall of the tube until the caster and leg move as one piece. There is no drilling, no welding, and no adapter kit, which makes this the practical retrofit for tables and stands that were delivered on bullet feet. The same grip principle means the casters come back out if the table ever needs to return to fixed feet.
Low Profile 4 Inch Installed Height
Overall height is 4 inches, so a standard 34 inch work table lands close to its original working height instead of climbing to a level where the cutting board sits uncomfortably high for shorter cooks. Wheel width is 1 1/4 inches, keeping the footprint tight under slim tubular legs. The set weighs 7 pounds, light enough to install all four corners in a few minutes with the table tipped on its side.
Polyurethane Tread with Two Brakes for Prep Work
The wheel centers are polypropylene and the tread is polyurethane, a pairing that rolls smoothly over tile and quarry floor without the chatter or scuff marks of hard plastic wheels. During knife work you want the table planted, so the two braked casters lock the station in place; when the rush ends, release the levers and wheel the whole bench to the dish pit side for a full wipe-down. Stainless steel bracket construction keeps daily splash and mop chemicals from corroding the swivels.
About Prepline
Prepline designs practical food preparation equipment for demanding kitchen environments. From planetary mixers and meat grinders to stainless steel worktables, sinks, and equipment stands, Prepline products are engineered for daily use in restaurants, cafeterias, and institutional kitchens. Known for straightforward construction and solid performance, the line is a reliable choice for operators who prioritize uptime and value. Parts and support are readily accessible through established service channels, making Prepline a dependable option for large-scale operations and independent businesses alike.
Features & Benefits
-
Set of four 3 inch low profile swivel stem casters for work tables and equipment stands
-
Expanding post stems grip the inside of tubular legs, no drilling or welding
-
1.42 inch plastic expanding post fits open-bottom table legs
-
Two casters with brakes hold the table steady during knife work
-
Low 4 inch installed height keeps the work surface near its original level
-
Polyurethane tread rolls quietly without scuffing tile floors
-
Polypropylene wheel centers keep the set light
-
Stainless steel construction stands up to mop water and cleaning chemicals
Resources & Downloads
See all from Prepline
Specifications
| Wheel Diameter | 3" |
| Overall Width | 1 1/4" |
| Overall Height (Installed) | 4" |
| Stem Type | Expanding post |
| Stem Post Expansion | 1.42" |
| Set Quantity | 4 |
| Brakes | (2) with brakes, (2) without |
| Material | Stainless Steel and Polypropylene |
| Tread Material | Polyurethane |
| Unit Weight | 7 lb. |
| Shipping Weight | 8 lb. |
Manufacturer's Warranty
-
1 Year
Labor
-
1 Year
Parts
Set of four 3 inch low profile swivel stem casters for work tables and equipment stands